Photocoupler Product Data Sheet CNY17-1 THRU CNY17-4 SERIES Spec No. :DS-70-99-0001 Effective Date: 07/25/2018 Revision: D LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto Photocoupler CNY17-1 THRU CNY17-4 SERIES 1. DESCRIPTION 1.1 Features Current transfer ratio (CTR : MIN. 40% at IF = 10mA, VCE = 5V) High collector-emitter voltage VCEO = 70V High input-output isolation voltage Viso = 5,000Vrms Response time (tr : TYP. 5s at VCE = 10V, IC = 2mA, RL = 100) Dual-in-line package: CNY17-1, CNY17-2, CNY17-3, CNY17-4 Wide lead spacing package: CNY17-1M, CNY17-2M, CNY17-3M, CNY17-4M Surface mounting package: CNY17-1S, CNY17-2S, CNY17-3S, CNY17-4S Tape and reel packaging: CNY17-1S-TA, CNY17-2S-TA, CNY17-3S-TA, CNY17-4S-TA CNY17-1S-TA1, CNY17-2S-TA1, CNY17-3S-TA1, CNY17-4S-TA1 Safety approval * UL approved (No. E113898) * TUV approved (No. R9653630) * CSA approved (No. CA91533-1) * FIMKO approved (No. 193422-01) * VDE approved (No. 40015248) * BSI approved (No. 9018-9) * CQC approved (No. CQC11001061921-2) Creepage distance > 8.0 mm ; Clearance > 8.0 mm The relevant models are the models Approved by VDE according to DIN EN 60747-5-5 Approved Model No.: CNY17-1-V, CNY17-2-V, CNY17-3-V, CNY17-4-V CNY17-1M-V, CNY17-2M-V, CNY17-3M-V, CNY17-4M-V CNY17-1S-V, CNY17-2S-V, CNY17-3S-V, CNY17-4S-V CNY17-1S-TA-V, CNY17-2S-TA-V, CNY17-3S-TA-V, CNY17-4S-TA-V CNY17-1S-TA1-V, CNY17-2S-TA1-V, CNY17-3S-TA1-V, CNY17-4S-TA1-V VDE approved No.: 40015248 (According to the specification DIN EN 60747-5-5) Operating isolation voltage VIORM : 850V (Peak) Transient voltage VTR : 6000V (Peak) Pollution : 2 (According to VDE 0110-1 : 1997-04) Clearances distance (Between input and output) : 7.0mm (MIN.) Creepage distance (Between input and output) : 7.0mm (MIN.) Isolation thickness between input and output : 0.4mm (MIN.) 1/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. Indication of VDE approval prints " " on sleeve package. RoHS Compliance All materials be used in device are followed EU RoHS directive (No.2002/95/EC). ESD pass HBM 8000V/MM2000V MSL class1 1.2 Applications Power Supply regulators Digital logic inputs Microprocessor inputs Appliance Sensor Systems Industrial Controls 2/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 2. PACKAGE DIMENSIONS 2.1 CNY17-1, CNY17-2, CNY17-3, CNY17-4 : 2.2 CNY17-1M, CNY17-2M, CNY17-3M, CNY17-4M : Notes : 1. 2-digit year code, example : 2016 = 16 2. 2-digit work week ranging from `01' to `53' 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 3/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 2.3 CNY17-1S, CNY17-2S, CNY17-3S, CNY17-4S : Notes : 1. 2-digit year code, example : 2016 = 16 2. 2-digit work week ranging from `01' to `53' 3. Factory identification mark shall be marked (Y: Thailand, W: China-CZ, X: China-TJ). 4. Model No.: CNY17-1, CNY17-2, CNY17-3, CNY17-4 4/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 2. TAPING DIMENSIONS CNY17-1S-TA, CNY17-2S-TA, CNY17-3S-TA, CNY17-4S-TA : CNY17-1S-TA1, CNY17-2S-TA1, CNY17-3S-TA1, CNY17-4S-TA1 : Description Symbol Dimension in mm (inch) Tape wide W 160.3 (0.63) Pitch of sprocket holes P0 40.1 (0.15) F 7.50.1 (0.295) P2 20.1 (0.079) P1 120.1 (0.472) Distance of compartment Distance of compartment to compartment 5/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25C Parameter Symbol Rating Unit Forward Current IF 60 mA Reverse Voltage VR 6 V Power Dissipation P 100 mW Junction Temperature TJ 125 C Collector - Emitter Voltage VCEO 70 V Emitter - Collector Voltage VECO 7 V Collector - Base Voltage VCBO 70 V Collector Current IC 150 mA Collector Power Dissipation PC 150 mW Total Power Dissipation Ptot 250 mW *1 Isolation Voltage Viso 5000 Vrms Operating Temperature Topr -55 ~ +100 C Storage Temperature Tstg -55 ~ +150 C *2 Soldering Temperature Tsol 260 C Input Output *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds 6/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 4.2 ELECTRICAL OPTICAL CHARACTERISTICS at Ta=25C PARAMETER INPUT SYMBOL MIN. TYP. MAX. UNIT Forward Voltage VF -- 1.45 1.65 V IF=60mA Reverse Current IR -- -- 10 A VR=6V Terminal Capacitance Ct -- -- 100 pF V=0, Collector Dark Current ICEO -- -- 50 nA VCE=10V, BVCEO 70 -- -- V Collector-Emitter Emitter-Collector Breakdown BVECO 7 -- -- V IC=0.1mA BVCBO 70 -- -- V Breakdown Voltage IF=0 40 CNY17-1 -- 63 CNY17-2 80 125 CTR *Transfer IF=10mA % CNY17-3 100 CNY17-4 160 -- 320 -- -- 0.3 VCE=5V 200 Collector-Emitter IF=10mA VCE(sat) TRANSFER IE=10A IF=0 Collector-Base Ratio IF=0 IF=0 Voltage Current f=1KHz IC=0.1mA Breakdown Voltage OUTPUT CONDITIONS V Saturation Voltage IC=2.5mA CHARACTERISTICS DC500V Isolation Resistance Riso 100 -- -- G 40 ~ 60% R.H. Floating Capacitance Cf -- -- 2 pF V=0, Response Time (Rise) tr -- 5 10 s VCE=10V, Response Time (Fall) tf -- 5 10 s RL=100 * CTR = f=1MHz IC=2mA IC x 100% IF 7/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 4.3 ISOLATION SPECIFICATION ACCORDING TO VDE Parameter Symbol Conditions Rating Unit 55/100/21 - 2 - 850 VPEAK tp=60s, qc<5pC 1275 VPEAK tp=1s, qc<5pC 1594 VPEAK tINI = 10s 6000 VPEAK IF = 0, Pc = 0 175 Class of environmental test - DIN IEC68 Pollution - DIN VDE0110 Remark Maximum Operating VIORM - Isolation Voltage Partial Discharge Test Diagram 1 Voltage (Between Input Vpr Diagram 2 and Output) Maximum Over-voltage VINITIAL Refer to the Diagram 1, 2 Safety Maximum Ratings 1) Case Temperature Tsi o C Refer to the 2) Input Current Isi Pc=0 400 mA Psi - 700 mW Figure 1, 3 3) Electric Power (Output or Total Power Issipation) Isolation Resistance (Test Voltage Between RISO Ta=Tsi MIN.109 Ta=Topr(MAX.) MIN.1011 Ta=25 oC MIN.1012 Input and Output : DC500V) Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of DIN EN 60747-5-5 * Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. VINITIAL ). And there is possibility that this product occurs partial discharge in operating isolation voltage (VIORM) 8/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 4.4 PARTIAL DISCHARGE TEST METHOD Method (A) for type testing and random testing. V VINTIAL Vpr VIORM tp tb t3 t1 tini t2 t4 t1, t2 = 1 to 10s t3, t4 = 1s tp (Partial Discharge Measuring Time)= 60s tb = 62s tini = 10s t Method (B) for routine testing. V Vpr VIORM t3 tp tb t4 t3, t4 = 0.1s tp (Partial Discharge Measuring Time)= 1s tb = 1.2s t The partial discharge level shall not exceed 5 pc during the partial discharge measuring time interval tp under the test conditions shown above. 9/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current IF (mA) 80 60 40 20 0 -55 -25 0 25 50 75 100 125 200 150 100 50 0 -55 -25 25 50 75 100 125 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current Fig.4 Forward Current vs. Forward Voltage 500 6 Ic= 0.5mA 1mA 2mA 3mA 5mA 5 4 o Ta= 25 C o Ta= 75 C o 50 C 200 Forward current IF (mA) Collector-emitter saturation voltage V (sat) (V) 0 o o Ambient temperature Ta ( C) 3 2 1 25oC o 0C o -25 C 100 50 20 10 5 2 0 1 0 2.5 5.0 7.5 10.0 12.5 0 Fig.5 Current Transfer Ratio vs. Forward Current 1.5 2.0 45 VCE= 5V Ta= 25 C 40 o 140 Collector current Ic (mA) 160 1.0 R = 120 100 80 100k 60 2.5 3.0 Fig.6 Collector Current vs. Collector-emitter Voltage 200 180 0.5 Forward voltage VF (V) Forward current IF (mA) Current transfer ratio CTR (%) 5. 500k 40 20 35 o Ta= 25 C IF = 30mA 20mA 30 Pc(MAX.) 25 20 10mA 15 10 5mA 5 2mA 0 0 0 2 5 10 20 Forward current I F(mA) 50 0 2 4 6 8 10 Collector-emitter voltage VCE(V) 10/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature 0.16 I F= 10mA VCE= 5V 100 50 0 -55 -25 0 25 50 75 Collector-emitter saturation voltage V (sat) (V) Relative current transfer ratio (%) 150 0.14 I F= 10mA I C= 2.5mA 0.12 0.10 0.08 0.06 0.04 0.02 0 -55 100 -6 50 10 10 10 -8 10 -9 75 100 I F= 10mA VCC= 5V Ta= 25 C VCE= 10V -7 o Response time ( s) Collector dark current ICEO(A) 25 Fig.10 Response Time vs. Load Resistance -10 10 -11 10 5 tr tf 2 1 -12 10 -13 10 -30 0 20 40 60 80 0.5 0.02 100 o 0.05 Fig.11 Frequency Response 0.2 Vcc IF = 10mA Vcc= 5V o Ta= 25 C Input RD RL Input Output Output 10% 90% -2 ts td tr -4 R = 200 150 tf 75 Test Circuit for Frequency Response -6 Vcc -8 -10 0.5 1 0.5 Test Circuit for Response Time 2 0 0.1 Load resistance RL (k ) Ambient temperature Ta ( C) Voltage gain Av (dB) 0 Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 10 -25 o o Ambient temperature Ta ( C) RD 2 5 10 20 RL Output 50 100 200 500 Frequency f (kHz) 11/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 6. TEMPERATURE PROFILE OF SOLDERING 6.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) 150C - Temperature Max (TSmax) 200C - Time (min to max) (ts) 9030 sec Soldering zone - Temperature (TL) 217C - Time (tL) 60 sec Peak Temperature (TP) 260C Ramp-up rate 3C / sec max. Ramp-down rate 3~6C / sec 20 sec Temperature ( C) Ramp-up TP 260 C TL 217 C Tsmax 200 C Ramp-down 60 sec tL (Soldering) Tsmin 150 C 25 C 60 ~ 120 sec ts (Preheat) 35~70 sec 12/15 Time (sec) Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 6.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5C Time: 10 sec. Preheat temperature:25 to 140C Preheat time: 30 to 80 sec. 6.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5C Time: 3 sec max. 13/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 7. RRECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit: mm 8. NAMING RULE FCNY17-X(1)-(2) DEVICE PART NUMBER (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package (2) TAPING TYPE (TA, TA1 or none) Please refer to orientation of taping on Page P5 FCNY17-X(1)-(2)-V DEVICE PART NUMBER (1) No suffix = Dual-in-Line package M = Wide lead spacing package S = Surface mounting package (2) TAPING TYPE (TA, TA1 or none) Please refer to orientation of taping on Page P5 (3) VDE Option 14/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D Photocoupler CNY17-1 THRU CNY17-4 SERIES 9. NOTES LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes without further notices. The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. When requiring a device for any "specific" application, please contact our sales in advice. If there are any questions about the contents of this publication, please contact us at your convenience. The contents described herein are subject to change without prior notice. Immerge unit's body in solder paste is not recommended. 15/15 Part No: CNY17-1 THRU CNY17-4 SERIES BNC-OD-C131/A4 Rev.: D