SD700C..L SERIES
STANDARD RECOVERY DIODES Hockey Puk Version
700A
Bulletin I2096 rev. B 04/00
1
www.irf.com
Features
Wide current range
High voltage ratings up to 4500V
High surge current capabilities
Diffused junction
Hockey Puk version
Case style DO-200AB (B-PUK)
Typical Applications
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
Major Ratings and Characteristics
IF(AV) 700 A
@ Ths 55 °C
IF(RMS) 1310 A
@ Ths 25 °C
IFSM @ 50Hz 7500 A
@ 60Hz 7850 A
I2t@
50Hz 281 KA2s
@ 60Hz 257 KA2s
VRRM range 3000 to 4500 V
TJ- 40 to 150 °C
Parameters SD700C..L Units
case style DO-200AB (B-PUK)
SD700C..L Series
2
Bulletin I2096 rev. B 04/00
www.irf.com
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = TJ max.
VVmA
30 3000 3100
36 3600 3700
40 4000 4100
45 4500 4600
ELECTRICAL SPECIFICATIONS
Voltage Ratings
SD700C..L 50
IF(AV) Max. average forward current 700 (345) A 180° conduction, half sine wave
@ Heatsink temperature 55 (85) °C Double side (single side) cooled
IF(RMS) Max. RMS forward current 1310 A @ 25°C heatsink temperature double side cooled
IFSM Max. peak, one-cycle forward, 7500 t = 10ms No voltage
non-repetitive surge current 7850 t = 8.3ms reapplied
6310 t = 10ms 50% VRRM
6600 t = 8.3ms reapplied Sinusoidal halfwave,
I2t Maximum I2t for fusing 281 t = 10ms No voltage Initial TJ = TJ max.
257 t = 8.3ms reapplied
199 t = 10ms 50% VRRM
182 t = 8.3ms reapplied
I2√t Maximum I2√t for fusing 2810 KA2√s t = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.66 V Ipk= 1000A, TJ = TJ max, tp = 10ms sinusoidal wave
A
KA2s
0.88 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
Parameter SD700C..L Units Conditions
Forward Conduction
V
mΩ
0.78 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
0.99 (I > π x IF(AV)),TJ = TJ max.
0.73 (I > π x IF(AV)),TJ = TJ max.
SD700C..L Series
3
Bulletin I2096 rev. B 04/00
www.irf.com
∆RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Ordering Information Table
1- Diode
2- Essential part number
3- 0 = Standard recovery
4- C = Ceramic Puk
5- Voltage code: code x 100 = VRRM (see Voltage Ratings Table)
6- L = Puk Case DO-200AB (B-PUK)
123 4 5 6
Device Code
SD 70 0 C 45 L
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Single Side Double Side Single Side Double Side
180°0.011 0.011 0.008 0.008
120°0.014 0.015 0.014 0.014
90°0.018 0.018 0.019 0.019 K/W TJ = TJ max.
60°0.026 0.026 0.027 0.028
30°0.045 0.046 0.046 0.046
TJMax. junction operating temperature range -40 to 150
Tstg Max. storage temperature range -55 to 200
RthJ-hs Max. thermal resistance, junction 0.11 DC operation single side cooled
to heatsink 0.05 DC operation double side cooled
F Mounting force, ± 10% 9800 N
(1000) (Kg)
wt Approximate weight 250 g
Case style DO-200AB(B-PUK) See Outline Table
Parameter SD700C..L Units Conditions
Thermal and Mechanical Specifications
°C
K/W
SD700C..L Series
4
Bulletin I2096 rev. B 04/00
www.irf.com
Outline Table
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
30
40
50
60
70
80
90
100
110
120
130
140
150
0 100 200 300 400 500
30° 60° 90° 120° 180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Single Side Cooled)
R (DC) = 0.11 K/W
th J-hs
Conduction Angle
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800
30°60°
90°
180°
DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Single Side Cooled)
R (D C) = 0.11 K/W
th J-hs
Conduction Period
BOTH ENDS
0.8 (0.03)
TWO PLACES
3.5(0.14) DIA. NOM. x
1.8(0.07) DEEP MIN.
34 (1.34) DIA. MAX.
58.5 (2.3 0) DIA . M AX .
26.9 (1.06)
25.4 (1)
BOTH ENDS
53 (2.09) DIA. MAX.
Case Style DO-200AB (B-PUK)
All dimensions in millimeters (inches)
Quote between upper and lower
pole pieces has to be considered
after application of Mounting Force
(see Thermal and Mechanical
Specification)
SD700C..L Series
5
Bulletin I2096 rev. B 04/00
www.irf.com
Fig. 4 - Current Ratings Characteristics
Fig. 6 - Forward Power Loss Characteristics
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800 1000 1200 1400
30°
60°
90°
180°
DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Double Side Cooled)
R (DC) = 0.05 K/W
thJ-hs
Conduction Period
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800 1000
30°60°90°120°180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Double Side Cooled)
R (DC) = 0.05 K/W
th J-hs
Conduction Angle
0
500
1000
1500
2000
2500
0 200 400 600 800 1000 1200 1400
DC
180°
120°
90°
60°
30°
Average Forward Current (A)
RMS Limit
Maximum Average Forward Power Loss (W)
SD 700C..L Series
T = 150°C
J
Conduction Period
0
500
1000
1500
2000
2500
0 200 400 600 800 1000
180°
120°
90°
60°
30°
Average Forward Current (A)
Maximum Average Forward Power Loss (W)
RMS Limit
SD700C..L Series
T = 150°C
J
Conduction Angle
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
2000
3000
4000
5000
6000
7000
1 10 100
Num ber Of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine Wave Forward Current (A)
SD700C..L Series
In itial T = 15 0 °C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
At Any Rated Load Condition And With
50% Rated V Applied Following Surge
RRM
1000
2000
3000
4000
5000
6000
7000
8000
9000
0.01 0.1 1
Pulse Train Duration (s)
Peak Half Sine W ave Forward Current (A)
Maximum Non Repetitive Surge Current
SD700C..L Series
50% Rated V Reapplied
No Voltage Reapplied
In itial T = 15 0 °C
RRM
J
Versus Pulse Train Duration.
Fig. 3 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics
SD700C..L Series
6
Bulletin I2096 rev. B 04/00
www.irf.com
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Fig. 9 - Forward Voltage Drop Characteristics
100
1000
10000
0.511.522.533.54
T = 25°C
J
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
SD 700C..L Series
T = 150°C
J
0.001
0.01
0.1
1
0.001 0.01 0.1 1 10
Square W ave Pulse Duration (s)
SD700C ..L Series
thJ-hs
Transient Thermal Im pedance Z (K/W )
Steady State Value
R = 0.11 K/W
(Single Side C ooled)
R = 0.05 K/W
(Double Side Cooled)
(D C Ope ration )
thJ-hs
thJ-hs
