waar MP15005/WMP1510/W VISHAY Vishay Lite-On Power Semiconductor 15A Bridge Rectifier Features Diffused junction Low reverse leakage current Surge overload rating to 300A peak Low power loss, high efficiency Case to terminal isolation voltage 2500V UL Listed under recognized component index, file number E95060 14.454 Absolute Maximum Ratings Tj = 25C Repetitive peak reverse voltage MP15005/W | Varn 50 Vv =Working peak reverse voltage MP1501/W | =VawM 100 Vv =DC Blocking voltage MP1502/W =VR 200 Vv MP1505/W 400 Vv MP1506/W 600 Vv MP1508/W 800 Vv MP1510/W 1000 Vv Peak forward surge current lesm 300 A Average forward current Tce=55C lEAy 15 A Junction and storage temperature range T=Tstg | -65...4125 | C Electrical Characteristics Tj = 25C Forward voltage Ir=7.5A Ve 1.1 Vv Reverse current Tce=25C IR 10 uA Tce=125C IR 0.5 mA I@t Rating for fusing 4 373 | Aes Diode capacitance VrR=4V, f=1MHz Cp 200 pF Thermal resistance junction to case | mounted on heatsink Rihuc 6.3 KAW Rev. A2, 24-Jun-98 1 (4)MP15005/WMP1510/W Vishay Lite-On Power Semiconductor VISHAY Characteristics (Tj = 25C unless otherwise specified) 25 < o 20 5 oO To 5 15 = oO LL 10 Do @ g a) > it 0 15725 Resistive or inductive load N\ rN 25 50 75 100 125 Tamb Ambient Temperature ( C ) Figure 1. Max. Average Forward Current vs. Ambient Temperature 1000 10 |. Forward Current (A) 100 1 0.2 0.6 1.0 14 1.8 2.2 18726 Ve Forward Voltage ( V ) Figure 2. Typ. Forward Current vs. Forward Voltage < 400 Single Half Sine-Wave = (JEDEC Method) o 6 300 & IN 5 MA n NY g 200 s = IN Na > x NL w 100 o MN o ls tp _ 0 1.0 10 100 18727 Number of Cycles at 60 Hz Figure 3. Max. Peak Forward Surge Current vs. Number of Cycles 10 < a 3 1.0 5 Oo 2 3 @ ol I _ 0.01 0 20 40 60 80 100 120 140 15728 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typ. Reverse Current vs. Percent of Rated Peak Reverse Voltage Rev. A2, 24-Jun-98waar MP15005/WMP1510/W VISHAY Vishay Lite-On Power Semiconductor Dimensions in mm A C H MP (AC) MP/MP-W _ of yb Dim Min Max ~ A 28.40 28.10 B 10.97 11.23 C)]} (AC) c {70 | 16.70 G E 22.86 25.40 H G 13.50 14.50 TT H | Hole for#10 screw rH $5.08 Nominal a) La J [17.50 18.50 | 2 4 K 10.90 11.90 L 00.97 61.07 M 30.50 - N 10.97 11.23 P H P 17.60 18.60 AUL Dimensions in mm MP-W (AC) (+) Oo oe L| =< W'" Suffix Designates Wire Leads No Suffix Designates Faston Terminals (-) (AC) = i =| 4 | + technical drawings t_____ according to UIN specifications 14480 _ |. L Case: molded plastic with heatsink internally mounted in the bridge encapsulation Terminals: plated leads solderable per MIL-STD-202, method 208 Polarity: symbols marked on case Approx. weight: MP 24 grams, MP-W 21 grams Mounting: through hole for #10 screw Mounting torque: 8.0 Inch-pounds maximum Mounting position: any Marking: type number Rev. A2, 24-Jun-98 3 (4)MP15005/W-MP1510/W Vishay Lite-On Power Semiconductor VEISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. Itis particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the nextten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. AnnexA, Bandlist oftransitional substances ofthe Montreal Protocol andthe London Amendments respectively 2. Class | and Il ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 4 (4) Rev. A2, 24-Jun-98