TruStability® Board Mount
Pressure Sensors
HSC SeriesHigh Accuracy, Compensated/Amplified
±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to ±150 psi
Digital or Analog Output
Datasheet
2sensing.honeywell.com
TruStability® Board Mount Pressure Sensors
The TruStability® High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric
analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-
linearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at
approximately 1 kHz for analog and 2 kHz for digital.
The HSC Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for
operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference
and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an
output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the
two pressure ports.
The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.
Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above
40 mbar | 4 kPa | 20 inH2O.
All products are designed and manufactured according to ISO 9001 standards.
stability • accuracy • flexibility • small size
What makes our sensors better?
Stability and reliability
Industry-leading accuracy of ±0.25 %FSS BFSL
Port and housing options simplify integration
Wide pressure range, from ±1.6 mbar to ±10 bar |
±160 Pa to ±1 MPa | ±0.5 inH2O to ±150 psi
Small package size
Extremely low power consumption
,
Table of Contents
Features and Benefits .................. 3-5
Potential Applications ....................6
General Specifications ................. 7-8
Analog Operating Specifications ...........9
Digital Operating Specifications ...........10
Transfer Function Limits .................11
Total Error Band Values .................12
Nomenclature and Order Guide ...........13
Pressure Range Specifications
±1.6 mbar to ±10 bar .................. 14
±160 Pa to ±1 MPa ....................15
±0.5 inH2O to ±150 psi .................16
Available Standard Configurations .......17-18
Dimensional Drawings
DIP Packages ..................... 19-21
SMT Packages ................... 21-24
SIP Packages .....................24-29
Pinouts, PCB Layouts ...................30
TruStability® Board Mount Pressure Sensors
Portfolio Overview .....................31
Additional Information. . . . . . . . . . . . . . . . . . . 32
3
sensing.honeywell.com
PROPRIETARY HONEYWELL TECHNOLOGY
Combines high sensitivity with high overpressure and burst pressure while
providing industry leading stability—performance factors that are difficult to
achieve in the same product; this gives the customer more flexibility in sensor
implementation and reduces the customer design requirements for protecting the
sensor without sacrificing the ability to sense very small changes in pressure.
PROTECTED BY MULTIPLE GLOBAL PATENTS
INDUSTRY-LEADING LONG-TERM STABILITY
Even after long-term use and thermal extremes, the sensor’s stability remains best
in class:
• Minimizes system calibration needs.
• Improves system performance.
• Helps support system uptime by minimizing the need to service or replace the
sensor during its application life.
TOTAL ERROR BAND (TEB)
Honeywell specifies TEB—the most comprehensive, clear, and meaningful
measurement—that provides the sensor’s true performance over a compensated
range of 0 °C to 50 °C [32 °F to 122 °F] (see Figure 1):
• Minimizes individually testing and calibrating every sensor, decreasing
manufacturing time and process costs.
• Improves system accuracy.
• Provides enhanced sensor interchangeability—there is minimal part-to-part
variation in accuracy.
Features
and Benefits
+
+
+
+
+
+
+
Pressure Hysteresis
+
+
Pressure Non-Repeatability
All Possible Errors
+
+
+
Offset
+
+
Full Scale Span
+
+
Thermal Effect on Offset
+
+
Thermal Effect on Span
+
Thermal Hysteresis
Total
Error Band
Accuracy
=
=
Pressure Non-Linearity
Figure 1. TEB Components for TruStability® Board Mount Pressure Sensors
4sensing.honeywell.com
Features
and Benefits
INDUSTRY-LEADING ACCURACY
Extremely tight accuracy of ±0.25 %FSS BFSL (Full Scale Span Best Fit Straight
Line) reduces software needed to correct system inaccuracies, minimizing system
design time:
• Avoids additional customer calibration.
• Helps to improve system efficiency.
• Often simplifies software development.
HIGH BURST PRESSURES
• Promotes system reliability and reduces potential system downtime.
• Can simplify the design process.
HIGH WORKING PRESSURE RANGES
Allows ultra-low pressure sensors to be used continuously well above the
calibrated pressure range.
INDUSTRY-LEADING FLEXIBILITY
Modular, flexible design with many package styles (with the same industry-
leading stability), pressure ports, and options simplify integration into the device
manufacturer’s application.
WIDE VARIETY OF PRESSURE RANGES
From ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to 150 psi provide
support for many unique applications.
MEETS IPC/JEDEC J-STD-020D.1 MOISTURE SENSITIVITY LEVEL
1 REQUIREMENTS
• Allows the customer to avoid the thermal and mechanical damage during
solder reflow attachment and/or repair that lesser rated products would incur.
• Allows unlimited floor life when stored as specified (<30 ºC/85 %RH),
simplifying storage and reducing scrap.
• Never requires lengthy bakes prior to reflow.
• Stable and usable shortly after reflow process allows for lean manufacturing.
OPTIONAL INTERNAL DIAGNOSTIC FUNCTIONS
• May reduce the need for redundant sensors in the system.
• Detects most internal failures including burst sensors.
ENERGY EFFICIENT
Extremely low power consumption (less than 10 mW, typ.):
• Reduces system power requirements.
• Enables extended battery life.
• Optional sleep mode available upon special request.
5
sensing.honeywell.com
Features
and Benefits
OUTPUT: RATIOMETRIC ANALOG; I2C- OR SPI-COMPATIBLE
14-BIT DIGITAL OUTPUT (MIN. 12-BIT SENSOR RESOLUTION)
Accelerates performance through reduced conversion requirements and the
convenience of direct interface to microprocessors.
SMALL SIZE
Miniature 10 mm x 10 mm [0.39 in x 0.39 in] package is very small when
compared to many board mount pressure sensors:
• Occupies less area on the PCB.
• Typically allows for easy placement on crowded PCBs or in small devices.
REACH AND ROHS COMPLIANT
LIQUID MEDIA OPTION
• Provides robustness in environments with condensing humidity.
• Compatible with a variety of non-ionic fluids.
• Available for pressure ranges above 40 mbar | 4 kPa | 20 inH20.
6sensing.honeywell.com
MEDICAL
AIRFLOW MONITORS
ANESTHESIA MACHINES
BLOOD ANALYSIS MACHINES
GAS CHROMATOGRAPHY
GAS FLOW INSTRUMENTATION
KIDNEY DIALYSIS MACHINES
OXYGEN CONCENTRATORS
PNEUMATIC CONTROLS
RESPIRATORY MACHINES
SLEEP APNEA EQUIPMENT
VENTILATORS
SPIROMETERS
NEBULIZERS
HOSPITAL ROOM AIR PRESSURE
INDUSTRIAL
BAROMETRY
FLOW CALIBRATORS
GAS CHROMATOGRAPHY
GAS FLOW INSTRUMENTATION
HVAC
LIFE SCIENCES
PNEUMATIC CONTROL
VAV (VARIABLE AIR VOLUME) CONTROL
CLOGGED HVAC FILTER DETECTION
HVAC TRANSMITTERS
INDOOR AIR QUALITY
Potential Applications