SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
M
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
MJTP SERIES 6MM
THRU-HOLE MTG.
TACT SWITCHES
FEATURES
Numerous single pole-single throw momentary configurations.
Excellent tactile feed-back (Snap dome).
Ultra-compact size.
Long operating life for high reliability.
Molded-in terminals minimize wicking of flux or solder.
MATERIALS Case: Thermoplastic, color black. UL94HB Standard.
Actuator: Thermoplastic, color black unless otherwise specfied.
Cover/Bracket: PET film, tin plated brass or stainless steel.
Terminals: Silver plated brass.
Shorting Contact: Phosphor bronze or stainless steel with silver plating.
L.E.D. rating: Forward voltage- 2.1 V (3.0 V Max.). Cont. fwd. current 20mA max.@ 25°C.
GENERAL SPECIFICATIONS
ELECTRICALS
Contact rating: 50 mA @ 12 VDC
Insulation resistance: 100 megohms min. (100 VDC)
Dielectric withstanding voltage: 250 VAC for 1 minute
Contact resistance: 100 milliohms max. @ 5 VDC, 10 mA
Electrical life: 100,000 cycles min. (except models MJTP1243 & 1250- 50,000 cycles)
1,000,000 cycles available - consult factory
Contact bounce: less than 10 msec.
MECHANICALS, THERMALS, ENVIRONMENTALS
Plunger travel: .010"+ .008", - .004" (0,25 +0,2, -0,1 mm)
Actuation force: 160 grams ±30 grams
Operating temperature range: -20°C to +70°C
Storage temperature range: -30°C to +80°C for 96 hours
Shock resistance: 30G per method 213, MIL-STD-202
Vibration resistance: passes method 201, MIL-STD-202
SOLDERING (note - non-washable except for models indicated 'process compatible' below).
IR reflow soldering: 240°C max. for 20 seconds max.
Wave soldering: 255°C max. for 5 seconds max.
Hand soldering: 320°C max. for 3.5 seconds max. (40 watt iron max.)
MJTP1105T
Right angle,
grounding
US # MJTP1109
EU # PHAP3350
Process
compatible,
grounding
Caps available -
see end of section.
Bulk packaged.
Bulk packaged.
Gold plating avail-
able on contacts &
terminals
- consult factory.
M3
US Model Dim. EU Model
No. L (In./mm) No.
MJTP1109 .197 (5.0) PHAP3350
MJTP1109A .354 (9.0) PHAP3350A
MJTP1109B .512 (13.0) PHAP3350B
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
M
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
US # MJTP1117
EU # PHAP3363
Right angle,
grounding
US # MJTP1119
EU # PHAP3351
Process compatible
US # MJTP1129
EU # PHAP1152
Right angle,
grounding,
process
compatible
US # MJTP1141
EU # PHAP3307
Long terminals
Bulk packaged.
Bulk packaged.
Packaged on tape. Note: other
models available with this tape
packaging - consult factory.
New!
New!
M4
Bulk packaged.
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1119 .197 (5.0) PHAP3351
MJTP1119A .354 (9.0) PHAP3351A
MJTP1119B .512 (13.0) PHAP3351B
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1129 .171 (4.35) PHAP3352
MJTP1129A .329 (8.35) PHAP3352A
MJTP1129B .486 (12.35) PHAP3352B
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1141 .169 (4.3) PHAP3307
MJTP1141A .197 (5.0) PHAP3307A
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
M
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
US # MJTP1193
EU # PHAP3308
With L.E.D.
Caps available with lens -
see end of section.
Bulk packaged.
Note: LED
cathode is
marked
with a dot
M5
New!
US # MJTP1230
EU # PHAP3301
Bulk packaged.
US # MJTP1234
EU # PHAP3303
US # MJTP1232
EU # PHAP3302
Grounding
Caps available -
see end of section.
Bulk packaged.
US Model L.E.D. EU Model
No. Color No.
MJTP1193 No L.E.D. PHAP3308
MJTP11936 Red PHAP3308R
MJTP11935 Yellow PHAP3308Y
MJTP11933 Green PHAP3308G
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1230 .170 (4,3) PHAP3301
MJTP1230A .197 (5,0) PHAP3301A
MJTP1230B .374 (9,5) PHAP3301B
MJTP1230C .315 (8,0) PHAP3301C
MJTP1230D .512 (13,0) PHAP3301D
MJTP1230E .287 (7,3) PHAP3301E
MJTP1230F .335 (8,5) PHAP3301F
MJTP1230G .275 (7,0) N/A
Bulk packaged.
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1232 .170 (4,3) PHAP3302
MJTP1232A .197 (5,0) PHAP3302A
MJTP1232B .374 (9,5) PHAP3302B
MJTP1232C .315 (8,0) PHAP3302C
MJTP1232D .512 (13,0) PHAP3302D
MJTP1232E .287 (7,3) PHAP3302E
MJTP1232F .335 (8,5) PHAP3302F
MJTP1232G .275 (7,0) PHAP3302G
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1234 .094 (2,4) PHAP3303
MJTP1234A .110 (2,8) PHAP3303A
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
M
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
US # MJTP1243 &
MJTP1250
US # MJTP1236
EU # PHAP3305
Right angle,
grounding
US # Model Dim. Dim.
No. L1(in./mm) L (in./mm)
MJTP1243 .169 (4,3) .307 (7,8)
MJTP1250 .197 (5,0) .335 (8,5)
Bulk packaged.
M6
US # MJTP2205
EU # PHAP3306
2 switch vertical
gang assembly,
black actuators
14
23
Bulk packaged.
US Model Dim. EU Model
No. L (in./mm) No.
MJTP1236 .124 (3,1) PHAP3305
MJTP1236A .152 (3,9) PHAP3305A
MJTP1236B .329 (8,4) PHAP3305B
MJTP1236C .270 (6,9) PHAP3305C
MJTP1236D .466 (11,9) PHAP3305D
MJTP1236E .244 (6,2) PHAP3305E
MJTP1236F .289 (7,3) N/A
MJTP1236G.230 (5,8) N/A
Bulk packaged.
US Model Dim. EU Model
No. L (in./mm) No.
MJTP2205 .124 (3,15) PHAP3306
MJTP2205A .152 (3,85) PHAP3306A
MJTP2205B .329 (8,35) PHAP3306B
MJTP2205C .270 (6,85) PHAP3306C
MJTP2205D .466 (11,85)PHAP3306D
MJTP2205E .242 (6,15) PHAP3306E
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
M
APEM
, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com
US # MJTPSHW
Bulk packaged.
MJTP1105
MJTP1117
MJTP1129
MJTP1141
MJTP1144
MJTP1145
New!
US # Model Dim.
No. L (in./mm)
MJTPSHW .122 (3,1)
MJTPSHWA .091 (2,3)
MJTPSHWB .146 (3,8)
Process
compatible
M7
MJ61 Square cap MJ62 Round cap
CAPS (for MJTP1105T and MJTP1234 only) CAPS (for MJTP1193 only) CAP COLORS
Note - add digit from table to
cap part number for color.
Example - MJ612 indicates
square black cap.
No. Color
1blue
2black
3green
5yellow
6red
7ivory
MJ3 Square cap (w/clear lens in center for LED illumina-
tion)
MJTP1109
MJTP1119
MJTP1193
MJTP1230
MJTP1232
SCHEMATICS
Note: LED is for
MJTP1193 only.
MJTP1234
MJTP2205
MJTP4102
MJTP5302
MJTPSHW
MJTP1236
MJTP1243
MJTP1250
MJTP2205
MJTP4102
MJTP5302
Layout tolerances; Linear: ± .004" ( ± 0,1MM) Holes: ± .002" ( ± 0,05MM)
MJTP1141, 44 & 45 MJTP1193 MJTP1230 MJTP1232 MJTP1234
MJTP1236 MJTP1243 MJTP1250 MJTPSHW
MJTP4102 MJTP5302 MJTP2205
MJTP1105T MJTP1109 MJTP1117 MJTP1119 MJTP1129
PRINTED CIRCUIT BOARD LAYOUTS
1
2
34
