LITE-ON SEMICONDUCTOR SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS SMBJ SERIES STAND-OFF VOLTAGE - 5.0 to 350 Volts POWER DISSIPATION - 600 WATTS FEATURES For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1uA above 10V Fast response time: typically less than 1.0ns for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMB SMB A B C MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.003 ounces, 0.093 gram G H D F E DIM. MIN. MAX. A 4.06 4.57 B 3.30 3.94 C 1.96 2.21 D 0.15 0.31 E 5.21 5.59 F 0.05 0.20 G 2.01 2.50 H 0.76 1.52 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS SYMBOLS VALUE UNIT PEAK POWER DISSIPATION AT TJ = 25 , TP = 1ms (Note 1) PPK 600 WATTS Peak Forward Surge Current 8.3ms single half sine-wave@Tj=25 (Note 2) IFSM 100 AMPS. PM(AV) 1.5 WATTS VF SEE NOTE 3 Volts R0JA R0JL R0JC 90 21 25 C/W TJ -55 to +175 C TSTG -55 to +175 C Steady State Power Dissipation at TL =120 lead lenghts 0.375" (9.5mm) , see fig.4 Without Heatshink Maximum Instantaneous forward voltage at 50A for unidirectional devices only (Note 3) Typical Thermal Resistance (Note 4) Operating Temperature Range Storage Temperature Range REV. 10, Nov-2011, KSIB02 NOTES :1. Non-repetitive current pulse, per fig. 3 and derated above TJ= 25 per fig.1. 2. Only for unidirectional units. 3. VF= 3.5V on SMBJ5.0 thru SMBJ90A devices and VF= 5.0V on SMBJ100 thru SMBJ350A devices. 4. Thermal resistance from junction to ambient, lead and case. RATING AND CHARACTERISTIC CURVES SMBJ SERIES PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OFPEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 75 50 25 10 X 1000 WAVEFORM AS DEFINED BY R.E.A. 0 0 25 50 75 125 100 150 175 200 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 100 80 60 40 Pulse Width 8.3ms Single Half-Sine-Wave 20 0 1 2 5 JUNCTION TEMPERATURE, 20 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - PULSE WAVEFORM FIG.4 - TYPICAL JUNCTION CAPACITANCE 10000 Peak value (IRSM) 100 Half value= Uni-directional IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM 50 10 x 1000 waveform as defined by R.E.A. TJ=25 C CAPACITANCE , (pF) IP, PEAK PULSE CURRENT , (% ) TR=10us 1000 Bi-directional TJ = 25 C 100 TP 10 0 1 0 1.0 2.0 3.0 10 4.0 FIG.5 - PULSE RATING CURVE PP, PEAK POWER ( KW ) TA=25 C NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG 3. 10 1.0 5.0mm LEAD AREAS 0.1 0.1us 1.0us 10us 100us TP, PULSE WIDTH 1.0ms 10ms PM(AV) STEADY STATE POWER DISSIPATION (W) T , TIME ( ms ) 100 100 1000 STAND-OFF VOLTAGE, VOLTS FIG.6 - STEADY STATE POWER DERATING CURVE 2.5 2.0 1.5 1.0 0.5 DC Current 0.0 0 25 50 75 100 125 150 TL,LEAD TEMPERATURE, 175 200 LITE-ON SEMICONDUCTOR Device Unidirectional Device Bidirectional Device Marking code Working PeakReverse Voltage Maximum Maximum Reverse Voltage Breakdowm voltage Reverse Surge at IRSM VBR Volts (Clamping Current Voltage) Min. Max. @IT( mA) VRSM(V) IRSM(A) Maximum Reverse Leakage at VRWM (UNI) (BI) VRWM(V) SMBJ5.0A SMBJ5.0CA KE AE 5.0 6.40 7.07 10 9.2 65.2 IR (uA) 800 SMBJ6.0A SMBJ6.0CA KG AG 6.0 6.67 7.37 10 10.3 58.3 800 SMBJ6.5A SMBJ6.5CA KK AK 6.5 7.22 7.98 10 11.2 53.6 500 SMBJ7.0A SMBJ7.0CA KM AM 7.0 7.78 8.60 10 12.0 50.0 200 SMBJ7.5A SMBJ7.5CA KP AP 7.5 8.33 9.21 1.0 12.9 46.5 100 SMBJ8.0A SMBJ8.0CA KR AR 8.0 8.89 9.83 1.0 13.6 44.1 50.0 SMBJ8.5A SMBJ8.5CA KT AT 8.5 9.44 10.4 1.0 14.4 41.7 20.0 SMBJ9.0A SMBJ9.0CA KV AV 9.0 10.0 11.1 1.0 15.4 39.0 10.0 SMBJ10A SMBJ10CA KX AX 10.0 11.1 12.3 1.0 17.0 35.3 5.0 SMBJ11A SMBJ11CA KZ AZ 11.0 12.2 13.5 1.0 18.2 33.0 5.0 SMBJ12A SMBJ12CA LE BE 12.0 13.3 14.7 1.0 19.9 30.2 5.0 SMBJ13A SMBJ13CA LG BG 13.0 14.4 15.9 1.0 21.5 27.9 5.0 SMBJ14A SMBJ14CA LK BK 14.0 15.6 17.2 1.0 23.2 25.8 5.0 SMBJ15A SMBJ15CA LM BM 15.0 16.7 18.5 1.0 24.4 24.0 5.0 SMBJ16A SMBJ16CA LP BP 16.0 17.8 19.7 1.0 26.0 23.1 5.0 SMBJ17A SMBJ17CA LR BR 17.0 18.9 20.9 1.0 27.6 21.7 5.0 SMBJ18A SMBJ18CA LT BT 18.0 20.0 22.1 1.0 29.2 20.5 5.0 SMBJ20A SMBJ20CA LV BV 20.0 22.2 24.5 1.0 32.4 18.5 5.0 SMBJ22A SMBJ22CA LX BX 22.0 24.4 27.0 1.0 35.5 16.9 5.0 SMBJ24A SMBJ24CA LZ BZ 24.0 26.7 29.5 1.0 38.9 15.4 5.0 SMBJ26A SMBJ26CA ME CE 26.0 28.9 31.9 1.0 42.1 14.2 5.0 SMBJ28A SMBJ28CA MG CG 28.0 31.1 34.4 1.0 45.4 13.2 5.0 SMBJ30A SMBJ30CA MK CK 30.0 33.3 36.8 1.0 48.4 12.4 5.0 SMBJ33A SMBJ33CA MM CM 33.0 36.7 40.6 1.0 53.3 11.3 5.0 SMBJ36A SMBJ36CA MP CP 36.0 40.0 44.2 1.0 58.1 10.3 5.0 SMBJ40A SMBJ40CA MR CR 40.0 44.4 49.1 1.0 64.5 9.3 5.0 SMBJ43A SMBJ43CA MT CT 43.0 47.8 52.8 1.0 69.4 8.6 5.0 SMBJ45A SMBJ45CA MV CV 45.0 50.0 55.3 1.0 72.7 8.3 5.0 SMBJ48A SMBJ48CA MX CX 48.0 53.3 58.9 1.0 77.4 7.7 5.0 SMBJ51A SMBJ51CA MZ CZ 51.0 56.7 62.7 1.0 82.4 7.3 5.0 SMBJ54A SMBJ54CA NE DE 54.0 60.0 66.3 1.0 87.1 6.9 5.0 SMBJ58A SMBJ58CA NG DG 58.0 64.4 71.2 1.0 93.6 6.4 5.0 SMBJ60A SMBJ60CA NK DK 60.0 66.7 73.7 1.0 96.8 6.2 5.0 SMBJ64A SMBJ64CA NM DM 64.0 71.1 78.6 1.0 103 5.8 5.0 SMBJ70A SMBJ70CA NP DP 70.0 77.8 86.0 1.0 113 5.3 5.0 SMBJ75A SMBJ75CA NR DR 75.0 83.3 92.1 1.0 121 4.9 5.0 SMBJ78A SMBJ78CA NT DT 78.0 86.7 95.8 1.0 126 4.7 5.0 SMBJ85A SMBJ85CA NV DV 85.0 94.4 104 1.0 137 4.4 5.0 SMBJ90A SMBJ90CA NX DX 90.0 100 111 1.0 146 4.1 5.0 SMBJ100A SMBJ100CA NZ DZ 100.0 111 123 1.0 162 3.7 5.0 LITE-ON SEMICONDUCTOR Device Unidirectional Device Bidirectional Device Marking code Working PeakReverse Voltage Maximum Maximum Reverse Voltage Breakdowm voltage Reverse Surge at IRSM VBR Volts (Clamping Current Voltage) Min. Max. @IT( mA) VRSM(V) IRSM(A) Maximum Reverse Leakage at VRWM (UNI) (BI) VRWM(V) SMBJ110A SMBJ110CA PE EE 110.0 122 135 1.0 177 3.4 5.0 SMBJ120A SMBJ120CA PG EG 120.0 133 147 1.0 193 3.1 5.0 SMBJ130A SMBJ130CA PK EK 130.0 144 159 1.0 209 2.9 5.0 SMBJ150A SMBJ150CA PM EM 150.0 167 185 1.0 243 2.5 5.0 SMBJ160A SMBJ160CA PP EP 160.0 178 197 1.0 259 2.3 5.0 SMBJ170A SMBJ170CA PR ER 170.0 189 209 1.0 275 2.2 5.0 SMBJ188A SMBJ188CA PT ET 188.0 209 231 1.0 328 1.83 5.0 SMBJ200A SMBJ200CA PV EV 200.0 224 247 1.0 324 1.9 5.0 SMBJ220A SMBJ220CA PX EX 220.0 246 272 1.0 356 1.7 5.0 350.0 391 432 1.0 567 1.1 5.0 SMBJ350A QG NOTE : 1) Suffix 'A ' denotes 5% tolerance device,no suffix denotes 10 % tolerance device. 2) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . For Uni-directional devices VF max=3.5v at if=50 A ,0.5 sine wave of 8.3 msec .pulse width. IR (uA) Legal Disclaimer Notice SMBJ SERIES Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.