www.clare.com
DS-CPC1217-R03 1
CPC1217
4-Pin SIP OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Part # Description
CPC1217Y 4-Pin SIP (25/tube)
Parameter Rating Units
Blocking Voltage 60 VP
Load Current 200 mA
Max RON 16 Ω
Input Voltage to operate 5-12 V
Applications
Features
Description
Ordering Information
Pin Configuration
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Energy Meters
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
• 100% Solid State
• Voltage-controlled operation
• Matches popular reed relay pin-out
• Designed for use in security systems complying
with EN50130-4
• Small 4-Pin SIP Package
• Arc-Free With No Snubbing Circuits
• 2500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• Auto Pick & Place, Wave Solderable
The CPC1217 is a voltage-controlled, single-pole,
normally open (1-Form-A), optically coupled solid state
relay configuration in a 4-pin Single In-line Package
(SIP). Clare's patented OptoMOS architecture makes
available the optically coupled technology necessary to
activate the output's efficient MOSFET switches while
providing a 2500Vrms input-to-output isolation barrier.
Control of the isolated output is accomplished by
means of a highly effective GaAlAs infrared LED at the
input while the internal resistor in series with the LED
enables the input voltage-controlled operation.
Because the input is solid state there is no need for
snubbers or "catch" diodes to suppress the inductive
flyback transient voltage normally associated with EMR
coils.
CPC1217 Pinout
Switching Characteristics of Normally
Open (Form A) Devices
Approvals
• UL Recognized Component: File # E76270
• EN/IEC 60950 Compliant
• CSA Certified Component: Certificate # 1172007
CONTROL
ILOAD
10%
90%
TON
TOFF
+
+
1234
–+
www.clare.com
2
CPC1217
R03
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings
Parameter Ratings Units
Blocking Voltage 60 VP
Reverse Input Voltage 5 V
Input Control Voltage 15 V
Input Power Dissipation 225 mW
Total Power Dissipation 1800 mW
Isolation Voltage Input to Output 2500 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate Linearly 6.67 mw / ºC
Electrical absolute maximum ratings are at 25°C
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Current
Continuous VIN=5V IL- - 200
mA
Peak t≤10ms ILPK - - 400
On-Resistance 1IL=200mA RON --16
Ω
Off-State Leakage Current VL=60VPILEAK --1μA
Switching Speeds
Turn-On (Output Closed) VIN=5V, VL=10V TON --5
ms
Turn-Off (Output Open) TOFF --5
Output Capacitance VIN=0V, VL=50V; f=1MHz COUT -25 -pF
Input Characteristics @ 25°C
Input Control Voltage
Output Closed
IL=200mA VIN
- - 3.75
V
Recommended Operating Range 5 - 12
Output Open 1- -
Reverse Input Current VIN=-5V IR--10μA
Input Resistor - - 900 1000 1100 Ω
Common Characteristics @ 25°C
Capacitance, Input to Output - - - 1 - pF
1 Measurement taken within 1 second of on time.
Electrical Characteristics
CPC1217
www.clare.com 3
R03
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
35
30
25
20
15
10
5
0
Device Count (N)
On-Resistance (Ω)
7.00 7.15 7.457.30 7.907.60 7.75
CPC1217
Typical On-Resistance Distribution
(TA=25ºC, IL=100mA, VIN=5V)
35
30
25
20
15
10
5
084 86 88 9085 87 89
Blocking Voltage (VP)
Device Count (N)
CPC1217
Typical Blocking Voltage Distribution
(TA=25ºC)
1.17 1.21 1.251.15 1.19 1.23 1.27
Input Voltage (V)
Device Count (N)
25
20
15
10
5
0
CPC1217
Typical Input Voltage for Switch Operation
(TA=25ºC, IL=100mA)
25
20
15
10
5
0
1.15 1.19 1.231.13 1.17 1.21 1.25
Input Voltage (V)
Device Count (N)
CPC1217
Typical VOFF for Switch Dropout
(TA=25ºC, IL=100mA)
0.150 0.180 0.210 0.2400.165 0.195 0.225
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
CPC1217
Typical Turn-On Time
(TA=25ºC, IL=100mA, VIN=5V)
0.40 0.46 0.52 0.580.550.490.43
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
CPC1217
Typical Turn-Off Time
(TA=25ºC, IL=100mA, VIN=5V)
Load Current (mA)
225
200
175
150
125
100
75
50
25
0
CPC1217
Typical Maximum Load Current
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 120100
V
IN
= 5V
Leakage (μA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
-20 0 20 40 60 80 100
CPC1217
Typical Leakage vs. Temperature
Measured Across Pins 1 & 4)
(VL=Max Rated)
Temperature (ºC)
Blocking Voltage (VP)
-40
94
92
90
88
86
84
82
80
-20 0 20 40 60 80 100
Temperature (ºC)
CPC1217
Typical Blocking Voltage
vs. Temperature
VIN = 5V
Turn-On (ms)
-40
0.30
0.27
0.24
0.21
0.18
0.15
0.12
0.09
0.06
0.03
0
-20 0 20 40 60 80 100
Temperature (ºC)
CPC1217
Typical Turn-On vs. Temperature
(IL=100mA)
Turn-Off (ms)
-40
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
VIN = 5V
Temperature (ºC)
CPC1217
Typical Turn-Off vs. Temperature
(IL=100mA)
Input Voltage (V)
Turn-On (ms)
05101520
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
CPC1217
Typical Turn-On vs. Input Voltage
(IL=100mA)
www.clare.com
4
CPC1217
R03
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Input Voltage (V)
Turn-Off (ms)
02 4 6 8 10 12 14 16 18
0.51
0.50
0.49
0.48
0.47
0.46
0.45
0.44
20
CPC1217
Typical Turn-Off vs. Input Voltage
(IL=100mA)
-40
14
12
10
8
6
4
2
-20 0 20 40 60 80 100
Steady State
VIN = 5V
Temperature (ºC)
On-Resistance (Ω)
CPC1217
Typical On-Resistance vs. Temperature
(IL=Max Rated @ Temperature)
Input Voltage (V)
-40 -20 0 20 40 60 80 100
1.45
1.40
1.35
1.30
1.25
1.20
1.15
CPC1217
Typical Input Voltage for
Switch Operation vs. Temperature
(IL=100mA)
Temperature (ºC)
Input Voltage (V)
-40
1.45
1.40
1.35
1.30
1.25
1.20
1.15
-20 0 20 40 60 80 100
CPC1217
Typical Input Voltage for
Switch Dropout vs. Temperature
(IL=100mA)
Temperature (ºC) Load Voltage (V)
Load Current (mA)
200
100
-200
-2.00 -1.50 -0.50 0 1.00 1.50 2.00
150
-100
50
0
-50
-150
-1.00 0.50
CPC1217
Typical Load Current vs. Load Voltage
(TA=25ºC, VIN=5V)
Time
Load Current (A)
10μs
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
1ms100μs 100ms 1s
10ms 10s 100s
CPC1217
Energy Rating Curve
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1217-R03
©Copyright 2008, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
7/16/08
For additional information please visit our website at: www.clare.com
5
MECHANICAL DIMENSIONS
Dimensions:
mm
(inches)
RoHS
2002/95/EC e3
Pb
4-Pin SIP
19.202 ± 0.381
(0.756 ± 0.015)
6.401 ± 0.127
(0.252 ± 0.005)
5.944 ± 0.127 TYP
(0.234 ± 0.005 TYP)
2.642 ± 0.127 TYP
(0.104 ± 0.005 TYP)
0.254 ± 0.013
(0.010 ± 0.0005
)
0.457 ± 0.076 TYP
(0.018 ± 0.003 TYP)
5.080 ± 0127
(0.200 ± 0.005)
5.080 ± 0127
(0.200 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
3.251 ± 0.102
(0.128 ± 0.004)
NOTES:
1. Leadframe thickness does not include plating. (1000 microinches maximum)
2. Pin location tolerances are non
-
accumulative.
PIN 1
MANUFACTURING INFORMATION
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
