C4AE C4AE SERIES BOX CAPACITORS DC LINK RoHS COMPLIANT CAPACITORS FOR PCB APPLICATIONS P [mm] 27.5 37.5 52.5 nr pins 2 4 4 Od [mm] 0.8 1.2 1.2 all dimensions are in mm GENERAL TECHNICAL DATA Dielectric Application Climatic category Max. operating temperature Upper temperature TMAX Lower temperature TMIN Standard Protection Installation Leads Packaging RoHS compliance ELECTRICAL CHARACTERISTICS Capacitance tolerance Dissipation factor PP typical (tg0) Surge voltage Overvoltage (IEC 61071) Peak non Repetitive current Insulation Resistance Capacitance deviation in operation Permissible relative humidity Polypropylene metallized film - non inductive self-healing DC filtering / DC-Link 40/85/56 IEC 60068-1 +105C +85C IEC 61071 - Endurance Test Temperature -40C IEC 61071 Solvent resistant plastic case UL94 V-0 Thermosetting resin sealing UL94 V-0 compliant Any position Tinned copper wires - standard lead wire length 6 (0/-2) mm Packed in cardboard trays with protection for the terminals Compliant with the restricted substance requirements of Directive 2002/95/EC 5% at T = 25C 0.0002 at 10kHz with T = 25C 5C 1.5 * UNDC for max 10 times in life time at 25C 1.15 * UNDC for max 30 min - once per day 1.3 * UNDC for max 1 min - once per day 1.5 * Ipkr - max 1000 times in life time IR x C 30.000 seconds at 100Vdc 1 min. T = 25C 1.5% max. on capacitance value measured at T = 25C Annual average 70%; 85% on 30 days/year randomly distributed throughout the year. Dewing not admissible LIFE EXPECTANCY Life expectancy Capacitance drop at end of life Failure rate IEC 61709 100.000 hours at UNDC @ Hot-Spot temperature THS = 85C -5% (typical) 300 FIT at UNDC @ Hot-Spot temperature THS = 85C TEST METHOD Test voltage between terminals Test voltage between terminals and case Damp Heat Change of temperature 1.5 * UNDC for 10sec or 1.65 UNDC for 2sec, at T = 25C 3.2 kVac 50Hz for 2sec IEC 60068-2-78 IEC 60068-2-14 STP/AC 24th Feb 2012 All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. KEMET's product warranty is set forth at www.kemet.com under Terms and Conditions of Sale. C4AE C F UNDC Vdc dV/dt V/s Ipkr Apk ESL nH ESR Irms* 70C@10kHz 70C@10kHz m Arms Rth (C/W) B DIMENSIONS (mm) H L P C4AEGBU4450A1WJ 4.5 450 14 65 25 14.2 4.5 44 11 20 31.5 27.5 \ C4AEGBU4680A1XJ 6.8 450 15 101 25 10.0 6.0 36 13 25 31.5 27.5 \ PART NUMBER P1 C4AEGBU5100A1YJ 10 450 14 145 26 7.4 7.5 33 14 28 31.5 27.5 \ C4AEGBU5125A11J 12.5 450 15 187 26 6.2 8.5 29 19 29 31.5 27.5 \ C4AEGBU5200A12J 20 450 15 303 28 4.8 11.0 23 22 37 31.5 27.5 \ C4AEGBW5300A3FJ 30 450 10 298 30 4.1 13.0 20 20 40 41.5 37.5 10.2 C4AEGBW5350A3JJ 35 450 10 355 30 3.5 14.0 18 28 37 42.5 37.5 10.2 C4AEGBW5400A3HJ 40 450 10 406 30 3.1 16.0 17 24 44 41.5 37.5 10.2 C4AEGBW5500A3LJ 50 450 10 508 30 2.5 18.0 15 30 45 42 37.5 20.3 C4AEGBW5750A3MJ 75 450 7 503 35 3.4 18.0 12 30 45 57.5 52.5 20.3 C4AEGBW6100A3NJ 100 450 7 677 35 2.6 22.0 10 35 50 57.5 52.5 20.3 C4AEHBU4330A1WJ 3.3 600 17 55 25 17.0 4.0 44 11 20 31.5 27.5 \ C4AEHBU4560A1XJ 5.6 600 17 94 25 10.7 6.0 36 13 25 31.5 27.5 \ C4AEHBU4700A1YJ 7 600 17 118 26 9.0 7.0 33 14 28 31.5 27.5 \ C4AEHBU5100A11J 10 600 17 169 26 6.8 8.5 29 19 29 31.5 27.5 \ C4AEHBU5150A12J 15 600 17 253 28 5.3 10.5 23 22 37 31.5 27.5 \ C4AEHBW5200A3FJ 20 600 11 229 30 5.3 11.0 20 20 40 41.5 37.5 10.2 C4AEHBW5300A3JJ 30 600 11 337 30 3.6 14.0 18 28 37 42.5 37.5 10.2 C4AEHBW5400A3LJ 40 600 11 458 30 2.8 18.0 15 30 45 42 37.5 20.3 C4AEHBW5550A3MJ 55 600 8 425 35 4.1 16.5 12 30 45 57.5 52.5 20.3 C4AEHBW5750A3NJ 75 600 8 579 35 3.1 20.5 10 35 50 57.5 52.5 20.3 C4AEJBU4270A1WJ 2.7 700 19 51 25 18.3 4.0 44 11 20 31.5 27.5 \ C4AEJBU4400A1XJ 4 700 19 77 25 12.9 5.5 36 13 25 31.5 27.5 \ C4AEJBU4500A1YJ 5 700 19 96 26 10.7 6.0 33 14 28 31.5 27.5 \ \ C4AEJBU4800A11J 8 700 19 154 26 7.3 8.0 29 19 29 31.5 27.5 C4AEJBU5125A12J 12.5 700 19 241 28 5.5 10.0 23 22 37 31.5 27.5 \ C4AEJBW5150A3FJ 15 700 13 196 30 6.2 10.0 20 20 40 41.5 37.5 5.1 C4AEJBW5200A3JJ 20 700 13 262 30 4.7 12.5 18 28 37 42.5 37.5 10.2 C4AEJBW5220A3HJ 22 700 13 288 30 4.3 13.0 17 24 44 41.5 37.5 10.2 C4AEJBW5300A3LJ 30 700 13 389 30 3.2 16.5 15 30 45 42 37.5 20.3 C4AEJBW5450A3MJ 45 700 9 389 35 4.4 16.0 12 30 45 57.5 52.5 20.3 C4AEJBW5550A3NJ 55 700 9 485 35 3.6 19.0 10 35 50 57.5 52.5 20.3 C4AEJBW5600A3NJ 60 700 9 530 35 3.4 19.5 10 35 50 57.5 52.5 20.3 C4AEOBU4150A1WJ 1.5 900 24 36 25 26.3 3.5 44 11 20 31.5 27.5 \ C4AEOBU4270A1XJ 2.7 900 24 65 25 15.3 5.0 36 13 25 31.5 27.5 \ C4AEOBU4330A1YJ 3.3 900 24 79 26 12.9 5.5 33 14 28 31.5 27.5 \ C4AEOBU4500A11J 5 900 24 120 26 9.1 7.0 29 19 29 31.5 27.5 \ C4AEOBU4800A12J 8 900 24 193 28 6.6 9.5 23 22 37 31.5 27.5 \ C4AEOBW5120A3FJ 12 900 16 190 30 6.3 10.0 20 20 40 41.5 37.5 10.2 C4AEOBW5140A3JJ 14 900 16 229 30 5.4 11.5 18 28 37 42.5 37.5 10.2 C4AEOBW5160A3HJ 16 900 16 256 30 4.8 13.0 17 24 44 41.5 37.5 10.2 C4AEOBW5200A3LJ 20 900 16 321 30 3.9 15.0 15 30 45 42 37.5 20.3 C4AEOBW5300A3MJ 30 900 11 324 35 5.2 15.0 12 30 45 57.5 52.5 20.3 C4AEOBW5400A3NJ 40 900 11 428 35 4.0 18.0 10 35 50 57.5 52.5 20.3 * Irms value that leads to a T of ~15C in the Hot Spot STP/AC THS = TAMB + T = 70C + 15C = 85C 24th Feb 2012 All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. KEMET's product warranty is set forth at www.kemet.com under Terms and Conditions of Sale. C4AE C F UNDC Vdc dV/dt V/s Ipkr Apk ESL nH ESR Irms* 70C@10kHz 70C@10kHz m Arms Rth (C/W) B DIMENSIONS (mm) H L P C4AEQBU4100A1WJ 1 1100 28 28 25 33.1 3.0 44 11 20 31.5 27.5 \ C4AEQBU4180A1XJ 1.8 1100 29 52 25 19.1 4.5 36 13 25 31.5 27.5 \ C4AEQBU4220A1YJ 2.2 1100 29 63 26 16.0 5.0 33 14 28 31.5 27.5 \ C4AEQBU4330A11J 3.3 1100 29 95 26 11.2 6.5 29 19 29 31.5 27.5 \ PART NUMBER P1 C4AEQBU4500A12J 5 1100 29 145 28 8.2 8.5 23 22 37 31.5 27.5 \ C4AEQBW4800A3FJ 8 1100 20 157 30 7.9 9.0 20 20 40 41.5 37.5 10.2 10.2 C4AEQBW5100A3JJ 10 1100 20 196 30 6.3 11.0 18 28 37 42.5 37.5 C4AEQBW5120A3LJ 12 1100 20 235 30 5.3 13.0 15 30 45 42 37.5 20.3 C4AEQBW5200A3MJ 20 1100 13 262 35 6.5 13.0 12 30 45 57.5 52.5 20.3 C4AEQBW5250A3NJ 25 1100 13 331 35 5.2 16.0 10 35 50 57.5 52.5 20.3 C4AEQBW5270A3NJ 27 1100 13 354 35 4.9 16.5 10 35 50 57.5 52.5 20.3 * Irms value that leads to a T of ~15C in the Hot Spot THS = TAMB + T = 70C + 15C = 85C Part number decoding C4 A E G B U 4 5 0 0 A 1 W J 1-2 3 4 5 6 7 8 9 10 11 12 13 14 15 DC Voltage Case Code Terminals Code Variants Terminals Diameter Case Size B x H x L - mm Tolerance Series MKP capacitors Power Box - Wire Terminals DC-Link E = 300V G = 450V H = 600V I = 800V J = 700V K = 750V L = 500V M = 850V N = 1000V O = 900V Q = 1100V U = 1300V U = Single Copper wire B = Box plastic case W= Double copper wire Z= Special wire Capacitance Code (pF) Digits 9, 10, & 11 indicate the first 3 digits of capacitance value. Digit 8 indicates the number of zeros that must be added to obtain rated capacitance in pF. A = Standard 1 = 0.8 mm B = Special 2 = 1.0 mm H* = 100C 3 = 1.2 mm 0=INTERNAL A=10x20x32 B=13x22x32 C=14x28x32 D=15x24x32 E=18x33x32 F=20x40x41.5 G=22x37x32 H=24x44x41.5 J=28x37x42.5 L=30x45x42 M=30x45x57.5 N=35x50x57.5 W=11x20x31.5 X=13x25x31.5 Y=14x28x31.5 1=19x29x31.5 2=22x37x31.5 J = 5% K = 10% Reminder It is not possible to manufacture every part number which could be created from the coding description. Please refer to the table of standard part numbers above and ask Kemet for other possibilities (*) available on request 100C true High Temperature Film with no Voltage derating Marking Typical data on marking: MKP C4AE 8 uF +-5% Un = 1100 V- Dielectric type Series Capacitance Tolerance Rated Voltage -40 SH AO Climatic Category Temperatures - Min / Max Self-Healing dielectric Production date**: Year/Month - Day - Prod Line (Internal Code) + 85C 01CM st ** Year/Month correspondence table available on General Catalog - in the example A=2010 / O=October / 01=1 / CM=internal STP/AC 24th Feb 2012 All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. KEMET's product warranty is set forth at www.kemet.com under Terms and Conditions of Sale. C4AE Lifetime expectancy / Failure quota Notes : THS = TAMB + T T = ESR * Irms2 * Rth Irms should be limited to values granting T 30C STP/AC 24th Feb 2012 All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. KEMET's product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.