CD 295 BC Series 6 000h at 85C CD 296 KC * Long Life at 85C * High Ripple Current * Long Life General Industrial Electronics 105C CD 293 BZ longer life CD 295 BC larger size higher current higher current CD 29D HR CD 29L QL Item Characteristics -40 ~ +85 Voltage Range (V) 10 ~ 400 -25 ~ +85 450 Capacitance Range (F) 68 ~ 22000 Capacitance Tolerance (20C, 120Hz) 20% Leakage Current (A) After 5 minutes at 20C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (F) V: Rated Voltage (V) Rated Voltage (V) Dissipation Factor (20C, 120Hz) Tan (max) 10 16 25 35 50 0,80 0,60 0,50 0,40 0,30 Rated Voltage (V) Stability at Low Temperature (Impedance Ratio at 120Hz) 10 0,20 16~35 50~100 160~200 250~400 Z -25C / Z +20C 5 4 Z -40C / Z +20C 18 15 6 8 Load Life >100 000h 0,15 0,15 450 4 3 10 Useful Life 6 000h Lifetime 63~100 160~250 315~450 - Endurance Test 5 000h Snap-In Operating Temperature Range (C) Shelf Life 5 000h 1000h Leakage Current Not more than specified value Not more than specified Not more than specified value value Not more than specified value Capacity Change Within 30% of initial value Within 20% of initial value Within 20% of initial value Within 20% of initial value Not more than 300% of specified value Not more than 200% of specified value Not more than 130% of specified value Not more than 200% of specified value UR UR UR UR UR = 0 IR 1,2 x IR IR IR = 0 IR = 0 85C 40C 85C 85C 85C 1% Failure Rate 1% Failure Rate guaranteed Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Lifetime Diagram UR < 160V Frequency Coefficient Frequency 50Hz Rated Voltage (V) 120Hz 1kHz Lifetime Diagram UR 160V 2.5 10kHz 100kHz 2.5 CD 295 BC Series IA --- 2.0 IR IR 1.5 50 0,95 1,00 1,10 1,15 1,15 63 ~ 100 0,95 1,00 1,16 1,30 1,33 0,90 1,00 1,20 1,50 1.5 1.0 0.5 160 CD 295 BC Series IA --- 2.0 1.0 X32 X16 X8 X4 X2 X1 X32 0.5 Lifetime Multiplier 1,55 0.0 20 30 X16 X8 X4 X2 X1 Lifetime Multiplier 40 50 60 70 IA = actual ripple current at 120Hz, 80 90 TA (C) 0.0 20 30 40 50 60 70 IA = actual ripple current at 120Hz, 80 90 TA (C) IR = rated ripple current at 120Hz, 85C IR = rated ripple current at 120Hz, 85C Multiplier of Useful Life as a function of ambient temperature and ripple current load Multiplier of Useful Life as a function of ambient temperature and ripple current load Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 49 CD 295 BC Series VDC (Surge Voltage) Code (V) Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (F) (m) (m) (Arms) 10000 12000 10 (13) 1A 15000 18000 22000 8200 10000 12000 16 (20) 1C 15000 18000 22000 5600 6800 8200 Snap-In 10000 25 (32) 1E 12000 15000 18000 22000 3300 3900 4700 5600 6800 35 (44) 1V 8200 10000 12000 15000 18000 22000 2200 2700 3300 3900 4700 50 (63) 1H 5600 6800 8200 10000 12000 15000 50 107 89 71 71 59 59 49 49 49 98 80 80 67 54 54 54 45 45 37 37 37 37 119 98 98 81 67 67 67 56 56 56 45 45 37 37 37 31 31 161 137 113 95 95 79 79 79 65 65 65 65 54 54 45 45 45 36 36 30 30 25 181 148 148 121 103 103 103 85 85 72 72 72 72 59 59 49 49 49 40 40 34 34 27 75 62 50 50 42 42 34 34 34 68 56 56 47 38 38 38 31 31 26 26 26 26 83 69 69 57 47 47 47 39 39 39 31 31 26 26 26 22 22 113 96 80 67 67 55 55 55 46 46 46 46 38 38 31 31 31 25 25 21 21 17 127 104 104 85 72 72 72 60 60 50 50 50 50 41 41 34 34 34 28 28 24 24 19 2,5 2,7 3,2 3,1 3,6 3,6 4,0 4,1 4,1 2,2 2,6 2,6 2,9 3,3 3,3 3,4 3,8 3,7 4,2 4,2 4,2 4,4 2,0 2,3 2,3 2,6 2,9 2,8 3,0 3,3 3,2 3,4 3,7 3,9 4,3 4,2 4,4 4,8 5,0 1,8 2,1 2,2 2,3 2,3 2,9 2,6 2,7 2,8 2,8 2,8 2,9 3,1 3,2 3,5 3,5 3,6 4,1 4,1 4,6 4,7 5,3 1,7 1,9 1,9 2,0 2,1 2,1 2,4 2,4 2,4 2,5 2,5 2,5 2,6 2,8 2,8 3,2 3,0 3,0 3,4 3,4 3,8 3,8 4,5 Size O DxL VDC (Surge Voltage) Code Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (mm) (V) (F) (m) (m) (Arms) 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 30 25 x 40 35 x 25 25 x 50 30 x 35 35 x 30 30 x 40 35 x 35 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 25 x 25 25 x 30 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 1500 1800 2200 2700 3300 63 (79) 1J 3900 4700 5600 6800 8200 10000 12000 1000 1200 1500 1800 2200 80 (100) 1K 2700 3300 3900 4700 5600 6800 680 820 1000 1200 1500 100 (125) 2A 1800 2200 2700 3300 3900 4700 220 270 330 390 470 160 (200) 2C 560 680 820 1000 177 148 121 121 99 99 81 81 81 68 68 68 68 57 48 48 48 40 40 33 33 27 23 266 222 177 148 148 121 121 121 99 99 99 99 81 81 68 68 68 57 57 48 48 39 391 324 266 222 222 177 177 177 148 148 148 148 121 121 121 99 99 81 81 68 68 57 905 737 603 511 511 424 356 356 356 293 293 243 243 243 243 199 199 199 124 104 85 85 69 69 57 57 57 48 48 48 48 40 34 34 34 28 28 23 23 19 16 186 155 124 104 104 85 85 85 69 69 69 69 57 57 48 48 48 40 40 34 34 28 274 227 186 155 155 124 124 124 104 104 104 104 85 85 85 69 69 57 57 48 48 40 634 516 423 358 358 297 249 249 249 205 205 170 170 170 170 140 140 140 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com 1,6 1,8 2,0 2,0 2,2 2,3 2,3 2,3 2,3 2,5 2,6 2,6 2,7 2,9 3,1 3,2 3,3 3,6 3,7 3,7 3,8 4,3 4,8 1,3 1,5 1,7 1,9 1,9 2,1 2,2 2,2 2,5 2,5 2,5 2,5 2,8 2,8 3,1 3,2 3,2 3,6 3,6 3,8 3,8 4,1 1,1 1,2 1,4 1,6 1,6 1,8 1,7 1,8 2,1 2,0 2,1 2,2 2,2 2,3 2,5 2,6 2,7 3,0 3,1 3,4 3,4 4,0 1,0 1,1 1,3 1,5 1,5 1,7 1,9 1,9 2,0 2,1 2,2 2,5 2,4 2,5 2,4 2,7 2,8 2,7 v2006.2 Size O DxL (mm) 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 45 25 x 40 30 x 30 35 x 25 30 x 30 25 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 25 22 x 25 22 x 30 25 x 25 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 CD 295 BC Series Ratings for CD 295 BC Series Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (V) (F) (m) (m) (Arms) 166 166 166 133 133 111 91 737 603 511 424 424 424 356 356 293 293 293 293 243 243 243 199 199 166 166 133 111 905 737 603 603 511 511 424 424 356 356 356 356 293 293 243 243 243 199 199 166 166 133 1990 1106 905 905 737 603 603 603 511 511 424 424 424 424 356 356 293 293 243 243 199 166 1990 1658 1327 1327 1106 1106 905 905 905 737 737 737 737 117 117 117 93 93 78 64 516 423 358 297 297 297 249 249 205 205 205 205 170 170 170 140 140 117 117 93 78 634 516 423 423 358 358 297 297 249 249 249 249 205 205 170 170 170 140 140 117 117 93 1393 774 634 634 516 423 423 423 358 358 297 297 297 297 249 249 205 205 170 170 140 117 1393 1161 929 929 774 774 634 634 634 516 516 516 516 1200 160 (200) 2C 1500 1800 2200 270 330 390 470 560 180 (225) 2K 680 820 1000 1200 1500 1800 220 270 330 390 470 200 (250) 2D 560 680 820 1000 1200 1500 100 180 220 270 330 390 250 (300) 2E 470 560 680 820 1000 1200 100 120 150 315 (365) 2F 180 220 270 3,1 3,2 3,0 3,7 3,5 3,9 4,5 1,2 1,4 1,5 1,7 1,7 1,8 1,9 2,0 2,3 2,2 2,3 2,2 2,5 2,6 2,5 2,9 2,9 3,3 3,1 3,6 4,1 1,1 1,2 1,4 1,4 1,6 1,6 1,8 1,9 2,0 2,0 2,1 2,0 2,3 2,4 2,6 2,7 2,5 3,1 2,8 3,4 3,2 3,8 0,72 0,94 1,1 1,1 1,2 1,4 1,4 1,5 1,6 1,6 1,8 1,8 1,8 1,9 2,0 2,0 2,3 2,4 2,6 2,6 3,0 3,4 0,67 0,75 0,85 0,85 0,96 0,96 1,1 1,1 1,1 1,2 1,3 1,3 1,3 Size O DxL VDC (Surge Voltage) Code Rated Capacitance Max ESR 20C, 120Hz Typ ESR 20C, 120Hz Max Ripple Current 85C, 120Hz (mm) (V) (F) (m) (m) (Arms) 603 603 511 511 511 424 424 356 356 293 2427 1990 1658 1658 1327 1327 1106 1106 905 905 905 905 737 737 603 603 511 511 424 424 356 293 243 2926 2427 1990 1990 1658 1327 1327 1327 1106 1106 1106 1106 905 905 905 737 737 737 603 603 511 511 424 356 2926 2427 1990 1990 1658 1658 1327 1327 1327 1106 1106 1106 905 905 905 737 737 603 511 424 423 423 358 358 358 297 297 249 249 205 1699 1393 1161 1161 929 929 774 774 634 634 634 634 516 516 423 423 358 358 297 297 249 205 170 2048 1699 1393 1393 1161 929 929 929 774 774 774 774 634 634 634 516 516 516 423 423 358 358 297 249 2048 1699 1393 1393 1161 1161 929 929 929 774 774 774 634 634 634 516 516 423 358 297 25 x 50 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 35 x 35 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 30 x 25 22 x 45 25 x 35 30 x 30 35 x 25 25 x 40 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 35 x 45 22 x 25 22 x 30 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 35 30 x 25 22 x 45 25 x 40 30 x 30 35 x 25 330 315 (365) 2F 390 470 560 680 82 100 120 150 180 350 (400) 2V 220 270 330 390 470 560 680 820 68 82 100 120 150 180 400 (450) 2G 220 270 330 390 470 560 68 82 100 120 150 450 (500) 2W 180 220 270 330 390 470 1,4 1,4 1,6 1,6 1,6 1,8 1,8 2,0 2,0 2,3 0,64 0,72 0,82 0,81 0,94 0,94 1,1 1,1 1,2 1,2 1,2 1,3 1,4 1,4 1,6 1,6 1,7 1,8 2,0 2,0 2,3 2,6 2,8 0,55 0,60 0,70 0,70 0,79 0,90 0,89 0,95 1,0 1,0 1,1 1,2 1,1 1,2 1,2 1,3 1,4 1,6 1,6 1,7 1,8 1,8 2,1 2,3 0,57 0,64 0,72 0,73 0,80 0,83 0,95 0,95 0,98 1,1 1,1 1,2 1,2 1,3 1,3 1,4 1,5 1,7 1,9 2,2 Size O DxL (mm) 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 30 x 25 22 x 45 25 x 35 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 35 x 60 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 30 35 x 25 22 x 50 25 x 40 30 x 35 25 x 45 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 30 22 x 35 22 x 35 25 x 30 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 25 x 45 30 x 35 35 x 25 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 45 35 x 50 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 51 Snap-In VDC (Surge Voltage) Code Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in F) Capacitance Tolerance 0,47 = R47 20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 10% =K +50 / -10% = T Taped = FF Terminal = T2 5x11,5 = 0511 6,3x11,5= 0611 CD 262 = QM 10000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90 - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions O DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w 0,3 A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 Polymer 25 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 Part Number System Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 Pin Type: Soldering Order Code: S4 T6, T4 S4 Terminal T6 T4 Pin Length T 6,3 4,0 Snap-In Terminal Order Code: P2, P3, P4 Soldering Terminal Order Code: P5 P2 P3 P4 P5 Positive Negative Terminal Negative Negative Mounting Holes Mounting Holes Mounting Holes P3 only T4 Terminal Order Code Screw Type EC G Technology Terminal Type 1C BP Rated Voltage Series Code Code 101 M Capacitance Code Capacitance Tolerance CD 135 = BP 100 = 101 EC = Electrolytic Screw = G For coding Capacitor please refer CD 136 = PK 1000 = 102 to the pages CD 137 = PX 10000 = 103 of ratings CD 138 = PC CD 139 = BL B E Mounting 160 A361 JExxxxx For Terminal Code see tables below for Specials only Diameter Length 20% = M Bolt =B 36 = A 53 = 053 10% = K No double sleeve =N 40 = B 65 = 065 +30 / -10%= Q 2 stoppers bracket+double sleeve* = I 51 = C 96 = 096 +20 / -0% = R 3 stoppers bracket+double sleeve* = Y 64 = D 100 = 100 +50 / -10%= T No bracket, but double sleeve* 77 = E 115 = 115 preferred =D * Double sleeve for diameter 51 only 90 = F 236 = 236 101 = G Technical Specification Screw Type Dimensions Standard Housing Order Code: I, Y, D, N Bolt Housing Order Code: B OD Od l O 36 M8 12 O 51 M12 16 in mm 10 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2