P6SMBJ SERIES 1 of 6 © 2006 Won-Top Electronics
Pb
P6SMBJ SERIES
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Features
Glass Passivated Die Construction
600W Peak Pulse Power Dissipation B
5.0V – 170V Standoff Voltage
Uni- and Bi-Directional Versions Available D
Excellent Clamping Capability A
Fast Response Time F
Plastic Case Material has UL Flammability
Classification Rating 94V-O C H G
E
Mechanical Data
Case: SMB/DO-214AA, Molded Plastic
Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
Polarit y: Cathode Ba nd Ex c ept Bi-Directio nal
Marking: Device Code
Weight: 0.093 grams (approx.)
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 6
“C” Suffix Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designates 10% Tolerance Devices
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic Symbol Value Unit
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3 PPPM 600 Minimum W
Peak Pulse Current on 10/1000µS Waveform (Not e 1) Figure 4 IPPM See Table 1 A
Steady State Power Dissipation (Note 4) PM(AV) 5.0 W
Peak Forward Surge Current 8.3ms Singl e Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3) IFSM 100 A
Typi cal Thermal Resistance ,Junction to Lead (Note 5) RθJL 20 °C/W
Typi cal Thermal Resistance, Junction to Ambient (Not e 5) RθJA 100 °C/W
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Non-repetit i ve current pulse per Figure 4 and derated above TA = 25°C per Figure 1.
2. Mounted on 5.0mm2 (0.013mm thick) land area.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
4. Lead temperature at 75°C.
5. Mounted on minimum recommended pad layout.
WTE
POWER SEM IC ON DUC TOR S
SMB/DO-214AA
Dim Min Max
A 3.30 3.94
B 4.06 4.70
C 1.91 2.11
D 0.152 0.305
E 5.08 5.59
F 2.13 2.44
G 0.051 0.203
H 0.76 1.27
All Dimensions in mm