1 2 3 4 5 6 7 8 9 A A SPECIFICATIONS Voltage rating: Current rating: Contact material: Contact plating: B 250VAC 1 amp Brass Gold over nickel in contact area Tin over copper on solder tails Contact resistance: 20 milliohms max. Insul. resistance: 5,000 megohms min. at 500VDC Withstanding: 1,000VAC for 1 min. Insulator: Nylon 6T, UL94V-0, black Operating temp.: -40C to +105C Soldering temp.: 260C for 5-10 sec. C B Recommended PC Board Layout C (A=.230") D D (C=.05") A=(2.54 x (No. of contacts/2)) B=(2.54 x (No. of contacts/2-1)) E F E Series C2PH Pin header, DIP type, .40mm square pins RoHS compliant Rev. Description No. of Rows Height H (mm) Type 2 X SM 2=Dual rows [blank]=1.50, SM=Surface mount 1=Single row B=1.00, C=1.70*, RA=Right angle D=2.00, E=2.54* [blank]=Straight *Dual row only Date Approved G Drawing Name Approved Howard Checked Lizzy Drawn Tina 0.0 0.35 1 2 3 4 No. of Pins XX 1-40 (single row) 2-80 (double row) Mating Length CS CS=Customer specified A=.230" C=.05" TN=Tin Options XX [blank]=None TR=Tape & reel CP=Centering pin TB=Tube PPL=Pick cap F Date Central Components Manufacturing 06/21/07 440 Lincoln Blvd., Middlesex, New Jersey 08846 Phone 732 469-5720 888 288-5152 Fax 732 469-1919 06/21/07 06/21/07 Part No.:C2PH-2-E-SM-XX-CS(.230/.05)-XX-XX 0.00 0.20 Angles 3 UNIT: mm 5 Plating XX SGXX=Duplex GDXX=Gold XX=Flash if blank, 03, 05, 10, 15, 30" Description: Pin header, dual row, 1.27mm (0.05") by 1.27mm (0.05") pitch 6 7 8 9 G