LTST-C170GKT - Lite-On Technology Corporation

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Features

* Package in 8mm tape on 7" diameter reels.

* Compatible with automatic placement equipment.

* Compatible with infrared and vapor phase reflow solder process.

* EIA STD package.

* I.C. compatible.

Package Dimensions

Part no. Lens Source Color

LTST-C170GKT Water Clear GaP on GaP Green

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1mm (.004") unless otherwise noted.

Part No. : LTST-C170GKT Page : 1 of 7

BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Absolute Maximum Ratings At Ta=25℃

Parameter LTST-C170GKT

Unit

Power Dissipation 100 mW

Peak Forward Current

(1/10 Duty Cycle, 0.1ms Pulse Width) 120 mA

Continuous Forward Current 30 mA

Derating Linear From 50℃ 0.6 mA/℃

Reverse Voltage 5 V

Operating Temperature Range -55℃ to + 85℃

Storage Temperature Range -55℃ to + 85℃

Wave Soldering Condition 260°C For 5 Seconds

Infrared Soldering Condition 260°C For 5 Seconds

Vapor Phase Soldering Condition 215°C For 3 Minutes

Su

gg

est IR Reflow Condition :

Part No. : LTST-C170GKT Page : 2 of 7

BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Electrical Optical Characteristics At Ta=25℃

Parameter Symbol Part No.

LTST- Min. Typ. Max. Unit Test Condition

Luminous Intensity IV C170GKT 1.6 6.0 mcd IF = 10mA

Note 1

Viewing Angle 2θ1/2 C170GKT 130 deg Note 2 (Fig.6)

Peak Emission Wavelength λPeak C170GKT 565 nm Measurement

@Peak (Fig.1)

Dominant Wavelength λd C170GKT 569 nm Note 3

Spectral Line Half-Width Δλ C170GKT 30 nm

Forward Voltage VF C170GKT 2.1 2.6 V IF = 20mA

Reverse Current IR C170GKT 100 μA VR = 5V

Capacitance C C170GKT 35 PF VF = 0

f = 1MHZ

Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the

CIE eye-response curve.

2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the

single wavelength which defines the color of the device.

Part No. : LTST-C170GKT Page : 3 of 7

BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Bin Code List

Part No. : LTST-C170GKT Page : 4 of 7

BNS-OD-C131/A4

Luminous Intensity Unit : mcd @10mA

Bin Code Min. Max.

G 1.6 3.2

H 2.5 5.0

J 4.0 8.0

K 6.3 12.5

L 10.0 20.0

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Typical Electrical / Optical Characteristics Curves

(25℃ Ambient Temperature Unless Otherwise Noted)

Part No. : LTST-C170GKT Page : 5 of 7

BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Cleaning

Do not use unspecified chemical liquid to clean LED they could harm the package.

If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature

for less one minute.

Suggest Soldering Pad Dimensions

Package Dimensions Of Tape And Reel

Notes:

1. All dimensions are in millimeters (inches).

Part No. : LTST-C170GKT Page : 6 of 7

BNS-OD-C131/A4

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Notes:

1. Empty component pockets sealed with top cover tape.

2. 7 inch reel-3000 pieces per reel.

3. The maximum number of consecutive missing lamps is two.

4. In accordance with ANSI/EIA 481-1-A-1994 specifications.

Part No. : LTST-C170GKT Page : 7 of 7

BNS-OD-C131/A4