60
BHS CONNECTOR
3.5mm pitch/Disconnectable Crimp style connectors
Emboss Tape
0.9
1.5
0.9
1.5
1.3
8.05
4.75
2.85
4.65
4.3
(0.35) 0.7
Material and Finish
Model No. Applicable wire
mm2AWG#
Insulation O.D.
(
mm
)
Q'ty / reel
Phosphor bronze, tin-plated (reflow treatment)
SBHS-002T-P0.5A 0.08〜0.22 28〜24 10,0000.9〜1.7
RoHS compliance
Note: Contact JST for SBHS-002T-P0.5.
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #24)
• Voltage rating: 1,400V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 3,800V AC/minute
• Applicable wire: AWG #28 to #24
Insulation O.D./0.9 to 1.7mm
*RoHS compliant products are published.
*Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards
–––––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
• Low profile
• SMT configuration
• Applicable to special wires
• Housing lock also serves as polarizing
device
• Adopt wide large for socket contact
0.2
1.0min.
6.5max.
10.6min.
±0.1
1.9
±0.1
8.4
±0.1
0.35
±0.1
0.85
13.9
3.2
Solder tabs Solder tails
Note: 1. Tolerances are non-cumulative:
±
0.1mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Contact
Crimping
machine
AP-K2N MKS-L
  ―  
MK/SBHS-002-05
―
Applicator
Crimp applicator Dies
APLMK SBHS002-05
―
Crimp applicator with dies
SBHS-002T-P0.5A
Contact
PC board layout (viewed from component side) and Assembly layout
61
BHS CONNECTOR
Material
PA 66, UL94V-0, natural (white)
Circuits Q'ty / bagModel No.
2 1,000BHSR-02VS-1（N）
Material and Finish
Post: Brass, copper-undercoated, tin-plated (reflow treatment)
Wafer: PPA, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Circuits Q'ty / reelModel No.
2 1,000SM02B-BHSS-1-TB
2
HJST
1
3.2
2.4
7.5
3.5
2.0
10.6
H JST
3.2
3.5
7.5
1.5
1.5
8.7
10.5
RoHS compliance This product displays (LF)(SN) on a label.
Note: The products listed above are supplied on embossed tape.
RoHS compliance
Note: Contact JST for BHSR-02VS-1.
Housing
Shrouded header
BHS CONNECTOR
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
2.0±0.5
(
φ
13)
φ
380±2.0
Carrier tape
Cover tape
(6.75)
+2.5
–1.0
17.5
4.0±0.1 2.0±0.1
16.0±0.1
φ
1.55±0.05
1.75±0.1
16.0±0.3
7.5±0.1
Feeding direction
Cover tape leaderCarrier tape
The end part
160min.
Connector
mounting part 400min.
Leader part
100min.
Note:
1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions,
etc. are determined by the number of circuits and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.