MMSZ5221BT1 Series Preferred Device Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features * * * * * * * 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 2.4 V to 110 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications General Purpose, Medium Current ESD Rating of Class 3 (>16 kV) per Human Body Model Pb-Free Packages are Available 1 Cathode 2 Anode SOD-123 CASE 425 STYLE 1 2 1 Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: MARKING DIAGRAM 260C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 1 MAXIMUM RATINGS Rating Total Power Dissipation on FR-5 Board, (Note 1) @ TL = 75C Derated above 75C Symbol PD Max Unit 500 6.7 mW mW/C C/W Thermal Resistance, Junction-to-Ambient (Note 2) RqJA 340 Thermal Resistance, Junction-to-Lead (Note 2) RqJL 150 C/W TJ, Tstg -55 to +150 C Junction and Storage Temperature Range xx = Device Code (Refer to page 3) M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Package Shipping MMSZ52xxBT1 SOD-123 3000/Tape & Reel MMSZ52xxBT1G SOD-123 (Pb-Free) 3000/Tape & Reel MMSZ52xxBT3 SOD-123 10000/Tape & Reel MMSZ52xxBT3G SOD-123 (Pb-Free) 10000/Tape & Reel Device Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 3.5 X 1.5 inches, using the minimum recommended footprint. 2. Thermal Resistance measurement obtained via infrared Scan Method. xx MG G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2010 April, 2010 - Rev. 9 1 Publication Order Number: MMSZ5221BT1/D MMSZ5221BT1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless I otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR IR VF IZT Zener Voltage Regulator http://onsemi.com 2 V MMSZ5221BT1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Notes 3 and 4) VZ (Volts) @ IZT Zener Impedance (Note 5) ZZT @ IZT Leakage Current ZZK @ IZK IR @ VR Device Marking Min Nom Max mA W W mA mA Volts MMSZ5221BT1, G MMSZ5222BT1, G MMSZ5223BT1, G MMSZ5224BT1, G MMSZ5225BT1, G C1 C2 C3 C4 C5 2.28 2.38 2.57 2.66 2.85 2.4 2.5 2.7 2.8 3.0 2.52 2.63 2.84 2.94 3.15 20 20 20 20 20 30 30 30 30 29 1200 1250 1300 1400 1600 0.25 0.25 0.25 0.25 0.25 100 100 75 75 50 1 1 1 1 1 MMSZ5226BT1, G MMSZ5227BT1, G MMSZ5228BT1, G MMSZ5229BT1, G MMSZ5230BT1, G D1 D2 D3 D4 D5 3.14 3.42 3.71 4.09 4.47 3.3 3.6 3.9 4.3 4.7 3.47 3.78 4.10 4.52 4.94 20 20 20 20 20 28 24 23 22 19 1600 1700 1900 2000 1900 0.25 0.25 0.25 0.25 0.25 25 15 10 5 5 1 1 1 1 2 MMSZ5231BT1, G MMSZ5232BT1, G MMSZ5233BT1, G MMSZ5234BT1, G MMSZ5235BT1, G E1 E2 E3 E4 E5 4.85 5.32 5.70 5.89 6.46 5.1 5.6 6.0 6.2 6.8 5.36 5.88 6.30 6.51 7.14 20 20 20 20 20 17 11 7 7 5 1600 1600 1600 1000 750 0.25 0.25 0.25 0.25 0.25 5 5 5 5 3 2 3 3.5 4 5 MMSZ5236BT1, G MMSZ5237BT1, G MMSZ5238BT1, G MMSZ5239BT1, G MMSZ5240BT1, G F1 F2 F3 F4 F5 7.13 7.79 8.27 8.65 9.50 7.5 8.2 8.7 9.1 10 7.88 8.61 9.14 9.56 10.50 20 20 20 20 20 6 8 8 10 17 500 500 600 600 600 0.25 0.25 0.25 0.25 0.25 3 3 3 3 3 6 6.5 6.5 7 8 MMSZ5241BT1, G MMSZ5242BT1, G MMSZ5243BT1, G MMSZ5244BT1, G MMSZ5245BT1, G H1 H2 H3 H4 H5 10.45 11.40 12.35 13.30 14.25 11 12 13 14 15 11.55 12.60 13.65 14.70 15.75 20 20 9.5 9.0 8.5 22 30 13 15 16 600 600 600 600 600 0.25 0.25 0.25 0.25 0.25 2 1 0.5 0.1 0.1 8.4 9.1 9.9 10 11 MMSZ5246BT1, G MMSZ5247BT1, G MMSZ5248BT1, G MMSZ5249BT1, G MMSZ5250BT1, G J1 J2 J3 J4 J5 15.20 16.15 17.10 18.05 19.00 16 17 18 19 20 16.80 17.85 18.90 19.95 21.00 7.8 7.4 7.0 6.6 6.2 17 19 21 23 25 600 600 600 600 600 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 12 13 14 14 15 MMSZ5251BT1, G MMSZ5252BT1, G MMSZ5253BT1, G MMSZ5254BT1, G MMSZ5255BT1, G K1 K2 K3 K4 K5 20.90 22.80 23.75 25.65 26.60 22 24 25 27 28 23.10 25.20 26.25 28.35 29.40 5.6 5.2 5.0 4.6 4.5 29 33 35 41 44 600 600 600 600 600 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 17 18 19 21 21 MMSZ5256BT1, G MMSZ5257BT1, G MMSZ5258BT1, G MMSZ5259BT1, G MMSZ5260BT1, G M1 M2 M3 M4 M5 28.50 31.35 34.20 37.05 40.85 30 33 36 39 43 31.50 34.65 37.80 40.95 45.15 4.2 3.8 3.4 3.2 3.0 49 58 70 80 93 600 700 700 800 900 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 23 25 27 30 33 MMSZ5261BT1, G MMSZ5262BT1, G MMSZ5263BT1, G MMSZ5264BT1, G MMSZ5265BT1, G N1 N2 N3 N4 N5 44.65 48.45 53.20 57.00 58.90 47 51 56 60 62 49.35 53.55 58.80 63.00 65.10 2.7 2.5 2.2 2.1 2.0 105 125 150 170 185 1000 1100 1300 1400 1400 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 36 39 43 46 47 MMSZ5266BT1, G MMSZ5267BT1, G MMSZ5268BT1, G MMSZ5269BT1 MMSZ5270BT1, G P1 P2 P3 P4 P5 64.60 71.25 77.90 82.65 86.45 68 75 82 87 91 71.40 78.75 86.10 91.35 95.55 1.8 1.7 1.5 1.4 1.4 230 270 330 370 400 1600 1700 2000 2200 2300 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 52 56 62 68 69 MMSZ5272BT1, G R2 104.5 110 115.5 1.1 750 3000 0.25 0.1 84 Device 3. The type numbers shown have a standard tolerance of 5% on the nominal Zener voltage. 4. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C $1C. 5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied. The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 KHz. *The "G'' suffix indicates Pb-Free package available. http://onsemi.com 3 MMSZ5221BT1 Series qVZ, TEMPERATURE COEFFICIENT (mV/C) qVZ, TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS 8 1000 7 TYPICAL TC VALUES FOR MMSZ5221BT1 SERIES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 VZ, NOMINAL ZENER VOLTAGE (V) 11 12 TYPICAL TC VALUES FOR MMSZ5221BT1 SERIES 100 VZ @ IZT 10 1 10 Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1.2 Ppk, PEAK SURGE POWER (WATTS) 1000 1.0 PD versus TL 0.8 0.6 PD versus TA 0.2 0 25 RECTANGULAR WAVEFORM, TA = 25C 100 0.4 0 50 75 100 T, TEMPERATURE (C) 125 150 10 1 Figure 3. Steady State Power Derating 1 10 100 PW, PULSE WIDTH (ms) 1000 1000 IZ = 1 mA TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) ZZT, DYNAMIC IMPEDANCE (W) 0.1 Figure 4. Maximum Nonrepetitive Surge Power 1000 100 75 V (MMSZ5267BT1) 91 V (MMSZ5270BT1) 100 5 mA 20 mA 10 10 150C 1 200 100 VZ, NOMINAL ZENER VOLTAGE (V) 1 10 VZ, NOMINAL ZENER VOLTAGE 100 1 0.4 Figure 5. Effect of Zener Voltage on Zener Impedance 0.5 75C 25C 0C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) Figure 6. Typical Forward Voltage http://onsemi.com 4 1.1 1.2 MMSZ5221BT1 Series 1000 TA = 25C C, CAPACITANCE (pF) 0 V BIAS 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 1 1 10 VZ, NOMINAL ZENER VOLTAGE (V) IR, LEAKAGE CURRENT (mA) TYPICAL CHARACTERISTICS 100 1000 100 10 1 +150C 0.1 0.01 0.001 + 25C 0.0001 -55C 0.00001 0 10 Figure 7. Typical Capacitance Figure 8. Typical Leakage Current TA = 25C TA = 25C IZ, ZENER CURRENT (mA) IZ, ZENER CURRENT (mA) 80 100 100 10 1 0.1 0.01 20 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 10 10 1 0.1 0.01 12 10 30 50 70 VZ, ZENER VOLTAGE (V) 90 Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) http://onsemi.com 5 90 MMSZ5221BT1 Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE G D AAAA AAAA AAAA A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A1 1 HE DIM A A1 b c D E HE L q E 2 q MIN 0.037 0.000 0.020 --0.055 0.100 0.140 0.010 0 INCHES NOM 0.046 0.002 0.024 --0.063 0.106 0.145 ----- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --10 STYLE 1: PIN 1. CATHODE 2. ANODE L b MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 ----0.15 1.60 1.40 1.80 2.54 2.69 2.84 3.56 3.68 3.86 ----0.25 --10 0 C SOLDERING FOOTPRINT* EEE EEE EEE 0.91 0.036 2.36 0.093 4.19 0.165 EEE EEE EEE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZ5221BT1/D