Recommended soldering condition Fundamental structure Characteristics Reliability SVPF Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP 10TPE47MAZB Items Condition Specifications Explanation of part numbers Packing specifications haracteristics 47.0 35 1400 3 3 8.0 80.0 35 1400 3 3 6TPE220MAZB 6.3 85 220 5.0 105 10.0 138.6 35 1400 3 3 6TPE220MAPB2 6.3 85 220 5.0 105 10.0 138.6 25 1400 3 3 6TPE150MAZB 6.3 85 150 5.0 105 8.0 94.5 35 1400 3 3 6TPE150MAPB 6.3 85 150 5.0 105 8.0 94.5 25 1600 3 3 SVPF SVPE 6.3 8.0 10 7.2 9.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Rated capacitance range (F) 120Hz/20 47 to 470 Dissipation Factor (DF) 120Hz/20 Please see the attached characteristics list 6TPE120MAZB 6.3 85 120 5.0 105 8.0 75.6 35 1400 3 3 Rated voltage applied, after 5 minutes Please see the attached characteristics list 6TPE100MPB 6.3 105 100 6.3 105 8.0 63.0 25 1600 3 3 100kHz/20 Please see the attached characteristics list 6TPE100MAZB 6.3 85 100 5.0 105 8.0 63.0 35 1400 3 3 -55 Z/Z20 0.6 to 2.0 4TPE220MAZB 4.0 85 220 3.2 105 8.0 88.0 35 1400 3 3 105 Z/Z20 0.6 to 2.0 4TPE150MAZB 4.0 85 150 3.2 105 8.0 60.0 35 1400 3 3 C/C Within20% of the initial value 4TPE150MAUB 4.0 85 150 3.2 105 8.0 60.0 30 1500 3 3 4.0 105 100 4.0 105 8.0 40.0 35 1400 3 3 2.5 85 330 2.0 105 8.0 82.5 35 1400 3 3 105, 1,000h rated voltage applied Rated temp. 85 products: 85, 1,000h, rated voltage applied Damp heat (Steady State) DF 60, 90 to 95%RH, 500h, No-applied voltage < 1.5 times of the initial limit B2 4TPE100MZB LC Within the initial limit C/C Within50%, -202R5TPE220MDGB(MAZB,MAPB,MAFB), 2R5TPE330MAZB,2TPE330MFB(MAFB,MADGB) ETPE330MA9GB,2TPE470MAJGB DF < LC 105, 1,000 cycles, 1k discharge resistance,surge voltage applied Rated temp 85 products:85 2.5 85 330 2.0 105 8.0 165.0 2R5TPE220MZB 2.5 105 220 2.5 105 8.0 1.5 times of the initial limit 2R5TPE220MLB 2.5 105 220 2.5 105 8.0 3 times of the initial limit 2R5TPE220MFGB 2.5 105 220 2.5 105 8.0 < C/C Within5% of the initial value 2R5TPE220MDGB 2.5 105 220 2.5 105 8.0 DF Within the initial limit 2R5TPE220MAZB 2.5 85 220 2.0 105 8.0 2R5TPE220MAPB 2.5 85 220 2.0 105 2R5TPE220MAFB 2.5 85 220 2.0 105 2TPE470MAJGB 2.0 85 470 1.8 105 10.0 2TPE330MFB 2.0 105 330 2.0 105 2TPE330MAFB 2.0 85 330 1.8 2TPE330MADGB 2.0 85 330 1.8 LC < 3 times of the initial limit Size list Dimensions RV L F 2.0 RV : Rated voltage 2.5 4.0 6.3 8.0 47 100 B2 120 H S W1 10 B2 B2 B2 220 S 2R5TPE330MAZB ETPE330MA9GB2 Within40%, -20% of the initial value (Except for the above model) B2 330 B2 470 B2 B2 B2 B2 B2 B2 B2 Recommended soldering condition 105 4.6 100kHz/20 Packing specifications Radial lead type 6.3 4.0 Characteristics of impedance ratio at high temp. and low temp. Packing specifications SMD type 100 2.9 Equivalent series resistance (ESR) Products list 85 2.5 Leakage current Image of case size 8.0 2.3 Capacitance tolerance Series system diagram 8TPE100MAZB 2.0 Surge Technical data Fundamental structure 8.0 - 150 Recommended soldering condition 250 105 - Marking Recommended land pattern dimension 8.0 (V) W Products list 260 47 (V) Selection guide Image of case size 85 Surge voltage Guidelines and precautions for use Series system diagram 10 Rated voltage Catalog Deletion and EOL series POSCAP Line-up Part number Maximum allowable MSL Rated Category Category ESR LC Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < Selection guide Specifications Endurance SVP Size code 9/300kHz 3200 3 3 55.0 35 1400 3 3 55.0 21 1700 3 3 110.0 15/300kHz 1800 3 3 110.0 13/300kHz 2000 3 3 55.0 35 1400 3 3 8.0 55.0 25 1600 3 3 8.0 110.0 15 2000 3 3 188.0 11/300kHz 2300 3 3 8.0 132.0 15 2000 3 3 105 8.0 132.0 15 2000 3 3 105 8.0 132.0 13/300kHz 2000 3 3 1 100k to 500kHz,45 2 Under development Technical data Packing specifications Radial lead type TPE series characteristics list Guidelines and precautions for use Fundamental structure Characteristics Reliability Surface mount type Packing specifications SMD type TPE series has low ESR and can aid in creating thinner and smal smaller products. This page focuses on the smaller packages within the series. TPE Series SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF Radial lead type Products list Surface mount type OS-CON Line-up SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Selection guide Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPESeries RoHS compliance Low ESR (B2,C2,C3 size) Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data Surface mount type OS-CON Line-up Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Reliability (unit: mm) Size code TPH TPSF TPE TPE TPB/TPC TPLTPLF TPF TA Surface mount type TPG B2 L 0.2 3.5 W 0.2 2.8 H 0.1 1.9 S 0.2 0.8 W1 TPU TPH 0.1 2.2 Surface mount type TPU TPG TPSF TPE TPE TPB/TPC TPLTPLF TPF TA TV TV TH TH TQC TQC Catalog Deletion and EOL models 92 Catalog Deletion and EOL models 93 Recommended soldering condition Fundamental structure Characteristics Reliability SVPF Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP 10TPE47MAZB Items Condition Specifications Explanation of part numbers Packing specifications haracteristics 47.0 35 1400 3 3 8.0 80.0 35 1400 3 3 6TPE220MAZB 6.3 85 220 5.0 105 10.0 138.6 35 1400 3 3 6TPE220MAPB2 6.3 85 220 5.0 105 10.0 138.6 25 1400 3 3 6TPE150MAZB 6.3 85 150 5.0 105 8.0 94.5 35 1400 3 3 6TPE150MAPB 6.3 85 150 5.0 105 8.0 94.5 25 1600 3 3 SVPF SVPE 6.3 8.0 10 7.2 9.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Rated capacitance range (F) 120Hz/20 47 to 470 Dissipation Factor (DF) 120Hz/20 Please see the attached characteristics list 6TPE120MAZB 6.3 85 120 5.0 105 8.0 75.6 35 1400 3 3 Rated voltage applied, after 5 minutes Please see the attached characteristics list 6TPE100MPB 6.3 105 100 6.3 105 8.0 63.0 25 1600 3 3 100kHz/20 Please see the attached characteristics list 6TPE100MAZB 6.3 85 100 5.0 105 8.0 63.0 35 1400 3 3 -55 Z/Z20 0.6 to 2.0 4TPE220MAZB 4.0 85 220 3.2 105 8.0 88.0 35 1400 3 3 105 Z/Z20 0.6 to 2.0 4TPE150MAZB 4.0 85 150 3.2 105 8.0 60.0 35 1400 3 3 C/C Within20% of the initial value 4TPE150MAUB 4.0 85 150 3.2 105 8.0 60.0 30 1500 3 3 4.0 105 100 4.0 105 8.0 40.0 35 1400 3 3 2.5 85 330 2.0 105 8.0 82.5 35 1400 3 3 105, 1,000h rated voltage applied Rated temp. 85 products: 85, 1,000h, rated voltage applied Damp heat (Steady State) DF 60, 90 to 95%RH, 500h, No-applied voltage < 1.5 times of the initial limit B2 4TPE100MZB LC Within the initial limit C/C Within50%, -202R5TPE220MDGB(MAZB,MAPB,MAFB), 2R5TPE330MAZB,2TPE330MFB(MAFB,MADGB) ETPE330MA9GB,2TPE470MAJGB DF < LC 105, 1,000 cycles, 1k discharge resistance,surge voltage applied Rated temp 85 products:85 2.5 85 330 2.0 105 8.0 165.0 2R5TPE220MZB 2.5 105 220 2.5 105 8.0 1.5 times of the initial limit 2R5TPE220MLB 2.5 105 220 2.5 105 8.0 3 times of the initial limit 2R5TPE220MFGB 2.5 105 220 2.5 105 8.0 < C/C Within5% of the initial value 2R5TPE220MDGB 2.5 105 220 2.5 105 8.0 DF Within the initial limit 2R5TPE220MAZB 2.5 85 220 2.0 105 8.0 2R5TPE220MAPB 2.5 85 220 2.0 105 2R5TPE220MAFB 2.5 85 220 2.0 105 2TPE470MAJGB 2.0 85 470 1.8 105 10.0 2TPE330MFB 2.0 105 330 2.0 105 2TPE330MAFB 2.0 85 330 1.8 2TPE330MADGB 2.0 85 330 1.8 LC < 3 times of the initial limit Size list Dimensions RV L F 2.0 RV : Rated voltage 2.5 4.0 6.3 8.0 47 100 B2 120 H S W1 10 B2 B2 B2 220 S 2R5TPE330MAZB ETPE330MA9GB2 Within40%, -20% of the initial value (Except for the above model) B2 330 B2 470 B2 B2 B2 B2 B2 B2 B2 Recommended soldering condition 105 4.6 100kHz/20 Packing specifications Radial lead type 6.3 4.0 Characteristics of impedance ratio at high temp. and low temp. Packing specifications SMD type 100 2.9 Equivalent series resistance (ESR) Products list 85 2.5 Leakage current Image of case size 8.0 2.3 Capacitance tolerance Series system diagram 8TPE100MAZB 2.0 Surge Technical data Fundamental structure 8.0 - 150 Recommended soldering condition 250 105 - Marking Recommended land pattern dimension 8.0 (V) W Products list 260 47 (V) Selection guide Image of case size 85 Surge voltage Guidelines and precautions for use Series system diagram 10 Rated voltage Catalog Deletion and EOL series POSCAP Line-up Part number Maximum allowable MSL Rated Category Category ESR LC Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < Selection guide Specifications Endurance SVP Size code 9/300kHz 3200 3 3 55.0 35 1400 3 3 55.0 21 1700 3 3 110.0 15/300kHz 1800 3 3 110.0 13/300kHz 2000 3 3 55.0 35 1400 3 3 8.0 55.0 25 1600 3 3 8.0 110.0 15 2000 3 3 188.0 11/300kHz 2300 3 3 8.0 132.0 15 2000 3 3 105 8.0 132.0 15 2000 3 3 105 8.0 132.0 13/300kHz 2000 3 3 1 100k to 500kHz,45 2 Under development Technical data Packing specifications Radial lead type TPE series characteristics list Guidelines and precautions for use Fundamental structure Characteristics Reliability Surface mount type Packing specifications SMD type TPE series has low ESR and can aid in creating thinner and smaller products. This page focuses on the smaller packages within the series. TPE Series SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF Radial lead type Products list Surface mount type OS-CON Line-up SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Selection guide Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPESeries RoHS compliance Low ESR (B2,C2,C3 size) Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data Surface mount type OS-CON Line-up Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Reliability (unit: mm) Size code TPH TPSF TPE TPE TPB/TPC TPLTPLF TPF TA Surface mount type TPG B2 L 0.2 3.5 W 0.2 2.8 H 0.1 1.9 S 0.2 0.8 W1 TPU TPH 0.1 2.2 Surface mount type TPU TPG TPSF TPE TPE TPB/TPC TPLTPLF TPF TA TV TV TH TH TQC TQC Catalog Deletion and EOL models 92 Catalog Deletion and EOL models 93 Fundamental structure Characteristics Reliability Items Condition (V) - 2.5 4.0 6.3 10 Surge voltage (V) - 2.9 4.6 7.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Surface mount type SVPE Rated capacitance range (F) 120Hz/20 68 to 1,500 SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP Explanation of part numbers Packing specifications Fundamental structure haracteristics TPH TPSF Surface mount type TPG 105 10 68.0 25 2400 3 2a 330 5.0 105 10 207.9 25 2400 3 2a 6TPE220MAP 6.3 85 220 5.0 105 10 138.6 25 2400 3 2a 6TPE220M 6.3 105 220 6.3 105 10 138.6 25 2400 3 2a 6TPE220MI 6.3 105 220 6.3 105 10 138.6 18 2800 3 2a 6TPE150M 6.3 105 150 6.3 105 10 94.5 25 2400 3 2a 6TPE150MI 6.3 105 150 6.3 105 10 94.5 18 2800 3 2a 10 10 94.5 15 3100 3 2a 10 63.0 25 2400 3 2a 100kHz/20 Please see the attached characteristics list 6TPE100MI 6.3 105 100 6.3 105 10 63.0 18 2800 3 2a 4TPE330M 4.0 105 330 4.0 105 10 132.0 25 2400 3 2a 4TPE330MI 4.0 105 330 4.0 105 10 132.0 18 2800 3 2a 4TPE220M 4.0 105 220 4.0 105 10 88.0 25 2400 3 2a 4TPE220MI 4.0 105 220 4.0 105 10 88.0 18 2800 3 2a 4TPE220MF 4.0 105 220 4.0 105 10 88.0 15 3100 3 2a -55 Z/Z20 0.6 to 2.0 105 Z/Z20 0.6 to 2.0 C/C Within20% of the initial value DF < 1.5 times of the initial limit LC Within the initial limit C/C Within50%, -20% of the initial value2R5TPE470M (,F,C,9,7), 2R5TPE330M (,F,C,9,7), 2R5TPE220M (,F,C,9,7), 2R5TPE1000M (,F), 2R5TPE1500M (F,C) < 1.5 times of the initial limit < 3 times of the initial limit C/C Within5% of the initial value DF Within the initial limit LC < RV 3 times of the initial limit F 68 100 150 220 330 470 680 1,000 1,500 S 0.2 1.1 1.3 1.3 1.3 RV : Rated voltage 4.0 6.3 10.0 D2E D2E D2E D2E D3L D4 D4 D2E D2E D2E D3L D2E D2E D2E D2E,D3L,D4 D4,D15E D4 105 150 4.0 105 10 60.0 18 2800 3 2a 2.5 105 470 2.5 105 10 117.5 18 2800 3 2a 2R5TPE470MF 2.5 105 470 2.5 105 10 117.5 15 3100 3 2a 2R5TPE470MC 2.5 105 470 2.5 105 10 117.5 12 3500 3 2a 2R5TPE470M9 2.5 105 470 2.5 105 10 117.5 9 3900 3 2a 2R5TPE470M7 2.5 105 470 2.5 105 10 117.5 7 4400 3 2a 2R5TPE330M 2.5 105 330 2.5 105 10 82.5 25 2400 3 2a 2R5TPE330MI 2.5 105 330 2.5 105 10 82.5 18 2800 3 2a 2R5TPE330MF 2.5 105 330 2.5 105 10 82.5 15 3100 3 2a 2R5TPE330MC 2.5 105 330 2.5 105 10 82.5 12 3500 3 2a 2R5TPE330M9 2.5 105 330 2.5 105 10 82.5 9 3900 3 2a 2R5TPE330M7 2.5 105 330 2.5 105 10 82.5 7 4400 3 2a 2R5TPE220M 2.5 105 220 2.5 105 10 55.0 25 2400 3 2a 2R5TPE220MI 2.5 105 220 2.5 105 10 55.0 18 2800 3 2a 2R5TPE220MF 2.5 105 220 2.5 105 10 55.0 15 3100 3 2a 2R5TPE220M9 2.5 105 220 2.5 105 10 55.0 9 3900 3 2a D3L D4 10TPE220ML 10 105 220 10 105 10 220.0 25 2400 2a 10TPE220MIL 10 105 220 10 105 10 220.0 18 2800 2a Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Series system diagram Image of case size Products list Explanation of part numbers Packing specifications 6TPE330MAL 6.3 85 330 5.0 105 10 207.9 25 2400 3 2a 6TPE330MA9EL 6.3 85 330 5.0 105 10 207.9 3900 3 2a 6TPE330ML 6.3 105 330 6.3 105 10 207.9 9/500k 25 2400 3 2a 6TPE330MIL 6.3 105 330 6.3 105 10 207.9 18 2800 3 2a 6TPE330MFL 6.3 105 330 6.3 105 10 207.9 15 3100 3 2a 4TPE470MAL 4.0 105 470 4.0 105 10 188.0 10 4400 3 2a 4TPE470ML 4.0 105 470 4.0 105 10 188.0 25 2400 3 2a (unit: mm) 4TPE470MIL 4.0 105 470 4.0 105 10 188.0 18 2800 3 2a W1 0.1 2.4 2.4 2.4 2.4 4TPE470MFL 4.0 105 470 4.0 105 10 188.0 15 3100 3 2a TPU 4TPE470MCL 4.0 105 470 4.0 105 10 188.0 12 3500 3 2a TPH 2R5TPE680MFL 2.5 105 680 2.5 105 10 170.0 15 3100 3 2a 2R5TPE680MCL 2.5 105 680 2.5 105 10 170.0 12 3500 3 2a W1 H 0.21 1.4 1.8 2.8 3.8 2.5 4.0 2R5TPE470MI D2E 4TPE150MI Within40%, -20% of the initial value (Except for the above model) Size list W 0.2 4.3 4.3 4.3 4.3 68 85 105 L L 0.3 7.3 7.3 7.3 7.3 105 6.3 10 105 Dimensions Size code D15E D2E D3L D4 2a 6.3 Reliability TPU 250 6.3 105, 1,000 cycles, 1k discharge resistance, surge voltage applied Rated temp. 85 products85 S 100 LC S 3 150 H Technical data Recommended soldering condition 260 105 Marking Recommended land pattern dimension 105 W Products list 1700 6.3 DF Selection guide Image of case size 35 6.3 Guidelines and precautions for use Series system diagram 296.1 6TPE100M 60, 90 to 95%RH, 500h, No-applied voltage Surge 10 6TPE150MF Catalog Deletion and EOL series POSCAP Line-up 105 Please see the attached characteristics list 100kHz/20 Damp heat (Steady State) 5.0 Please see the attached characteristics list 105, 2,000h, rated voltage applied Rated temp, 85 products: 85, 1,000h, rated voltage applied 6TPE330MAP,6TPE470MAZU85,2,000h Endurance SVP 470 120Hz/20 Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 85 Rated voltage applied, after 5 minutes Dissipation Factor (DF) Leakage current 6.3 6TPE330MAP 10TPE68M Specifications Rated voltage Capacitance tolerance SVPF D15E 6TPE470MAZU Selection guide Specifications Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < Technical data Recommended soldering condition Size code Series system diagram Surface mount type Packing specifications Radial lead type TPE series characteristics list Guidelines and precautions for use Radial lead type Packing specifications SMD type TPE series has low ESR and can aid in creating thinner and smaller products. TPE Series Selection guide Products list Surface mount type OS-CON Line-up D3L Marking Technical data Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPESeries RoHS compliance Low ESR Update Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Surface mount type Surface mount type OS-CON Line-up TPG TPSF 105 330 105 10 330.0 25 3000 2a 6TPE680M 6.3 105 680 6.3 105 15 428.4 25 3000 3 2a 6TPE680MI 6.3 105 680 6.3 105 15 428.4 18 3500 3 2a 6TPE470M 6.3 105 470 6.3 105 15 296.1 25 3000 3 2a 6.3 105 470 6.3 105 15 296.1 18 3500 3 2a TV D4 6TPE470MI 6TPE330MAA 6.3 85 330 5.0 105 10 207.9 10 4400 3 2a TV TH 2R5TPE1000MF 2.5 105 1000 2.5 105 15 250.0 15 3900 3 2a TH TQC 2R5TPE1500MF 2.5 105 1500 2.5 105 15 375.0 15 3900 2a 2R5TPE1500MC 2.5 105 1500 2.5 105 15 375.0 12 4400 2a TPE TPE TPB/TPC TPLTPLF TPF TA Catalog Deletion and EOL models 94 1 0.1D2E,D15E 10TPE330M 10 10 Red lettersNew models TPE TPE TPB/TPC TPLTPLF TPF TA TQC Catalog Deletion and EOL models 95 Fundamental structure Characteristics Reliability Items Condition (V) - 2.5 4.0 6.3 10 Surge voltage (V) - 2.9 4.6 7.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Surface mount type SVPE Rated capacitance range (F) 120Hz/20 68 to 1,500 SVPS SVPD SVPC SVPB SVPA SVQP Radial lead type SEPF SEPC SEQP SEP Explanation of part numbers Packing specifications Fundamental structure haracteristics TPH TPSF Surface mount type TPG 105 10 68.0 25 2400 3 2a 330 5.0 105 10 207.9 25 2400 3 2a 6TPE220MAP 6.3 85 220 5.0 105 10 138.6 25 2400 3 2a 6TPE220M 6.3 105 220 6.3 105 10 138.6 25 2400 3 2a 6TPE220MI 6.3 105 220 6.3 105 10 138.6 18 2800 3 2a 6TPE150M 6.3 105 150 6.3 105 10 94.5 25 2400 3 2a 6TPE150MI 6.3 105 150 6.3 105 10 94.5 18 2800 3 2a 10 10 94.5 15 3100 3 2a 10 63.0 25 2400 3 2a 100kHz/20 Please see the attached characteristics list 6TPE100MI 6.3 105 100 6.3 105 10 63.0 18 2800 3 2a 4TPE330M 4.0 105 330 4.0 105 10 132.0 25 2400 3 2a 4TPE330MI 4.0 105 330 4.0 105 10 132.0 18 2800 3 2a 4TPE220M 4.0 105 220 4.0 105 10 88.0 25 2400 3 2a 4TPE220MI 4.0 105 220 4.0 105 10 88.0 18 2800 3 2a 4TPE220MF 4.0 105 220 4.0 105 10 88.0 15 3100 3 2a -55 Z/Z20 0.6 to 2.0 105 Z/Z20 0.6 to 2.0 C/C Within20% of the initial value DF < 1.5 times of the initial limit LC Within the initial limit C/C Within50%, -20% of the initial value2R5TPE470M (,F,C,9,7), 2R5TPE330M (,F,C,9,7), 2R5TPE220M (,F,C,9,7), 2R5TPE1000M (,F), 2R5TPE1500M (F,C) < 1.5 times of the initial limit < 3 times of the initial limit C/C Within5% of the initial value DF Within the initial limit LC < RV 3 times of the initial limit F 68 100 150 220 330 470 680 1,000 1,500 S 0.2 1.1 1.3 1.3 1.3 RV : Rated voltage 4.0 6.3 10.0 D2E D2E D2E D2E D3L D4 D4 D2E D2E D2E D3L D2E D2E D2E D2E,D3L,D4 D4,D15E D4 105 150 4.0 105 10 60.0 18 2800 3 2a 2.5 105 470 2.5 105 10 117.5 18 2800 3 2a 2R5TPE470MF 2.5 105 470 2.5 105 10 117.5 15 3100 3 2a 2R5TPE470MC 2.5 105 470 2.5 105 10 117.5 12 3500 3 2a 2R5TPE470M9 2.5 105 470 2.5 105 10 117.5 9 3900 3 2a 2R5TPE470M7 2.5 105 470 2.5 105 10 117.5 7 4400 3 2a 2R5TPE330M 2.5 105 330 2.5 105 10 82.5 25 2400 3 2a 2R5TPE330MI 2.5 105 330 2.5 105 10 82.5 18 2800 3 2a 2R5TPE330MF 2.5 105 330 2.5 105 10 82.5 15 3100 3 2a 2R5TPE330MC 2.5 105 330 2.5 105 10 82.5 12 3500 3 2a 2R5TPE330M9 2.5 105 330 2.5 105 10 82.5 9 3900 3 2a 2R5TPE330M7 2.5 105 330 2.5 105 10 82.5 7 4400 3 2a 2R5TPE220M 2.5 105 220 2.5 105 10 55.0 25 2400 3 2a 2R5TPE220MI 2.5 105 220 2.5 105 10 55.0 18 2800 3 2a 2R5TPE220MF 2.5 105 220 2.5 105 10 55.0 15 3100 3 2a 2R5TPE220M9 2.5 105 220 2.5 105 10 55.0 9 3900 3 2a D3L D4 10TPE220ML 10 105 220 10 105 10 220.0 25 2400 2a 10TPE220MIL 10 105 220 10 105 10 220.0 18 2800 2a Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SVPF SVPE SVPS SVPD SVPC SVPB SVPA SVQP SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Series system diagram Image of case size Products list Explanation of part numbers Packing specifications 6TPE330MAL 6.3 85 330 5.0 105 10 207.9 25 2400 3 2a 6TPE330MA9EL 6.3 85 330 5.0 105 10 207.9 3900 3 2a 6TPE330ML 6.3 105 330 6.3 105 10 207.9 9/500k 25 2400 3 2a 6TPE330MIL 6.3 105 330 6.3 105 10 207.9 18 2800 3 2a 6TPE330MFL 6.3 105 330 6.3 105 10 207.9 15 3100 3 2a 4TPE470MAL 4.0 105 470 4.0 105 10 188.0 10 4400 3 2a 4TPE470ML 4.0 105 470 4.0 105 10 188.0 25 2400 3 2a (unit: mm) 4TPE470MIL 4.0 105 470 4.0 105 10 188.0 18 2800 3 2a W1 0.1 2.4 2.4 2.4 2.4 4TPE470MFL 4.0 105 470 4.0 105 10 188.0 15 3100 3 2a TPU 4TPE470MCL 4.0 105 470 4.0 105 10 188.0 12 3500 3 2a TPH 2R5TPE680MFL 2.5 105 680 2.5 105 10 170.0 15 3100 3 2a 2R5TPE680MCL 2.5 105 680 2.5 105 10 170.0 12 3500 3 2a W1 H 0.21 1.4 1.8 2.8 3.8 2.5 4.0 2R5TPE470MI D2E 4TPE150MI Within40%, -20% of the initial value (Except for the above model) Size list W 0.2 4.3 4.3 4.3 4.3 68 85 105 L L 0.3 7.3 7.3 7.3 7.3 105 6.3 10 105 Dimensions Size code D15E D2E D3L D4 2a 6.3 Reliability TPU 250 6.3 105, 1,000 cycles, 1k discharge resistance, surge voltage applied Rated temp. 85 products85 S 100 LC S 3 150 H Technical data Recommended soldering condition 260 105 Marking Recommended land pattern dimension 105 W Products list 1700 6.3 DF Selection guide Image of case size 35 6.3 Guidelines and precautions for use Series system diagram 296.1 6TPE100M 60, 90 to 95%RH, 500h, No-applied voltage Surge 10 6TPE150MF Catalog Deletion and EOL series POSCAP Line-up 105 Please see the attached characteristics list 100kHz/20 Damp heat (Steady State) 5.0 Please see the attached characteristics list 105, 2,000h, rated voltage applied Rated temp, 85 products: 85, 1,000h, rated voltage applied 6TPE330MAP,6TPE470MAZU85,2,000h Endurance SVP 470 120Hz/20 Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 85 Rated voltage applied, after 5 minutes Dissipation Factor (DF) Leakage current 6.3 6TPE330MAP 10TPE68M Specifications Rated voltage Capacitance tolerance SVPF D15E 6TPE470MAZU Selection guide Specifications Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms temp. max temp. () F V max/5min. 100kHz/20 100kHz1 < (V) < Technical data Recommended soldering condition Size code Series system diagram Surface mount type Packing specifications Radial lead type TPE series characteristics list Guidelines and precautions for use Radial lead type Packing specifications SMD type TPE series has low ESR and can aid in creating thinner and smaller products. TPE Series Selection guide Products list Surface mount type OS-CON Line-up D3L Marking Technical data Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use TPESeries RoHS compliance Low ESR Update Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability Surface mount type Surface mount type OS-CON Line-up TPG TPSF 105 330 105 10 330.0 25 3000 2a 6TPE680M 6.3 105 680 6.3 105 15 428.4 25 3000 3 2a 6TPE680MI 6.3 105 680 6.3 105 15 428.4 18 3500 3 2a 6TPE470M 6.3 105 470 6.3 105 15 296.1 25 3000 3 2a 6.3 105 470 6.3 105 15 296.1 18 3500 3 2a TV D4 6TPE470MI 6TPE330MAA 6.3 85 330 5.0 105 10 207.9 10 4400 3 2a TV TH 2R5TPE1000MF 2.5 105 1000 2.5 105 15 250.0 15 3900 3 2a TH TQC 2R5TPE1500MF 2.5 105 1500 2.5 105 15 375.0 15 3900 2a 2R5TPE1500MC 2.5 105 1500 2.5 105 15 375.0 12 4400 2a TPE TPE TPB/TPC TPLTPLF TPF TA Catalog Deletion and EOL models 94 1 0.1D2E,D15E 10TPE330M 10 10 Red lettersNew models TPE TPE TPB/TPC TPLTPLF TPF TA TQC Catalog Deletion and EOL models 95