LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Features * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Part no. Lens LTST-C170GKT Water Clear Source Color GaP on GaP Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1mm (.004") unless otherwise noted. Part No. : LTST-C170GKT BNS-OD-C131/A4 Page : 1 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Absolute Maximum Ratings At Ta=25 Parameter LTST-C170GKT Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 120 mA Continuous Forward Current 30 mA Derating Linear From 50 0.6 mA/ Reverse Voltage 5 V Operating Temperature Range -55 to + 85 Storage Temperature Range -55 to + 85 Wave Soldering Condition 260C For 5 Seconds Infrared Soldering Condition 260C For 5 Seconds Vapor Phase Soldering Condition 215C For 3 Minutes Suggest IR Reflow Condition : Part No. : LTST-C170GKT BNS-OD-C131/A4 Page : 2 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Electrical Optical Characteristics At Ta=25 Parameter Symbol Luminous Intensity Part No. LTST- Unit Test Condition 6.0 mcd IF = 10mA Note 1 Min. Typ. 1.6 Max. IV C170GKT Viewing Angle 21/2 C170GKT 130 deg Note 2 (Fig.6) Peak Emission Wavelength Peak C170GKT 565 nm Measurement @Peak (Fig.1) Dominant Wavelength d C170GKT 569 nm Note 3 Spectral Line Half-Width C170GKT 30 nm Forward Voltage VF C170GKT 2.1 Reverse Current IR C170GKT Capacitance C C170GKT 35 2.6 V IF = 20mA 100 A VR = 5V PF VF = 0 f = 1MHZ Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-C170GKT BNS-OD-C131/A4 Page : 3 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Bin Code List Luminous Intensity Part Bin Code Min. Max. G 1.6 3.2 H 2.5 5.0 J 4.0 8.0 K 6.3 12.5 L 10.0 20.0 No. : LTST-C170GKT BNS-OD-C131/A4 Unit : mcd @10mA Page : 4 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Typical (25 Part No. : LTST-C170GKT BNS-OD-C131/A4 Electrical Ambient / Optical Characteristics Curves Temperature Unless Otherwise Noted) Page : 5 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-C170GKT BNS-OD-C131/A4 Page : 6 of 7 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-3000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-C170GKT BNS-OD-C131/A4 Page : 7 of 7