Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
DF DF DF DF DF DF DF
Parameter
Symbol
005MA
01MA 02MA 04MA 06MA 08MA 10MA Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified current
at TA= 40°C IF(AV) 1.0 A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method) IFSM 30 A
Rating for fusing (t < 8.3ms) I2t 4.5 A2sec
Typical thermal resistance per leg (Note 1) RθJA 40
RθJL 15 °C/W
Operating junction and storage temperature range
TJ, TSTG
–55 to +150 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
DF DF DF DF DF DF DF
Parameter
Symbol
005MA
01MA 02MA 04MA 06MA 08MA 10MA Unit
Maximum instantaneous forward voltage drop
per leg at 1.0A VF1.1 V
Maximum reverse current TA= 25°C 5.0
at rated DC blocking voltage per leg TA= 125°C IR500 µA
Typical junction capacitance per leg at 4.0V, 1MHz CJ25 pF
Note: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads
New Product
0.315 (8.00)
0.285 (7.24)
0.013 (3.3)
0.0086 (0.22)
0.350 (8.9)
0.300 (7.6)
0.255 (6.5)
0.245 (6.2)
0.335 (8.51)
0.320 (8.12)
0.045 (1.14)
0.035 (0.89)
0.080 (2.03)
0.050 (1.27)
0.023 (0.58)
0.018 (0.46)
0.185 (4.69)
0.150 (3.81)
0.130 (3.3)
0.120 (3.05)
0.075 (1.90)
0.055 (1.39)
0.205 (5.2)
0.195 (5.0)
Dimensions in inches and (millimeters)
7/27/00
Features
• This series is UL listed under the Recognized
Component Index, file number E54214
• Plastic package used has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated chip junction
• High surge overload rating of 30 Amperes peak
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260°C/10 seconds, at 5 lbs. (2.3kg) tension
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols as marked on body
Mounting Position: Any
Weight: 0.04 oz., 1.0g
Packaging codes/options: 45/50 ea.per Bulk Tube
DF005MA thru DF10MA
Miniature Glass Passivated
Single-Phase Bridge Rectifier
Reverse Voltage 50 and 1000V
Forward Current 1.0A
Case Style DFM
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1
10
110 100
1
10
100
20 40 60 80 100 120 140150
0
0.5
1.0
110 100
0
5
10
15
20
25
30
020 40 60 80 100
0.01
0.1
1
10
100
0.01 0.1 110 100
0.1
1
10
100
Fig. 1 - Derating Curve Output
Rectified Current Fig. 2 - Maximum Non-Repetitive Peak
Forward Surge Current Per Leg
Fig. 4 - Typical Reverse Leakage
Characteristics Per Leg
Fig. 6 - Typical Transient Thermal
Impedance
Fig. 3 - Typical Forward Characteristics
Per Leg
Fig. 5 - Typical Junction Capacitance
Per Leg
Average Forward Output Current (A)
Average Forward Output Current (A)
Instantaneous Reverse Current (A)Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)Junction Capacitance (pF)
Ambient Temperature (°C) Number of Cycles at 60 Hz
Percent of Rated Peak Reverse Voltage (V)
t, Heating Time (sec.)
Instantaneous Forward Voltage (V)
Re verse Voltage (V)
60 Hz
Resistive or
Inductive Load
P.C.B mounted on
0.51 x 0.51" (13 x 13mm)
Copper pads with 0.06"
(1.5mm) lead length
TJ = 25°C
Pulse width = 300µs
1% Duty Cycle
TJ = 150°C
Single Sine-Wave
(JEDEC Method)
TJ = 25°C
f = 1.0 MHz
Vsig = 50mVp-p
1.0 Cycle
TJ = 125°C
TJ = 50°C
DF005MA thru DF10MA
Miniature Glass Passivated
Single-Phase Bridge Rectifier
