ALUMINUM ELECTROLYTIC CAPACITORS KW Standard, For Audio Equipment series Realization of a harmonious balance of sound quality, made possible by the development of new electrolyte. Most suited for AV equipment like DVD, MD. Compliant to the RoHS directive (2002/95/EC). KW High Sound Quality FW Specifications Item Performance Characteristics - 40 to +85C 6.3 to 100V 0.1 to 33000F 20% at 120Hz, 20C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance After 1 minute's application of rated voltage, leakage current is not more than 0.03 CV or 4 (A) , whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A) , whichever is greater. Leakage Current Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 Measurement frequency : 120Hz, 100 0.08 Temperature : 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 10 4 10 16 3 8 25 2 5 35 2 4 Capacitance change tan Leakage current 50 2 3 63 2 3 100 2 3 Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Shelf Life After sroring the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with gold color letter on black sleeve. Type numbering system (Example : 10V 1000F) Radial Lead Type d 1 P 0.5 Sleeve (P.E.T.) MAX. D+ D 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 d 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 Pressure relief vent ( 6.3up) L+ 15MIN MAX. 5 6 7 8 9 10 11 18 7.5 0.8 0.5 20 10 1.0 0.5 Configuration Capacitance tolerance (20%) (mm) 22 25 10 12.5 1.0 1.0 1.0 1.0 Rated capacitance (1000F) Rated voltage (10V) Series name Type D Pb-free leadwire Pb-free PET sleeve 5 6.3 8 *10 12.5 to 18 20 to 25 DD ED PD HD RD 4MIN 6.3 0J V 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 333 6.3 x 11 6.3 x 11 8 x 11.5 10 x 20 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 40 22 x 50 10 1A 265 310 530 980 1170 1350 1600 2000 2550 3200 3900 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35.5 18 x 35.5 20 x 40 22 x 50 16 1C 5 x 11 145 230 6.3 x 11 8 x 11.5 270 8 x 11.5 330 10 x 16 630 1050 12.5 x 20 1420 12.5 x 25 16 x 25 1800 16 x 35.5 2150 18 x 35.5 2500 20 x 40 2720 22 x 50 3700 25 x 50 4500 25 1E 155 250 360 420 770 1250 1700 2100 2500 2640 3400 4200 4800 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 18 x 35.5 20 x 40 22 x 50 25 x 50 Frequency coefficient of rated ripple current Cap.(F) 4 * Please refer to page 20 about the end seal configulation. Code 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 33000 3 (D < 20) 1.5 (D 20) 2.0 Dimensions Cap. (F) 16 7.5 0.8 0.5 2 U KW 1 A 1 0 2 M PD Frequency 0.1 to 47 100 to 470 1000 to 33000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 35 1V 115 185 320 420 530 950 1550 1950 2360 2590 3000 3800 4500 5 x 11 5 x 11 6.3 x 11 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 35.5 18 x 35.5 20 x 40 22 x 50 25 x 50 105 120 200 370 470 630 1100 1800 2220 2490 3000 3700 4300 50 1H 63 1J 100 2A 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 35.5 18 x 35.5 20 x 40 22 x 50 25 x 50 1.1 2.4 3.5 5.0 10 23 35 40 5 x 11 65 5 x 11 95 120 6.3 x 11 150 6.3 x 11 10 x 12.5 250 10 x 16 410 10 x 20 570 760 12.5 x 20 16 x 25 1300 18 x 35.5 2090 20 x 40 2360 22 x 50 2900 25 x 50 3500 4000 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 25 16 x 25 18 x 40 22 x 50 25 x 50 70 100 140 165 300 470 650 880 1300 2200 2700 3400 3500 2.1 4.7 7.0 10 21 30 40 45 75 120 160 210 350 600 750 1000 1370 2400 2900 Case size D x L (mm) Rated ripple Rated ripple current (mArms) at 85C 120Hz 10kHz or more 2.00 1.50 1.15 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z