No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 1 TEL:886-3-4758711 FAX:886-3-4755197
SPECIFICATIONS
of
MULTILAYER CHIP CAPACITOR
NP0, X7R, Y5V
10V ~ 3000V
0402 (1005) ~ 1812 (4532)
0.5pF ~ 22µF
Version 2002NOV
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 2 TEL:886-3-4758711 FAX:886-3-4755197
Contents
1. MLCC Part Number Codes (No.21-S-004.D) ……………. Page 3
2. NPO Specifications (No.21-S-004.D) ……………. Page 4~5
3. X7R Specifications (No.21-S-004.D) ……………. Page 6~7
4. Y5V Specifications (No.21-S-004.D) ……………. Page 8~10
5. Tolerance and Capacitance (No.21-S-004.D) ……………. Page 10
6. Dimension Length,Width and MB (No.21-S-004.D) ……………. Page 11
7. NPO Capacitance and Voltage (No.21-S-004.D) ……………. Page 12
8. NPO Capacitance and High-Voltage (No.21-S-004.D) ……………. Page 13
9. X7R Capacitance and Voltage (No.21-S-004.D) ……………. Page 14
10. X7R Capacitance and High-Voltage (No.21-S-004.D) ……………. Page 15
11. Y5V Capacitance and Voltage (No.21-S-004.D) ……………. Page 16
12. Y5V Capacitance and High-Voltage (No.21-S-004.D) ……………. Page 17
13. Packing on Tape and Reel (No.21-S-004.D) ……………. Page 18~20
14. Description of the Standard Shipping Label (No.21-S-004.D) ……………. Page 21
15. Appendix I : Bending Test (No.21-S-004.D) ……………. Page 22
16. Appendix II : Adhesive Strength of Termination (No.21-S-004.D) ……………. Page 23
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 3 TEL:886-3-4758711 FAX:886-3-4755197
MLCC PART NUMBER CODES
HOW TO ORDER
For values below 10 pF, use "R" in place of decimal point, e.g., 4.7pF=4R7
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 4 TEL:886-3-4758711 FAX:886-3-4755197
NPO SERIAL PRODUCTS SPECIFICATIONS
Above product satisfies the requirements as follow：
NO. Test Items Test Condition Requirements
1. Visual &Mechanical • No remarkable defect.
• Dimensions to conform to individual specification
sheet.
2. Capacitance ≤1000pF 1.0±0.2Vrms，1MHz±10%
>1000pF 1.0±0.2Vrms，1KHz±10%
• Shall not exceed the limits given in the detailed
spec.
3. Q Value ≤1000pF 1.0±0.2Vrms，1MHz±10%
>1000pF 1.0±0.2Vrms，1KHz±10%
• More than 30pF: Q≥1000
• Less than 30pF: Q≥400+20C
• To apply voltage(<50V)：250% of rated
voltage for 1~5 sec.
• Charge & discharge current less than 50mA.
No evidence of damage or flash over during test.
4. Dielectric strength
100V
200V ~ 300V
500V ~ 999V
1000 ~ 3000V
Cut-off, set at 10mA
TEST= 15
RAMP=0
100V ≥ 3 times V DC
200V ~ 300V ≥ 2 times V DC
500V ~ 999V ≥ 1.5 times V DC
1000V ~ 3000V ≥ 1.2 times V DC
To apply rated voltage for max. 120sec. 10GΩ MIN. or 500Ω-F MIN. , whichever is smaller.
Rated Voltage:
100V ~ 500V
To apply rated voltage
> 10GΩ
5. Insulation resistance
Rated Voltage:
>500V
To apply 500V*60sec > 10GΩ
6. Temperature
coefficient
With no electrical load -55 ~ 125°C at 25°C Within ±30ppm/°C
7. Bending test • The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm per second until the
deflection becomes 1 mm and then the
pressure shall be maintained for 5 ±1 sec.
(Appendix 1)
• Measurement to be made after keeping at
room temp. for 24±2 hours
• No remarkable damage.
• Cap change : ±5.0% MAX. or ±0.5pF MAX. ,
whichever is larger.
This capacitance change means the change of
Capacitance under specified flexure of substrate from
the capacitance measured before the test.
8.
Solderability • Solder temperature :230±5°C
• Dipping time : 2±0.5 sec
• Solder : SN63A
90% MIN. coverage of all metalized area.
9. Resistance to
soldering heat • Solder temperature : 260±5°C
• Dipping time : 10±1 sec
• Solder : SN63A
• Measurement to be made after keeping at
room temp. for 24 ±2 hours.
• No remarkable damage.
• Cap change : ±2.5% MAX. or ±0.25pF MAX. ,
whichever is larger.
• Q & I.R. & Dielectric strength : To meet initial
requirements.
• 25% max. Leaching on each edge.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 5 TEL:886-3-4758711 FAX:886-3-4755197
NO. Test Items Test Condition Requirements
10. Temperature cycle • Test temp. : -55°C ~ 125°C
• Test step : 1) -55°C -3/+0 °C 30±3 min.
2) room temp. 2~3 min.
3)125°C +3/-0 °C 30±2min.
4) room temp. 2~3 min.
• Conduct the five cycles according to the
temperatures and time.
• Measurement to be made after keeping at
room temp. for 24±2 hours.
• No remarkable damage.
• Cap change : ±2.5% MAX. or ±0.25pF MAX. ,
whichever is larger.
• Q & I.R. ＆ Dielectric strength : To meet initial
requirements.
11 Humidity (Damp Heat)
steady state • Test temp. : 40±2°C
• Humidity : 90~95%RH
• Test time : 1000+24/-0hrs.
• Measurement to be made after keeping at
room temp. for 24 ±2 hrs.
• No remarkable damage.
• Cap change : ±5.0% MAX. or ±0.5pF MAX. ,
whichever is larger.
• Q value : More than 30pF Q≥350
10pF≤C<30pF Q≥275+2.5C
Less than 10pF Q≥200+10C
• I.R.：1GΩ MIN. or 50Ω-F MIN., whichever is
smaller.
12. Humidity (Damp Heat)
Load • Test temp. : 40±2°C
• Humidity : 90~95%RH
• Test time : 1000+24/-0hrs.
• To apply voltage :
• rated voltage (Max. 500V)
• Measurement to be made after keeping at
room temp. for 24 ±2 hours.
• No remarkable damage.
• Cap change : ±7.5%MAX. or ±0.75pF MAX. ,
whichever is larger.
• Q value : More than 30pF Q≥200
C< 30pF Q≥100+10/3C
• I.R. : 500MΩ MIN. or 25Ω-F MIN. , whichever is
smaller.
13. Adhesive strength of
termination • Pressurizing force： 1kg (10N)
• Test time : 10 ±1 sec (Appendix 2)
• No remarkable damage or removal of the
terminations.
14. Vibration Resistance • Vibration frequency : 10~55 Hz/min.
• Total amplitude : 1.5mm
• Test time : 6 hrs.(Two hours each in three
mutually perpendicular directions.)
• No remarkable damage.
• Cap change & Q : To meet initial requirements.
15. High Temperature
Load
(Endurance)
• Test temp. : 125±3°C
• To apply voltage :
V<500V : 200% of rated voltage.
V≥500V, <1000V : 150% of rated voltage.
V≥1000V : 120% of rated voltage.(Max.3600V)
• Test time : 1000+24/-0 hrs.
• Measurement to be made after keeping at
room temp. for 24 ±2 hours.
• No remarkable damage.
• Cap change : ±3.0% MAX. or ±0.3pF MAX. ,
whichever is larger.
• Q value : More than 30pF Q≥350
10pF≤C<30pF Q≥275+2.5C
Less than 10pF Q≥200+10C
• I.R. : 1GΩ MIN. or 50Ω-F MIN., whichever is
smaller.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 6 TEL:886-3-4758711 FAX:886-3-4755197
X7R SERIAL PRODUCTS SPECIFICATIONS
Above product satisfies the requirements as follow
NO. Test Items Test Condition Requirements
1. Visual &Mechanical • No remarkable defect.
• Dimensions to conform to individual specification
sheet.
2. Capacitance 1.0±0.2Vrms，1KHz±10% • Shall not exceed the limits given in the detailed
spec.
3. Dissipation factor 1.0±0.2Vrms，1KHz±10% • ≤2.5% Rated voltage : ≥50V
• ≤3.5% Rated voltage : 25V, 16V
• ≤5.0% Rated g voltage : 10V
• To apply voltage(<50V) : 250％ of rated
voltage for 1~5 sec.
• Charge & discharge current less than 50mA
No evidence of damage or flash over during test.
4. Dielectric strength
100V
200V ~ 300V
500V ~ 999V
1000V ~ 3000V
Cut off, set at 10mA
TEST=15
RAMP=0
100V ≥ 3 times V DC
200V ~ 300V ≥ 2 times V DC
500V~ 999V ≥ 1.5 times V DC
1000V ~ 3000V ≥ 1.2 times V DC
To apply rated voltage for max. 120sec. 10GΩ MIN. or 500Ω-F MIN. , whichever is smaller.
Rated Voltage:
100V ~ 500V
To apply rated voltage > 10GΩ
5. Insulation resistance
Rated Voltage:
> 500V
To apply 500V*60sec >10GΩ
6. Temperature
coefficient
With no electrical load -55 ~ 125°C at 25°C Within ±15％.
7. Bending test • The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm per second until the
deflection becomes 1 mm and then the
pressure shall be maintained for 5 sec.
Appendix 1)
• Measurement to be made after keeping at
room temp. for 24±2 hours
• No remarkable damage.
• Cap change : ≤±12.5%.
This capacitance change means the change of
capacitance under specified flexure of substrate from the
capacitance measured before the test.
8.
Solderability • Solder temperature : 230±5°C
• Dipping time : 2±0.5 sec
• Solder : SN63A
90% MIN. coverage of all metalized area.
9. Resistance to
soldering heat • Solder temperature : 260±5°C
• Dipping time : 10±1 sec
• Solder : SN63A
• Measurement to be made after keeping at
room temp. for 48±4 hours.
• No remarkable damage.
• Cap change : ＜±7.5%
• DF value & I.R : To meet initial standard value.
• Dielectric Strength : no defect.
• 25% max. Leaching on each edge.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 7 TEL:886-3-4758711 FAX:886-3-4755197
NO. Test Items Test Condition Requirements
10. Temperature cycle • Test temp. : -55°C ~ 125°C
• Test step :
1) -55°C -3/+0 °C 30±3 min.
2) room temp. 2~3 min.
3) 125°C +3/-0 °C 30±2 min.
4) room temp. 2~3min.
• Conduct the five cycles according to the
temperatures and time.
• Measurement to be made after keeping at
room temp. for 48 ±4 hours.
• No remarkable damage.
• Cap change : <±7.5％
• D.F value & I.R. : To meet initial standard value.
11 Humidity (Damp Heat)
steady state • Test temp.：40±2°C
• Humidity：90~95% RH
• Test time：1000+24/-0 hrs.
• Measurement to be made after keeping at
room temp. for 48±4 hrs.
• No remarkable damage.
• Cap change : <±12.5%
• DF value :
≤3.0% Rated voltage : 50V
≤5.0% Rated voltage : 25V, 16V
≤7.5% Rated voltage : 10V
• I.R. : 1GΩ MIN. or 50Ω-F MIN., whichever is
smaller.
12. Humidity (Damp Heat)
Load • Test temp.：40±2°C
• Humidity：90~95% RH
• Test time：1000+24/-0 hrs.
• To apply rated voltage (Max. 500V)
• Measurement to be made after keeping at
room temp. for 48±2 hours.
• No remarkable damage.
• Cap change : <±12.5%
• DF value :
≤3.0% Rated voltage : 50V
≤5.0% Rated voltage : 25V, 16V
≤7.5% Rated voltage : 10V
• I.R. : 500MΩ MIN. or 25Ω-F MIN., whichever is
smaller.
13. Adhesive strength of
termination
Pressurizing force : 1kg (10N)
Test time : 10±1 sec (Appendix 2)
No remarkable damage or removal of the
terminations.
14. Vibration Resistance • Vibration frequency : 10~55 Hz/min.
• Total amplitude : 1.5mm
• Test time : 6 hrs.(Two hours each in three
mutually perpendicular directions.)
• No remarkable damage.
• Cap change & DF : To meet initial requirements.
15. High Temperature
Load
(Endurance)
• Test temp. : 125±3°C
• To apply voltage :
V<500V : 200% of rated voltage.
V≥500V, <1000V : 150% of rated voltage.
V≥1000V : 120% of rated voltage.(Max.3600V)
• Test time : 1000+24/-0 hrs.
• Measurement to be made after keeping at
room temp. for 48±4 hours.
• No remarkable damage.
• Cap change : <±12.5%
• DF value :
≤3.0% Rated voltage : 50V
≤5.0% Rated voltage : 25V, 16V
≤7.5% Rated voltage : 10V
• I.R. : 1GΩ MIN. or 50Ω-F MIN., whichever is
smaller.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 8 TEL:886-3-4758711 FAX:886-3-4755197
Y5V SERIAL PRODUCTS SPECIFICATIONS
Above product satisfies the requirements as follow :
NO. Test Items Test Condition Requirements
1. Visual &Mechanical • No remarkable defect.
• Dimensions to conform to individual specification
sheet.
2. Capacitance C≤22µF, 1.0±0.2Vrms, 1KHz±10%
C > 22µF, 0.5±0.1Vrms, 120Hz±10Hz, 25°C
• Shall not exceed the limits given in the detailed
spec.
3. Dissipation factor C≤22µF, 1.0±0.2Vrms, 1KHz±10%
C > 22µF, 0.5±0.1Vrms, 120Hz±10Hz, 25°C
• DF≤5.0% (≥50V)
• DF≤5.0% (25V) [Except 0603≥0.1µF, 0805≥0.33µF,
1206≥1µF, DF≤7%]
• DF≤7.0% (C<1.0µF, 16V) [Except 0402≥0.068µF;
DF≥9%]
• DF≥9.0% (C≥1.0µF, 16V)
• DF≥12.5% (10V)
• To apply voltage(<50V) : 250% of rated
voltage for 1~5 sec.
• Charge & discharge current less than 50mA.
No evidence of damage or flash over during test.
4. Dielectric strength
100V
200V ~ 300V
500V ~ 999V
1000V ~ 3000V
Cut off, set at 10mA
TEST=15
RAMP=0
100V ≥ 3 times V DC
200V ~ 300V ≥2 times V DC
500V ~ 999V ≥1.5 times V DC
1000V ~ 3000V ≥1.2 times V DC
To apply rated voltage for max. 120sec. 10GΩMIN. or 500Ω-F MIN ,whichever is smaller.
Rated Voltage:
100V ~ 500V
To apply rated voltage >10GΩ
5. Insulation resistance
Rated Voltage:
>500V
To apply 500*60sec >10GΩ
6. Temperature
coefficient
With no electrical load -25°C ~ 85°C at 20°C Within +30% / -80%
7. Bending test • The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm per second until the
deflection becomes 1 mm and then the
pressure shall be maintained for 5 sec.
(Appendix 1)
• Measurement to be made after keeping at
room temp. for 48±4hours
• No remarkable damage.
• Cap change : ≤±30%
This capacitance change means the change of
Capacitance under specified flexure of substrate from
the capacitance measured before the test.
8.
Solderability • Solder temperature : 230±5°C
• Dipping time : 2±0.5 sec
• Solder : SN63A
90%MIN. coverage of all metalized area.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 9 TEL:886-3-4758711 FAX:886-3-4755197
NO. Test Items Test Condition Requirements
9. Resistance to
soldering heat • Solder temperature : 260±5°C
• Dipping time : 10±1 sec
• Solder : SN63A
• Measurement to be made after keeping at
room temp. for 48±4 hours.
• No remarkable damage.
• Cap change : <±20%
• D.F value & I.R. : To meet initial standard value.
• Dielectric strength : no defect.
• 25% max. leaching on each edge.
10. Temperature cycle • Test temp. : -55°C ~ 125°C
• Test step :
1) -55°C -3/+0 °C 30±3 min.
2) room temp. 2~3 min.
3) 125°C +3/-0 °C 30±2 min.
4) room temp. 2~3min.
• Conduct the five cycles according to the
temperatures and time.
• Measurement to be made after keeping at
room temp. for 48 ±4 hours.
• No remarkable damage.
• Cap change : <±20%
• D.F value & I.R. : To meet initial standard value.
11 Humidity (Damp Heat)
Steady State
• Test temp. : 40±2°C
• Humidity : 90~95% RH
• Test time : 1000+24/-0 hrs.
• Measurement to be made after keeping at
room temp. for 48±4 hrs.
• No remarkable damage.
• Cap change : <±30％
• DF value :
≤7.5% Rated voltage: ≥50V
≤7.5% Rated voltage:25V [Except 0603≥0.068µF;
0805≥0.33µF, 1206≥1µF, DF≤10%]
DF≤10.0% (C<1.0µF, 16V) [Except 0402≥0.1µF,
DF 12.5%]≦
DF≤12.5% (C≥1.0µF, 16V)
DF≤15% (10V)
• I.R. : 1GΩ MIN or 50Ω-F MIN ,whichever is smaller
12. Humidity
(Damp Heat)
Load
• Test temp. : 40±2°C
• Humidity : 90~95% RH
• Test time : 1000+24/-0 hrs.
• To apply voltage : rated voltage (Max. 500V)
• Measurement to be made after keeping at
room temp. for 48±4 hrs.
• No remarkable damage.
• Cap change : <±30％
• DF value :
≤7.5% Rated voltage: ≥50V
≤7.5% Rated voltage:25V [Except 0603≥0.1µF;
0805≥0.33µF, 1206≥1µF, DF≤10%]
DF≤10.0% (C<1.0µF、16V) [Except 0402≥0.068µF,
DF≤12.5%]
DF≤12.5% (C≥1.0µF、16V)
DF≤15% (10V)
• I.R. : 500MΩ MIN. or 25Ω-F MIN.,whichever is
smaller.
13. Adhesive strength of
termination • Pressurizing force : 1kg (10N)
• Test time:10±1sec (Appendix2)
No remarkable damage or removal of the terminations.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 10 TEL:886-3-4758711 FAX:886-3-4755197
NO. Test Items Test Condition Requirements
14 Vibration Resistance • Vibration frequency : 10~55 Hz/min.
• Total amplitude : 1.5mm
• Test time : 6 hrs.(Two hours each in three
mutually perpendicular directions.)
• No remarkable damage.
• Cap change & DF : To meet initial requirements
15. High Temperature
Load
(Endurance)
• Test temp. : 85±3°C
• To apply voltage :
V<500V : 200% of rated voltage.
V≥500V, <1000V : 150% of rated voltage.
V≥1000V : 120% of rated voltage.(Max.3600V)
• Test time : 1000+24/-0 hrs.
• Measurement to be made after keeping at
room temp. for 48±4 hours.
• No remarkable damage.
• Cap change : <±30%
• DF value :
≤7.5% Rated voltage: ≥50V
≤7.5% Rated voltage:25V [Except 0603≥0.1µF;
0805≥0.33µF, 1206≥1µF, DF≤10%]
DF≤10.0% (C<1.0µF、16V) [Except 0402≥0.068µF,
DF≤12.5%]
DF≤12.5% (C≥1.0µF, 16V)
DF≤15% (10V)
• I.R. : 1GΩ MIN. or 50Ω-F MIN., whichever is
smaller.
TOLERANCE AND CAPACITANCE
Capacitance & Tolerance NPO X7R Y5V
1R0=1.0pF
100=10pF
101=100pF
102=1000pF=1nF
103=10000pF=10nF
104=100nF
105=1000nF=1µF
106=10000nF=10 µF
0R5─104 101─105 103─226
B: ±0.1pF (Cap ≤ 5pF)
C: ±0.25pF (Cap ≤ 5pF)
D: ±0.5pF (5pF < Cap < 10pF)
F: ±1%
G: ±2%
J: ±5%
K: ±10%
M: ±20%
Z : -20% / +80%
B, C, D, F, G, J, K J, K, M M, Z
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 11 TEL:886-3-4758711 FAX:886-3-4755197
LENGTH, WIDTH, AND MB Unit: inch(mm)
size 0402 0603 0805 1206 1210 1808 1812
Length
0.040±0.0002
(1.00±0.05)
0.063±0.004
(1.60±0.10)
0.080±0.006
(2.00±0.15)
0.125±0.006
(3.20±0.15)
0.125±0.012
(3.20±0.30)
0.180±0.015
(4.50±0.40)
0.180±0.012
(4.50±0.30)
Width
0.020±0.002
(0.50±0.05)
0.030±0.003
(0.80±0.07)
0.050±0.004
(1.25±0.1)
0.063±0.006
(1.60±0.15)
0.063±0.008
(1.60±0.2)
<<Note>>
0.100±0.008
(2.50±0.20)
0.081±0.010
(2.03±0.25)
0.125±0.012
(3.20±0.30)
MB
0.010+0.002/-0.004
(0.25+0.05/-0.10)
0.015±0.006
(0.40±0.15)
0.020±0.008
(0.50±0.20)
0.025±0.008
(0.60±0.20)
0.030±0.010
(0.75±0.25)
0.030±0.010
(0.75±0.25)
0.030±0.010
(0.75±0.25)
Note : Width 1.60±0.2mm is applied to thickness G(=1.6±0.2mm), and width 1.60±0.15mm is applied to the others.
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 12 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE (NPO)
SIZE EIA CAP
VDCW CODE 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V
0.5pF 0R5 NNNNSSSSAAAA
11R0
NNNNSSSSAAAA
1.2 1R2 NNNNSSSSAAAA
1.5 1R5 NNNNSSSSAAAABBBB
1.8 1R8 NNNNSSSSAAAABBBB
2.2 2R2 NNNNSSSSAAAABBBB
2.7 2R7 NNNNSSSSAAAABBBB
3.3 3R3 NNNNSSSSAAAABBBB
3.9 3R9 NNNNSSSSAAAABBBB
4.7 4R7 NNNNSSSSAAAABBBB
5.6 5R6 NNNNSSSSAAAABBBB
6.8 6R8 NNNNSSSSAAAABBBB
8.2 8R2 NNNNSSSSAAAABBBB
10pF 100 NNNNSSSSAAAABBBB
12 120 NNNNSSSSAAAABBBB
15 150 NNNNSSSSAAAABBBB
18 180 NNNNSSSSAAAABBBB
22 220 NNNNSSSSAAAABBBBCCCC
27 270 NNNNSSSSAAAABBBBCCCC
33 330 NNNNSSSSAAAABBBBCCCC
39 390 NNNNSSSSAAAABBBBCCCC
47 470 NNNNSSSSAAAABBBBCCCC
56 560 NNNNSSSSAAAABBBBCCCC
68 680 NNNNSSSSAAAABBBBCCCC
82 820 NNNNSSSSAAAABBBBCCCC
100pF 101 NNNNSSSSAAAABBBBCCCC
120 121 NNNNSSSSAAAABBBBCCCC
150 151 NNNNSSSSAAAABBBBCCCC
180 181 NNN SSSSAAAABBBBCCCC
220 221 NNN SSSSAAAABBBBCCCC
270 271 NN SSSSAAAABBBBCCCC
330 331 NN SSSSAAAABBBBCCCC
390 391 NN SSSSBBBBBBBBCCCC
470 471 NN SSSSBBBBBBBBCCCC
560 561 SSSSBBBBBBBBCCCC
680 681 SSSSBBBBBBBBCCCC
820 821 SSSSBBBBBBBBCCCC
1000pF 102 SSSSBBBBBBBBCCCCDDDD
1200 122 SS BBBBBBBBCCCCDDDD
1500 152 SS BBBBBBBBCCCCDDDD
1800 182 SS BBBBBBBBCCCCDDDD
2200 222 SS BBBBBBBBCCCCDDDD
2700 272 SS DDDD BBBBCCCCDDDD
3300 332 SS DDDD BBBBCCCCDDDD
3900 392 DDDDBBB BCCCCDDDD
4700 472 DDD BBBBCCCCDDDD
5600 562 DD BBBBCCCCDDDD
6800 682 DD CCCCCCCCDDDD
8200 822 DD CCCCCCCCDDDD
0.01µF 103 DD DDDDCCCCDDDD
0.012 123 DD DD CCDDDDDD
0.015 153 DD CCDDDDDD
0.018 183 DD CC DDDD
0.022 223 DD CC DDDD
0.027 273 DD CC DDDD
0.033 333 DD CC DDDD
0.039 393 GG CC DD
0.047 473 DD DD
0.056 563 DD DD
0.068 683 DD
0.082 823 DD
0.1µF 104 DD
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
TAPE AND REEL: Size Unit : inch(mm )
――――
M=2.5±0.30mm ―――
―― PLASTIC 1Kp/REEL PLASTIC 1Kp/REEL
K=2.00±0.2mm ―――
――――
N=0.50±0.05mm PAPER 10Kp/REEL ――
――――
S=0.8±0.07mm ―PAPER 4Kp/REEL ―
PLASTIC 2Kp/REEL ― ― ―
G=1.60+/-0.2mm ―――
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 2Kp/REEL PLASTIC 1Kp/REEL
D=1.25±0.1mm ――
PLASTIC 3Kp/REEL
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ― ―
C=0.95+/-0.1mm ―――
PAPER 4Kp/REEL ―――
B=0.8+/-0.1mm ――
PAPER 4Kp/REEL
――――
A=0.6+/-0.1mm ――
PAPER 4Kp/REEL
1206(3216) 1210(3225) 1808(4520) 1812(4532)SIZE 0402(1005) 0603(1608) 0805(2012)
DIELECTRIC NPO
0402 0603 0805 1206 1210 1812
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 13 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE (Hi-Voltage NPO)
SIZE EIA CAP 0603
VDCW CODE 100 100 200 250 500 100 200 250 500 1000 2000 100 200 250 500 1000 2000 1000 2000 3000 100 200 250 500 1000 2000 3000
0.5pF 0R5 SAAAA
11R0
SAAAA
1.2 1R2 SAAAA
1.5 1R5 SAAAABBBBBB
1.8 1R8 SAAAABBBBBB
2.2 2R2 SAAAABBBBBB
2.7 2R7 SAAAABBBBBB
3.3 3R3 SAAAABBBBBB
3.9 3R9 SAAAABBBBBB
4.7 4R7 SAAAABBBBBB
5.6 5R6 SAAAABBBBBB
6.8 6R8 SAAAABBBBBB
8.2 8R2 SAAAABBBBBB
10pF 100 SAAA ABBBB BBCCCCCCDDDDDDDDDD
12 120 SAAA ABBBB BBCCCCCCDDDDDDDDDD
15 150 SAAA ABBBB BBCCCCCCDDDDDDDDDD
18 180 SAAA ABBBB BBCCCCCCDDDDDDDDDD
22 220 SAAA ABBBB BBCCCCCCDDDDDDDDDD
27 270 SAAA ABBBB BBCCCCCCDDDDDDDDDD
33 330 SAAA ABBBB BBCCCCCCDDDDDDDDDD
39 390 SAAA ABBBB BBCCCCCCDDDDDDDDDD
47 470 SAAA ABBBB BBCCCCCCDDDDDDDDDD
56 560 SAAA ABBBB BBCCCCCDDDDDDDDDDD
68 680 SAAA ABBBB BCCCCCCDDDDDDDDDDD
82 820 SAAA BBBBB BCCCCCCDDDDDDDDDDD
100pF 101 SAAA BBBBB BCCCCCCDDDDDDDDDDD
120 121 SAAA DBBBB BDCCCCCDDDDDDDDDDD
150 151 SABB DBBBB CDCCCCCDDDDDDDDDDD
180 181 SABB DBBBB CGCCCCCDDDKDDDDDDD
220 221 SADDDBBBB DGCCCCCDDDKDDDDDDD
270 271 SADDDBBBCD CCCCC DDKDDDDDDK
330 331 SADDDBBBC CCCCD DD DDDDDDK
390 391 SBDDDBBBC CCCCD DK DDDDDDK
470 471 SBD BCCC CCCCD DK DDDDDDK
560 561 SBD BCCC CCCC K K DDDDDD
680 681 BD BCCC CCCC KK DDDDDK
820 821 BD BCDD CCCC K DDDDDK
1000pF 102 B BC CCCC K DDDDKK
1200 122 B BC CDDD DDDDK
1500 152 B BC CDDD DDDDK
1800 182 B BD CDDD DDDD
2200 222 B BD CDD DDDD
2700 272 DB CDD DDDD
3300 332 D B CD DDDD
3900 392 D B CD DD
4700 472 BC DD
5600 562 BC DD
6800 682 CC DD
8200 822 CC D
0.01µF 103 CD
0.012 123 DD
0.015 153 DD
0.018 183 D
0.022 223 D
0.027 273 D
0.033µF 333 D
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
TAPE AND REEL: Size Unit : inch(mm)
――――
M=2.5±0.30mm ―――
―― PLASTIC 1Kp/REEL PLASTIC 1Kp/REEL
K=2.00±0.2mm ―――
――――
N=0.50±0.05mm PAPER 10Kp/REEL ――
――――
S=0.8±0.07mm ―PAPER 4Kp/REEL ―
PLASTIC 2Kp/REEL ― ― ―
G=1.60+/-0.2mm ―――
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 2Kp/REEL PLASTIC 1Kp/REEL
D=1.25±0.1mm ――
PLASTIC 3Kp/REEL
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ― ―
C=0.95+/-0.1mm ―――
PAPER 4Kp/REEL ―――
B=0.8+/-0.1mm ――
PAPER 4Kp/REEL
――――
A=0.6+/-0.1mm ――
PAPER 4Kp/REEL
1206(3216) 1210(3225) 1808(4520) 1812(4532)SIZE 0402(1005) 0603(1608) 0805(2012)
DIELECTRIC NPO
0805 1206 1210 1808 1812
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 14 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE (X7R BME)
SIZE EIA CAP
VDCW CODE 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V
100pF 101 NNNNSSSSBBBB
120 121 NNNNSSSSBBBB
150 151 NNNNSSSSBBBBB^B^B^B^
180 181 NNNNSSSSBBBBB^B^B^B^
220 221 NNNNSSSSBBBBB^B^B^B^
270 271 NNNNSSSSBBBBB^B^B^B^
330 331 NNNNSSSSBBBBB^B^B^B^
390 391 NNNNSSSSBBBBB^B^B^B^
470 471 NNNNSSSSBBBBB^B^B^B^
560 561 NNNNSSSSBBBBB^B^B^B^
680 681 NNNNSSSSBBBBB^B^B^B^
820 821 NNNNSSSSBBBBBBBB
1000pF 102 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
1200 122 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
1500 152 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
1800 182 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
2200 222 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
2700 272 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
3300 332 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
3900 392 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
4700 472 N N N N S S S S B B B B B B B B C^ C^ C^ C^ D^ D^ D^ D^
5600 562 NNN SSSSBBBBBBBBC^C^C^C^D^D^D^D^
6800 682 NNN SSSSBBBBBBBBC^C^C^C^D^D^D^D^
8200 822 NNN SSSSBBBBBBBBCCCCD^D^D^D^
0.01µF 103 NNN SSSSBBBBBBBBCCCCD^D^D^D^
0.012 123 NN SSSSBBBBBBBBCCCCD^D^D^D^
0.015 153 NN SSSSBBBBBBBBCCCCD^D^D^D^
0.018 183 NN SSSSBBBBBBBBCCCCD^D^D^D^
0.022 223 NN SSSSBBBBBBBBCCCCD^D^D^D^
0.027 273 N SSSSBBBBBBBBCCCCD^D^D^D^
0.033 333 N SSS BBBBBBBBCCCCD^D^D^D^
0.039 393 N SSS BBBBBBBBCCCCD^D^D^D^
0.047 473 N SSS BBBBBBBBCCCCD^D^D^D^
0.056 563 S S S B B B B B B B B C C C C D^ D^ D^ D^
0.068 683 S S S B B B B B B B B C C C C D^ D^ D^ D^
0.082 823 SS BBBDBBBBCCCCDDDD
0.1µF 104 SS BBBDBBBBCCCCDDDD
0.12 124 S BBBDBBBBCCCCDDDD
0.15 154 S DDDDCCCCCCCCDDDD
0.18 184 S DDD CCCCCCCCDDDD
0.22 224 S DDD CCCCCCCCDDDD
0.27 274 DDD CCC CCCCDDDD
0.33 334 DDD CCC CCCDDDDD
0.39 394 DD CC CCCDDDDD
0.47 474 DD DD CCC DDDD
0.56 564 DD DD DDDD
0.68 684 DDD DDDK
0.82 824 DDD DDDK
1µF 105 DDD DDDK
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
(2)[^] : the said items are made by NME(Noble Metal Electrode).
TAPE AND REEL: Size Unit : inch(mm)
DIELECTRIC X7R
0402 0603 0805 1206 1210 1812
SIZE 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1808(4520) 1812(4532)
A=0.6+/-0.1mm ――
PAPER 4Kp/REEL ――――
B=0.8+/-0.1mm ――
PAPER 4Kp/REEL PAPER 4Kp/REEL ―――
C=0.95+/-0.1mm ――― PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ― ―
D=1.25±0.1mm ――
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 2Kp/REEL PLASTIC 1Kp/REEL
G=1.60+/-0.2mm ―――PLASTIC 2Kp/REEL ― ― ―
S=0.8±0.07mm ―PAPER 4Kp/REEL ―――――
N=0.50±0.05mm PAPER 10Kp/REEL ――――――
K=2.00±0.2mm ――――― PLASTIC 1Kp/REEL PLASTIC 1Kp/REEL
M=2.5±0.30mm ―――――――
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 15 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE (Hi-Voltage X7R BME)
SIZE EIA CAP 0603
VDCW CODE 100 100 200 250 500 100 200 250 500 1000 1500 2000 100 200 250 500 1000 1000 1500 2000 100 200 250 500 1000 2000
100pF 101 S B B^ B^ B^
120 121 S B B^ B^ B^
150 151 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ B^ D^ D^ D^
180 181 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ B^ D^ D^ D^
220 221 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ B^ D^ D^ D^
270 271 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ B^ D^ D^ D^ D^ D^
330 331 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ B^ D^ D^ D^ D^ D^
390 391 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ C^ D^ D^ D^ D^ D^
470 471 S B B^ B^ B^ B^ B^ B^ B^ B^ B^ C^ D^ D^ D^ D^ D^
560 561 S B B^ B^ B^ B^ B^ B^ B^ B^ C^ C^ D^ D^ D^ D^ D^
680 681 S B B^ B^ B^ B^ B^ B^ B^ B^ C^ C^ D^ D^ D^ D^ D^
820 821 S B B^ B^ B^ B B^ B^ B^ B^ G^ G^ D^ D^ D^ D^ D^
1000pF 102 S B B^B^B^ B B^B^B^B^G^G^C^C^C^C^C^D^D^K^D^D^D^D^D^D^
1200 122 S B B^B^B^ B B^B^B^B^G^ C^C^C^C^C^D^D^K^D^D^D^D^D^D^
1500 152 S B B^B^B^ B B^B^B^C^G^ C^C^C^C^C^D^D^K^D^D^D^D^D^D^
1800 182 S B B^B^B^ B B^B^B^C^G^ C^C^C^C^C^D^D^K^D^D^D^D^D^D^
2200 222 S B B^B^B^ B B^B^B^D^G^ C^C^C^C^C^D^D^K^D^D^D^D^D^D^
2700 272 S B B^ B^ B^ B B^ B^ B^ G^ C^ C^ C^ C^ C^ D^ D^ D^ D^ D^ D^ D^ D^
3300 332 S B B^B^ B B^B^B^G^ C^C^C^C^D^D^K^ D^D^D^D^D^K^
3900 392 S B B^B^ B B^B^B^G^ C^C^C^C^ D^ D^D^D^D^D^K^
4700 472 S B B^B^ B B^B^B^ C^C^C^C^ D^ D^D^D^D^D^K^
5600 562 S B D^D^ B B^B^B^ C^C^C^C^ K^ D^D^D^D^D^
6800 682 S B D^D^ B B^B^B^ C^C^C^C^ K^ D^D^D^D^D^
8200 822 S B D^ D^ B B^ B^ C^ C C^ C^ C^ K^ D^ D^ D^ D^ D^
0.01µF 103 S B D^ D^ B B^ B^ C^ C C^ C^ C^ K^ D^ D^ D^ D^ D^
0.012 123 B B B^B^ C C^C^C^ D^D^D^D^K^
0.015 153 B B C^C^ C C^C^C^ D^D^D^D^K^
0.018 183 B B C^C^ C C^C^C^ D^D^D^D^
0.022 223 B B C^C^ C C^C^D^ D^D^D^D^
0.027 273 D B C^ C^ C C^ C^ D^ D^ D^ D^
0.033 333 D B G^ G^ C C^ C^ D^ D^ D^ D^
0.039 393 B G^ G^ C C^ C^ D^ D^ D^ D^
0.047 473 B G^ G^ C D^ D^ D^ D^ D^ D^
0.056 563 B C D^ D^ D^ D^ D^ K^
0.068 683 B C D^ D^ D^ K^
0.082 823 DC DD^D^K^
0.1µF 104 DC DD^D^K^
0.12 124 CDD^D^
0.15 154 DDK^K^
0.18 184 DDK^K^
0.22 224 DDK^K^
0.27 274 D
0.33 334 D
0.39 394 D
0.47 474 K
0.56 564 K
0.68 684 K
0.82 824
1µF 105
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
(2)[^] : the said items are made by NME(Noble Metal Electrode).
TAPE AND REEL: Size Unit : inch(mm)
DIELECTRIC X7R
0805 1206 1210 1808 1812
SIZE 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1808(4520) 1812(4532)
A=0.6+/-0.1mm ――
PAPER 4Kp/REEL ――――
B=0.8+/-0.1mm ――
PAPER 4Kp/REEL PAPER 4Kp/REEL ―――
C=0.95+/-0.1mm ――― PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ― ―
D=1.25±0.1mm ――
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 2Kp/REEL PLASTIC 1Kp/REEL
G=1.60+/-0.2mm ―――PLASTIC 2Kp/REEL ― ― ―
S=0.8±0.07mm ―PAPER 4Kp/REEL ―――――
N=0.50±0.05mm PAPER 10Kp/REEL ――――――
K=2.00±0.2mm ――――― PLASTIC 1Kp/REEL PLASTIC 1Kp/REEL
M=2.5±0.30mm ―――――――
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 16 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE (Y5V BME)
SIZE EIA CA
P
VDCW CODE 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V 10V 16V 25V 50V
1000pF 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01µF 103 NNNNSSSSAAAABBBB
0.012 123 NNNNSSSSAAAABBBB
0.015 153 NNNNSSSSAAAABBBB
0.018 183 NNNNSSSSAAAABBBB
0.022 223 NNNNSSSSAAAABBBB
0.027 273 NNNNSSSSAAAABBBB
0.033 333 NNNNSSSSAAAABBBB
0.039 393 NNN SSSSAAAABBBB
0.047 473 NNN SSSSAAAABBBB
0.056 563 NN SSSSAAAABBBB
0.068 683 NN SSSSAAAABBBB
0.082 823 NN SSSSAAAABBBB
0.1µF 104 NN SSSSAAAABBBBCCCCDDDD
0.15 154 N SSSSAAAABBBBCCCCDDDD
0.22 224 N SSS AAAABBBBCCCCDDDD
0.33 334 SSS BBBBBBBBCCCCDDDD
0.47 474 SS BBB BBBBCCCCDDDD
0.68 684 S BBD BBBBCCCCDDDD
1µF 105 S BBD CCCCCCCCDDDD
1.5 155 DD CCC CCC DDDD
2.2 225 DD CCC CCC DDDD
3.3 335 D DDD CCC DDDD
4.7 475 D DD CCD DDDD
6.8 685 D CC DDDD
10µF 106 D DD DDD
22µF 226 D
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
TAPE AND REEL: Size Unit : inch(mm)
DIELECTRIC Y5V
0402 0603 0805 1206 1210 1812
SIZE 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1808(4520) 1812(4532)
A=0.6+/-0.1mm ――
PAPER 4Kp/REEL ――――
B=0.8+/-0.1mm ――
PAPER 4Kp/REEL PAPER 4Kp/REEL ―――
C=0.95+/-0.1mm ――― PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ― ―
D=1.25±0.1mm ――
PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 2Kp/REEL PLASTIC 1Kp/REEL
G=1.60+/-0.2mm ―――PLASTIC 2Kp/REEL ― ― ―
S=0.8±0.07mm ―PAPER 4Kp/REEL ―――――
N=0.50±0.05mm PAPER 10Kp/REEL ――――――
K=2.00±0.2mm ――――― PLASTIC 1Kp/REEL PLASTIC 1Kp/REEL
M=2.5±0.30mm ―――――――
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 17 TEL:886-3-4758711 FAX:886-3-4755197
CAPACITANCE AND VOLTAGE
(
Hi-Volta
g
e Y5V BME
)
SIZE EIA CAP
VDCW CODE 100 200 250 100 200 250 100 200 250 100 200 250
0.01μF103 BBBBBBCCCDDD
0.015 153 BBBBBBCCCDDD
0.022 223 BBBBBBCCCDDD
0.033 333 BBBBBBCCCDDD
0.047 473 BBBBBBCCCDDD
0.068 683 BBBBBBCCCDDD
0.1μF104 B BBBCCCDDD
0.15 154 CCCCCCDDD
0.22 224 CCDDD
0.33 334 CDDD
0.47 474 DDD
0.68 684 DDD
1μF105 D
(1)OTHER SIZE , CAPACITANCE , VOLTAGE , AND 13" REEL ARE AVAILABLE UPON CUSTOMER'S REQUEST.
TAPE AND REEL: Size Unit : inch(mm)
*** NEW PRODUCTS PROMOTION ***
(1). X5R Series,
X5R 0402 56nF- 100nF /10
V
(2). Multi-layer C-array Series,
NPO 0603*4(8P4C) 10pF- 470pF /50
V
X7R 0603*4(8P4C) 100pF- 100nF /16V
X7R 0603*4(8P4C) 100pF- 10nF /50V,25
V
Y5V 0603*4(8P4C) 10nF- 100nF /50V,25
V
(3). Low Inductance Capacitor (LIC) Series,
X5R 0306 100nF- 220nF /10V
X7R 0612 10nF- 100nF /50
V
PLASTIC 1Kp/REEL
M=2.5±0.30mm ――――
K=2.00±0.2mm ―――
―
N=0.50±0.05mm ――――
S=0.8±0.07mm ―――
PLASTIC 1Kp/REEL
G=1.60+/-0.2mm ―PLASTIC 2Kp/REEL ― ―
D=1.25±0.1mm PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL
―
C=0.95+/-0.1mm ― PLASTIC 3Kp/REEL PLASTIC 3Kp/REEL ―
B=0.8+/-0.1mm PAPER 4Kp/REEL PAPER 4Kp/REEL ―
1812(4532)
A=0.6+/-0.1mm PAPER 4Kp/REEL ―――
SIZE 0805(2012) 1206(3216) 1210(3225)
DIELECTRIC Y5V
0805 1206 1210 1812
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 18 TEL:886-3-4758711 FAX:886-3-4755197
PACKING ON TAPE AND REEL
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 19 TEL:886-3-4758711 FAX:886-3-4755197
PACKING ON TAPE AND REEL
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 20 TEL:886-3-4758711 FAX:886-3-4755197
PACKING ON TAPE AND REEL
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 21 TEL:886-3-4758711 FAX:886-3-4755197
DESCRIPTION OF THE STANDARD SHIPPING LABEL
a. Customer name
b. WALSIN order serial number and item number
c. Customer P/O
d. Customer P/N
e. Description of specifications
f. Quantity
g. Quantity and WALSIN P/N or customer P/N in bar code
h. Material serial number of WALSIN
i. Shipping date
j. Order bar code including serial number and item numberSerial
number of the label
Information of caution/precaution handling of chip : 1. No bumping & pressurizing when carry. 2. Keep out of water.
Walsin Standard Label (MLCC) :
z 1st Column : 0603 NPO 7.0pF +-0.50pF50V <<Content: product description>>
(1). 0603: Size (2). NPO : Dielectric (3). 7.0pF : Capacitance (4) +/-0.50pF: Tolerance
z 2nd Column : 0603N7R0D500NT 1001000010 4000 <<Content: Part number + batch number of taping
+quantity per reel(pcs)>>
(1). 0603N7R0D500NT: Part number
(2). 1001000010: Batch number of taping (2.1) 000010: random number
(3). 4000: quantity per reel (unit: pieces)
z 3rd Column: Bar code <<Content:The reading is same as 2nd column>>
0603N7R0D500NT 1001000010 4 (Quantity unit: Kpcs)
z 4th Column: -11980293-083001181402- 16 0100002974 002
(1). - : Tap (6). 0100002974 : Batch number of bulk
(2). 11980293 : Employee number (7). 002 : Series of copies
(3). 083001 : Mouth , Date, Year (The date of printing)
(4). 181402 : Hour, minute, second (Printing Time)
(5). 16 : Copies of label(with same batch number)
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 22 TEL:886-3-4758711 FAX:886-3-4755197
Appendix 1 Bending test
1. Testing Substrate:
The testing substrate shall the testing substrate A given in Fig.1, the substrate shall be that of class GE4 specified in JIS C6484 or at
least the equivalent, the thickness shall be 1.6mm and thickness of copper foil be 0.035mm.
1.6
External Size of Capacitor Dimensions of Pattern (Unit : mm)
Symbol W*L a b c d
0402 0.5*1.0 0.4 1.5 0.5 1.0
0603 0.8*1.6 1.0 3.0 1.2 1.0
0805 1.25*2.0 1.2 4.0 1.65 1.0
1206 1.6*3.2 2.2 5.0 2.0 1.0
1210 2.5*3.2 2.2 5.0 2.9 1.0
1812 3.2*4.5 3.5 7.0 3.7 1.0
2. Testing Method:
2.1 The capacitor shall be soldered to testing substrate A.
2.2 The substrate shall be so placed with it’s surface on which capacitor is mounted downwards that the center of capacitor coincides
with the center of supports as illustrated in Fig2.
Fig.2 Flexural test of substrate
No.21-S-004.D-E1
Walsin Technology Corporation
WALSIN TECHNOLOGY CORPORATION
YANG-MEI PLANT:
566-1, KAO-SHI ROAD, 5 LIN, YANG-MEI, TAO-YUAN, TAIWAN,
R.O.C
Sheet no. 23 TEL:886-3-4758711 FAX:886-3-4755197
Appendix 2 Adhesive strength of termination
1. Testing Substrate:
The testing substrate shall be the testing substrate A illustrated in Fig.1.
Fig.1 Testing substrate A
External Size of Capacitor Dimensions of Pattern Unit : mm
Symbol W*L a b c
0402 0.5*1.0 0.4 1.5 0.5
0603 0.8*1.6 1.0 3.0 1.2
0805 1.25*2.0 1.2 4.0 1.65
1206 1.6*3.2 2.2 5.0 2.0
1210 2.5*3.2 2.2 5.0 2.9
1812 3.2*4.5 3.5 7.0 3.7
Remark : Material of substrate shall be alumina or glass fabric base epoxy resin.
Alumina : purity 95% or more, thickness 0.6mm or more.
Glass fabric base epoxy resin : Class GE4 specified in JIS C6484 or the equivalent.
Thickness 1.6mm and copper foil thickness 0.035mm.
2. Testing Method:
The pressurizing force shall be gradually applied to the center side surface of capacitor in the capacitor in the direction
horizontal and parallel to the testing substrate as shown in Fig.2.
capacitor
1Kg(10N)
Testing substrate
Fig.2 Direction of Pressurizing
