ATC 100 B Series Porcelain Superchip (R) Multilayer Capacitors * Case B Size (.110" x .110") * Capacitance Range 0.1 pF to 1000 pF * High Q * Ultra-Stable Performance * Low ESR/ESL * High Self-Resonance * Low Noise * Established Reliability (QPL) * Available with * Extended WVDC Encapsulation Option* up to 1500 VDC ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC, the industry leader, offers new improved ESR/ESL performance for the 100 B Series RF/Microwave Capacitors. This Series is now available with extended operating temperatures up to 175C. High Density porcelain construction provides a rugged, hermetic package. QUALITY FACTOR (Q): greater than 10,000 at 1 MHz. ATC offers an encapsulation option for applications requiring extended protection against arc-over and corona. 0.1 pF to 470 pF: 106 Megohms min. @ +25C at rated WVDC. 105 Megohms min. @ +125C at rated WVDC. 510 pF to 1000 pF: 105 Megohms min. @ +25C at rated WVDC. 104 Megohms min. @ +125C at rated WVDC. IR above +125C is derated by one order of magnitude. Typical functional applications: Bypass, Coupling, Tuning, Feedback, Impedance Matching and DC Blocking. Typical circuit applications: UHF/Microwave RF Power Amplifiers, Mixers, Oscillators, Low Noise Amplifiers, Filter Networks, Timing Circuits and Delay Lines. *For leaded styles only. ENVIRONMENTAL TESTS ATC 100 B Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: MIL-STD-202, Method 107, Condition A. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): +90 20 PPM/C (-55C to +125C) +90 30 PPM/C (+125C to +175C) INSULATION RESISTANCE (IR): WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. AGING EFFECTS: None MOISTURE RESISTANCE: MIL-STD-202, Method 106. PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). LOW VOLTAGE HUMIDITY: CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. OPERATING TEMPERATURE RANGE: LIFE TEST: TERMINATION STYLES: 0.1 to 330 pF: from -55C to +175C 360 to 1000 pF: from -55C to +125C MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage Applied: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-807 Rev. N 3/10 ATC 100 B Capacitance Values 1500 500 1500 B, C, J, K, M F, G, J, K, M F, G, J, K, M 300 1000 511 561 621 681 751 821 911 102 510 560 620 680 750 820 910 1000 VOLT 240 270 300 330 360 390 430 470 300 EXT. 1000 EXT 241 271 301 331 361 391 431 471 STD. VOLT 120 130 1500 150 160 180 200 220 200 600 EXT 121 131 500 151 161 181 201 221 RATED WVDC F, G, J, K, M 100 VOLT 500 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 TOL. 300 50 EXT B, C, D B, C, D 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 111 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) TOL. VOLTAGE B, C 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) EXTENDED EXTENDED VOLTAGE B 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 TOL. EXTENDED VOLTAGE 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) EXTENDED VOLTAGE 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 TOL. EXTENDED VOLTAGE CAP. CAP. CODE (pF) VRMS = 0.707 X WVDC * SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. * ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS. ATC PART NUMBER CODE ATC100 B 91 0 J W 500 X C Series Packaging T - Tape and Reel, 1000 pc. qty.* TV - Vertical Orientation of Product, Tape and Reel, 1000 pc. qty.* C - ATC Cap-Pac(R), 100 pc. qty. std.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance Laser Marking CAPACITANCE TOLERANCE Code Tol. B C D F G 0.1 pF 0.25 pF 0.5 pF 1% J K WVDC Termination Code M 2% 5% 10% 20% The above part number refers to a 100 B Series (case size B) 91 pF capacitor, J tolerance (5%), 500 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and ATC Cap-Pac(R) packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 w Consult factory for additional performance data. T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 B Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE BODY DIMENSIONS INCHES (mm) OUTLINES MIL-PRF55681 CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) WIDTH (W) .110 .015 (2.79 0.38) Tin /Lead, Solder Plated over Nickel Barrier Termination T .110 +.020 -.010 (2.79 +0.51 -0.25) .110 .015 (2.79 0.38) Heavy Tin/Lead Coated, over Nickel Barrier Termination T .110 +.035 -.010 (2.79 +0.89 -0.25) .110 .015 (2.79 0.38) T .110 +.020 -.010 (2.79 +0.51 -0.25) .110 .015 (2.79 0.38) T .110 +.020 -.010 (2.79 +0.51 -0.25) Y 100B W CDR14BG B Solder Plate W L Y 100B P CDR14BG B W Pellet L Y 100B T N/A B W Solderable Nickel Barrier L Y 100B CA CDR13BG B Gold Chip W L LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) .102 (2.59) max. OVERLAP (Y) .015 (0.38) .010 (0.25) RoHS Compliant Tin Plated over Nickel Barrier Termination RoHS Compliant Gold Plated over Nickel Barrier Termination Length ( LL ) TL 100B MS CDR21BG LL B WL .120 (3.05) max. W L Microstrip MATERIALS Width ( WL ) Thickness ( TL ) T TL 100B AR CDR22BG LL B WL .135 .015 (3.43 0.38) W T L Axial Ribbon LL 100B RR CDR24BG B Radial Ribbon .110 .015 (2.79 0.38) WL W L T .250 (6.35) min. .093 .005 .004 .001 (2.36 (.102 0.13) .025) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal N/A .102 (2.59) max. LL 100B RW CDR23BG * * B Radial Wire T L W .145 .020 (3.68 0.51) LL 100B AW CDR25BG ** B W * L Axial Wire T Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics document ATC 001-818. A M E R I C A N 3 T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 B Non-Magnetic Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE MIL-PRF55681 100B WN Meets Requirements 100B 100B 100B 100B 100B 100B 100B BODY DIMENSIONS INCHES (mm) OUTLINES Y T L WIDTH (W) THICKNESS (T) .110 +.025 -.010 (2.79 +0.64 -0.25) .110 .015 (2.79 0.38) .110 +.035 -.010 (2.79 +0.89 -0.25) .110 .015 (2.79 0.38) .110 +.025 -.010 (2.79 +0.64 -0.25) .110 .015 (2.79 0.38) OVERLAP (Y) MATERIALS Tin /Lead, Solder Plated over Non-Magnetic Barrier Termination .102 (2.59) max. .015 (0.38) .010 (0.25) Heavy Tin/Lead Coated, over Non-Magnetic Barrier Termination RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination Length ( LL ) TL WL Non-Mag Microstrip .120 (3.05) max. W L Width ( WL ) Thickness ( TL ) T TL 135 .015 (3.43 0.38) LL WL Non-Mag Axial Ribbon W T L LL B Non-Mag Radial Ribbon .110 .015 (2.79 0.38) WL W L .250 (6.35) min. .093 .005 .004 .001 (2.36 (.102 0.13) .025) .500 (12.7) min. #26 AWG., .016 (.406) dia. nominal N/A T .102 (2.59) max. LL B Non-Mag Radial Wire Meets Requirements BN W LENGTH (L) LL Meets Requirements RN T Y Solderable Barrier Meets Requirements FN W L B Non-Mag Meets Requirements AN T L B Non-Mag Pellet Meets Requirements MN W Y Meets Requirements TN W/T IS A TERMINATION SURFACE B Non-Mag Solder Plate Meets Requirements PN CASE SIZE & TYPE LEAD AND TERMINATION DIMENSIONS AND MATERIALS * * T L W .145 .020 (3.68 0.51) LL B ** Non-Mag Axial Wire W L * T Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions Case B Vertical Mount 0.1 pF W 0J 91 T 910J Horizontal Electrode Orientation A 0.2 pF 0.3 to 510 pF Vertical Electrode Orientation B > 510 pF B B Min. C Min. D Min. Normal .065 .050 .075 .175 High Density .045 .030 .075 .135 Normal .090 .050 .075 .175 High Density .070 .030 .075 .135 Normal .110 .050 .075 .175 High Density .090 .030 .075 .135 Normal .120 .050 .075 .175 High Density .100 .030 .075 .135 C Horizontal Mount All values D A M E R I C A N 4 A Min. Pad Size Cap Value T L W L w .130 .050 .075 .175 High Density .110 .030 .075 .135 T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w Normal C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 B Performance Data ESR VS. CAPACITANCE ATC SERIES 100,, CASE B Q VS. CAPACITANCE ATC SERIES 100, CASE B 100000 1 150 MHz 1000 MHz 0.1 1000 Q ESR (Ohms) 10000 500 MHz 500 MHz 1000 MHz 100 150 MHz (Typical) (Typical) 0.01 1 10 10 100 1 10 100 CAPACITANCE (pF) (1.0 pF to 51 pF) CAPACITANCE (pF) (1.0 pF to 51 pF) ESR VS. CAPACITANCE ATC SERIES 100, CASE B Q VS. CAPACITANCE ATC SERIES 100, CASE B 1 1000 Q ESR (Ohms) 150 MHz 1000 MHz 0.1 100 500 MHz 500 MHz 150 MHz 1000 MHz (Typical) (Typical) 0.01 10 100 10 1000 10 100 CAPACITANCE (pF) (56 pF to 1000 pF) SERIES RESONANCE VS. CAPACITANCE ATC SERIES 100, CASE B CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 100, CASE B 2 % CHANGE IN CAPACITANCE FREQUENCY (GHz) 100 10 1 (Typical) 0.1 0.1 1 10 100 1.5 TC= +90 20 PPM/C (-55C to +125C) TC= +90 30 PPM/C (+125C to +175C) 1 0.5 0 -0.5 -1 -55 1000 -35 -15 5 CAPACITANCE (pF) T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w 45 65 85 105 125 145 165 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w 25 TEMPERATURE (Degrees C) A M E R I C A N 5 1000 CAPACITANCE (pF) (56 pF to 1000 pF) . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 B Performance Data CURRENT RATING VS. CAPACITANCE ATC SERIES 100,CASE CASE B ATC SERIES 100, B CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE B 100 RMS CURRENT (Amps) RMS CURRENT (Amps) 100 10 1000 MHz 500 MHz 1 150 MHz 30 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.1 0.1 1 10 The current rating is based on a 65C mounting surface and a device thermal resistance of 20C/W. A power dissipation of 3W will result in a case temperature of 125C. 10 150 MHz 500 MHz 1000 MHz 30 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 10 100 100 1000 CAPACITANCE CAPACITANCE (pF) (56 pF to 1000 pF) CAPACITANCE (pF) (0.1 pF to 51 pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE B, EXTENDED VOLTAGE 100 RMS CURRENT (Amps) 10 1000 MHz 500 MHz 150 MHz 30 MHz 1 0.1 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 0.01 0.1 1 10 CAPACITANCE (pF) 100 1000 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.