MNDM54LS02-X REV 1A0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETER
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: VCC 4.5V to 5.5V, Temp range: -55C to 125C
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
IIH Input High
Current VCC=5.5V, VM=2.7V, VINH=4.5V,
VINL=0.0V 1, 3 INPUTS 20.0 uA 1, 2,
3
IBVI Input High
Current VCC=5.5V, VM=10.0V, VINH=4.5V,
VINL=0.0V 1, 3 INPUTS 100 uA 1, 2,
3
IIL Input LOW Current VCC=5.5V, VM=0.4V, VINH=4.5V 1, 3 INPUTS -0.03 -0.4 mA 1, 2,
3
VOL Output LOW
Voltage VCC=4.5V, VIH=2.0V, IOL=4.0mA,
VINH=4.5V, VINL=0.0V 1, 3 OUTPUTS 0.4 V 1, 2,
3
VOH Output HIGH
Voltage VCC=4.5V, VIL=0.7V, IOH=-0.4mA,
VINH=4.5V 1, 3 OUTPUTS 2.5 V 1, 2,
3
IOS Short-Circuit
Current VCC=5.5V, VINL=0.0V, VOUT=0.0V,
VINH=4.5V 1, 3 OUTPUTS -20 -100 mA 1, 2,
3
VCD Input Clamp Diode
Voltage VCC=4.5V, IM=-18mA, VINH=4.5V 1, 3 INPUTS -1.5 V 1, 2,
3
ICCH Supply Current VCC=5.5V, VINL=0.0V 1, 3 VCC 3.2 mA 1, 2,
3
ICCL Supply Current VCC=5.5V, VINH=4.5V 1, 3 VCC 5.4 mA 1, 2,
3
AC PARAMETER - 15pF
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=15pF, RL=2k ohms Temp range: +25C
tpLH Propagation Delay VCC=5.0V 5 In to
On 10.0 ns 9
tpHL Propagation Delay VCC=5.0V 5 In to
On 10.0 ns 9
AC PARAMETER - 50pF
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pF, RL=2k ohms Temp range: -55C to +125C
tpLH Propagation Delay VCC=5.0V 2, 4 In to
On 2.0 22.0 ns 9
2, 4 In to
On 2.0 30.0 ns 10, 11
tpHL Propagation Delay VCC=5.0V 2, 4 In to
On 2.0 16.0 ns 9
2, 4 In to
On 2.0 26.0 ns 10, 11
Note 1: Screen tested 100% on each device at -55C, +25C & +125C temperature, subgroups A1, 2,
3, 7 & 8.
Note 2: Screen tested 100% on each device at +25C temperature only, subgroup A9.
4