End of Life March-2018 IL766B www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, AC Input, Internal RBE FEATURES A/C 1 6 NC C/A 2 5 C NC 3 4 E * * * * * * * * i179040-1 DESCRIPTION Internal RBE for better stability BVCEO 60 V Isolation rated voltage 4420 VRMS AC or polarity insensitive inputs No base connection High insulation resistance, 1011 typical Standard plastic DIP package Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS The IL766B is a bidirectional input, optically coupled isolator consisting of two gallium arsenide infrared emitters and a silicon photodarlington sensor. * UL1577, file no. E52744, double protection * cUL tested to CSA 22.2 bulletin 5A * BSI EN 60950, BSI EN 60065 ORDERING INFORMATION I L 7 6 PART NUMBER 6 B - # X CTR BIN 0 0 PACKAGE OPTION AGENCY CERTIFIED/PACKAGE DIP-6, 400 mil 7.62 mm 10.16 mm CTR (%) VDE, UL, BSI, CSA DIP-6 DIP-6 # > 400 > 900 IL766B-1 IL766B-2 - IL766B-2X006 DIP-6, 400 mil, option 6 Note * For additional information on the available options refer to option information ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward continuous current Power dissipation IF 60 mA Pdiss 200 mW 2.6 mW/C V Derate linearly from 55 C OUTPUT Collector emitter breakdown voltage BVCEO 60 Collector base breakdown voltage BVCBO 70 V Pdiss 200 mW 2.6 mW/C Power dissipation Derate linearly from 25 C COUPLER Total power dissipation t = 1.0 s Ptot Derate linearly from 25 C 250 mW 3.3 mW/C Storage temperature Tstg -55 to +150 C Operating temperature Tamb -55 to +100 C 10 s Lead soldering time at 260 C Note * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability Rev. 1.6, 23-Jul-15 Document Number: 83644 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life March-2018 IL766B www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VF - 1.25 1.5 V Collector emitter breakdown voltage IC = 10 mA, IF = 0 A BVCEO 60 - - V Collector emitter leakage current VCE = 10 V, IF = 0 A ICEO - 1.0 100 nA IC = 10 mA, IF = 10 mA VCEsat - - 1.0 V INPUT Forward voltage OUTPUT COUPLER Collector emitter, saturation voltage Note * Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements CURRENT TRANSFER RATIO PARAMETER Saturation voltage, collector emitter TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = 1.0 mA, VCE = 5.0 V IL766B-1 CTR 400 - - % IF = 0.5 mA, VCE = 5.0 V IL766B-2 CTR 900 - - % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Turn-off time VCC = 5.0 V, IF = 2.0 mA, RL = 100 toff - 200 - s SAFETY AND INSULATION RATINGS PARAMETER Climatic classification TEST CONDITION SYMBOL According to IEC 68 part 1 Comparative tracking index VALUE UNIT 55 / 100 / 21 CTI 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 C 7 mm Maximum rated withstanding isolation voltage Isolation resistance Output safety power t = 1 min Creepage distance Clearance distance Insulation thickness DTI 7 mm 0.4 mm Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits Rev. 1.6, 23-Jul-15 Document Number: 83644 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life March-2018 IL766B www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 6.4 0.1 ISO method A 8.6 0.1 1 min. 7.62 typ. 1.2 0.1 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 3 to 9 0.5 0.05 0.25 typ. 7.62 to 8.81 i178004 2.54 typ. Option 6 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.255 (6.5) 0.248 (6.3) 20 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) Rev. 1.6, 23-Jul-15 18446 Document Number: 83644 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000