Control- and safety isolating- resp. isolating transformer ST 100/4/23 Advantages Very good switch-on behaviour thanks to reduced starting currents High performance for the volume thanks to compact design Primary side 5 % tappings for voltage adjustment Very good corrosion protection and low noise thanks to BLOCKIMPEX vacuum impregnation Contact protected screw connection terminals complying with UVV BGV A3 Simple mounting thanks to robust metal footplate with oval slots Applications As a control transformer for the electrical isolation of the input and output sides.The construction of the transformer to supply control systems according to VDE 0113 is designed. As an isolating transformer for the safe electrical isolation of the input and output sides. The transformer may be used to set up protective separation as a protective measure in accordance with VDE 0100. As a safety isolating transformer for the safe electrical isolation of the input and output sides. The transformer is suitable for creating SELV and PELV circuits because of the limit on the output voltage. Standards |"Z Control transformer to: VDE 0570 Teil 2-2, DIN EN 61558-2-2, EN 61558-2-2, IEC 61558-2-2, UL 5085-1/-2, CSA 22.2 No.66 Isolating transformer to: VDE 0570 Part 2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66 Approvals W vZ ENEC 10 (VDE), UL 5085-1/-2, CSA 22.2 No.66 Control- and safety isolating- resp. isolating transformer ST 100/4/23 ST 100/4/23 Rated input voltage Tappings Input Rated frequency 400 Vac 5 % 50 - 60 Hz Output Rated output voltage Rated power VDE (DB cos phi=1) Rated power VDE (KB cos phi=0.5) No-load voltage (app. x factor) Efficiency Type ST 100/4/23 Terminal and mounting Screw-type terminals, PE 6.3 x 0.8 Base plate M4 Terminals Fixing method Fixing screws Measures and weights 230 Vac 100 VA 225 VA 1.10 86 % 2.00 kg Weight 53.0 Standards Classification Control- and isolating transformer Approvals Approvals cURus, ENEC 10 (VDE) 95.0 Environment Ambient temperature max. Cooling method 40 C by self-cooling Safety and protection Type Class of Insulation System Protection index Safety class (prepared) Short circuit strength open type VDE=B, UL=class 105 IP 00 I non-short-circuit proof 64.0 84.0 63.5 76.0 PRI Fusing recommendation by circuit breaker with tripping characteristic type 20 x Irated related to set) Setting range Setting value 0.25 - 0.40 A 0.29 A Order numbers Order Number ST 100/4/23 Subjects to change. + Input 30 Type