TE Analog Devices Welcomes Hittite Microwave Corporation O B SO LE NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com TE O B SO LE THIS PAGE INTENTIONALLY LEFT BLANK HMC219AMS8 / 219AMS8E v00.0810 10 - 1 Typical Applications Features The HMC219AMS8 / HMC219AMS8E is ideal for: Ultra Small Package: MSOP8 * UNII & HiperLAN Conversion Loss: 8.5 dB * ISM LO / RF Isolation: 25 dB TE * Microwave Radios Functional Diagram General Description B SO LE The HMC219AMS8 & HMC219AMS8E are ultra miniature double-balanced mixers in 8 lead plastic surface mount packages (MSOP). This passive MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The consistent MMIC performance will improve system operation and assure regulatory compliance. Electrical Specifications, TA = +25 C, As a Function of LO Drive O MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz LO = +13 dBm IF = 100 MHz Parameter Min. Typ. LO = +11 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 4.5 - 9.0 4.5 - 8.6 GHz Frequency Range, IF DC - 2.5 DC - 2.5 GHz Conversion Loss 8.5 10 8.5 10 dB Noise Figure (SSB) 8.5 10 8.5 10 dB LO to RF Isolation 17 25 20 25 dB LO to IF Isolation 17 25 20 25 dB IP3 (Input) 15 21 15 21 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219AMS8 / 219AMS8E v00.0810 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Conversion Loss vs Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 -10 -30 -40 TE -40 C +25 C +85 C -15 -20 RF/IF LO/IF LO/RF -50 -60 4 5 6 7 8 9 4 10 5 7 8 9 10 LE Conversion Loss vs. LO Drive Return Loss @ LO = +13 dBm 0 0 -5 -10 B SO -5 +9 dBm +11 dBm +13 dBm +15 dBm -15 -20 4 5 6 7 8 9 -10 -15 RF IF LO -20 -25 0 10 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) FREQUENCY (GHz) P1dB vs. Temperature LO = +13 dBm O IF Bandwidth @ LO = +13 dBm 0 14 -5 13 P1dB (dBm) CONVERSION LOSS (dB) 6 FREQUENCY (GHz) FREQUENCY (GHz) -10 -15 12 11 -40 C +25 C +85 C 10 -20 MIXERS - SINGLE & DOUBLE BALANCED - SMT ISOLATION (dB) -10 -20 CONVERSION LOSS (dB) 10 -5 RETURN LOSS (dB) CONVERSION LOSS (dB) 0 9 -25 0 0.5 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 4 4 5 6 7 8 9 10 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC219AMS8 / 219AMS8E v00.0810 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Input IP3 vs. Temperature @ LO = +13 dBm 10 - 3 27 25 25 23 21 19 +11 dBm +13 dBm +15 dBm 23 21 19 TE INPUT IP3 (dBm) 27 17 -40 C +25 C +85 C 17 15 15 4 5 6 7 8 9 4 10 5 6 7 8 9 10 9 10 LO FREQUENCY (GHz) LO FREQUENCY (GHz) LE Input IP2 vs. Temperature @ LO = +13 dBm Input IP2 vs. Drive 60 60 30 B SO 40 INPUT IP2 (dBm) 50 50 INPUT IP2 (dBm) 40 30 -40 C +25 C +85 C +11 dBm +13 dBm +15 dBm 20 4 5 6 7 8 LO FREQUENCY (GHz) 9 10 20 4 5 6 7 8 LO FREQUENCY (GHz) O MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 INPUT IP3 (dBm) Input IP3 vs. LO Drive For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219AMS8 / 219AMS8E v00.0810 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Harmonics of LO nLO nLO Spur at RF Port 0 1 2 3 4 1 2 3 4 0 xx 9 12 16 34 4.0 31 22 32 58 1 19 0 22 32 49 5.0 32 21 30 47 2 62 63 59 62 66 6.0 40 28 28 49 3 80 69 82 69 79 7.0 32 35 53 48 4 79 81 81 80 83 8.0 27 40 57 55 9.0 22 52 48 xx Absolute Maximum Ratings +13 dBm LO Drive +27 dBm Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS B SO RF / IF Input LO = +13 dBm Values in dBc below input LO level measured at the RF port. LE RF = 6 GHz @ -10 dBm LO = 6.1 GHz @ +13 dBm All values in dBc below the IF power level (-1RF + 1LO). TE mRF LO Freq. (GHz) Class 1A O ESD Sensitivity (HBM) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 MIXERS - SINGLE & DOUBLE BALANCED - SMT MxN Spurious Outputs 10 - 4 HMC219AMS8 / 219AMS8E v00.0810 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Outline Drawing 10 - 5 TE LE B SO NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information O MIXERS - SINGLE & DOUBLE BALANCED - SMT 10 Part Number Package Body Material Lead Finish MSL Rating HMC219AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC219AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] 219A XXXX 219A XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC219AMS8 / 219AMS8E v00.0810 GaAs MMIC SMT DOUBLEBALANCED MIXER, 4.5 - 9 GHz Evaluation Circuit Board O List of Materials for Evaluation PCB 103350 Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC219AMS8 / HMC219AMS8E Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - SINGLE & DOUBLE BALANCED - SMT B SO LE TE 10 10 - 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC219AMS8ETR HMC219AMS8E 103350-HMC219AMS8 HMC219AMS8 HMC219AMS8TR