Emboss Tape BHS CONNECTOR 3.5mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0A AC, DC (AWG #24) * Voltage rating: 1,400V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 3,800V AC/minute * Applicable wire: AWG #28 to #24 Insulation O.D./0.9 to 1.7mm * RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Low profile * SMT configuration * Applicable to special wires * Housing lock also serves as polarizing device * Adopt wide large for socket contact Standards ------------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout Solder tabs Solder tails 0.1 1.9 0.2 3.2 1.0min. 6.5max. 0.350.1 0.850.1 13.9 8.40.1 10.6min. Note: 1. Tolerances are non-cumulative: 0.1mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Model No. SBHS-002T-P0.5A 0.080.22 4.75 4.65 0.91.7 10,000 Phosphor bronze, tin-plated (reflow treatment) 4.3 (0.35) 0.7 1.5 1.5 RoHS compliance Note: Contact JST for SBHS-002T-P0.5. 0.9 Contact Crimping machine Crimp applicator SBHS-002T-P0.5A AP-K2N 60 2824 Material and Finish 8.05 2.85 0.9 1.3 Insulation O.D. (mm) Q'ty / reel MKS-L Applicator Dies Crimp applicator with dies MK/SBHS-002-05 APLMK SBHS002-05 BHS CONNECTOR Housing Circuits 2 7.5 2.0 3.2 Model No. BHSR-02VS-1N Q'ty / bag 1,000 Material PA 66, UL94V-0, natural (white) 1 2 H JST 10.6 RoHS compliance Note: Contact JST for BHSR-02VS-1. 3.5 2.4 Shrouded header Circuits 2 10.5 8.7 7.5 1.5 H JST 3.2 3.5 1.5 Model No. SM02B-BHSS-1-TB Q'ty / reel 1,000 Material and Finish Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PPA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed tape. 61 BHS CONNECTOR Taping specifications ------------------------------------------------------ Feeding direction Feeding direction 3802.0 Carrier tape 2.00.5 4.00.1 2.00.1 (6.75) 7.50.1 1.550.05 1.750.1 17.5 +2.5 -1.0 16.00.1 Note: 1. Specifications conform to JIS C 0806. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. Specifications are subject to change without prior notice. Cover tape 16.00.3 (13) The end part Connector mounting part 160min. Carrier tape Cover tape leader Leader part 100min. 400min.