OS-CON Line-up Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability Technical data Series system diagram Selection guide Guidelines and precautions Surface mount type SVPF SVPG Surface mount type SVPF SVPE SVPS SVPD SVPC SVPB SVPA Items Condition Rated voltage (V) Surge voltage Capacitance tolerance Dissipation Factor (DF) (V) Room temperature () 120Hz/20 Leakage current1 Equivalent series resistance (ESR) 100kHz to 300kHz/20 -55 SEQP SEP Within 1.5 times of the initial limit C/C Within 20% of the initial value DF Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) DF Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) Within 10% of the initial value Within 1.3 times of the initial limit ESR Marking and dimensions 0.2max B6, C6 size PF E7, E12, F12 size SVPF Rated capacitance (unit : mm) W H 82 25 SVPF Series D 003 Guidelines and precautions L R Rated voltage Size code D Selection guide Size list F RV 16 RV : Rated voltage 20 25 35 10 E7 C6 22 27 B6 E7 39 47 E12 C6 56 B6 C6 68 82 50 C6 18 F12 E7 B6 100 E12 E7 120 F12 C6 180 C6 270 E7 E7 330 E12 F12 390 35 Within 1.5 times of the initial limit 1 When measured values are questionable, measure after voltage processing mentioned below. Voltage processing: Apply voltage for 120 minutes at 105. 2 Please refer to page 25 for reflow soldering conditions. POSCAP Line-up Catalog Deletion and EOL models Within the initial limit ESR VPS (230 X 75s) Polarity marking Cathode Case No. Surface mount type Within 1.5 times of the initial limit ESR C/C heat2 Catalog Deletion and EOL series Technical data 0.75 to 1.25 Within 20% of the initial value DF 60, 90 to 95%RH, 1,000h, No-applied voltage 57 0.75 to 1.25 LC Damp heat(Steady state) -55 to 105 50 40 Please see the attached characteristics list Z/Z20 105 Z/Z20 105, 5,000h, Rated voltage applied 35 29 Please see the attached characteristics list C/C Endurance 25 Please see the attached characteristics list Rated voltage applied, after 2 minutes P C Radial lead type SEPF SEPC 23 M : 20 120Hz/20 Based the value at 100kHz, 20 20 18 - SVP SXE Specifications 16 - Category temperature range () Resistance to soldering SVQP RoHS directive/Halogen-free compliant High voltage50V Large capacitance1,000F Endurance 105 5,000h Specifications Characteristics of impedance ratio at high temp. and low temp. SXV Series E12 560 E12 1000 F12 F12 0.5 0.2 H L 0.1 -0.4 W 0.2 C 0.2 R P 0.2 B6 5.0 5.9 5.3 5.3 6.0 0.60.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.60.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.60.8 3.2 E12 8.0 11.9 8.3 8.3 9.0 0.81.1 3.2 F12 10.0 12.6 10.3 10.3 11.0 0.81.1 4.6 OS-CON Line-up SVPF series characteristics list C6 E7 E12 F12 Rated capacitance (F) ESR(m) (max) 100kHz to 300kHz/20 Rated ripple current 100kHz (mArms) at 105 DF (% max) Leakage current (A)(max) After 2 minutes Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition 25 27 40 2450 12 135 20SVPF56MX 20 56 30 2800 12 224 16SVPF82M 16 82 27 3000 12 262 50SVPF10M 50 10 40 2500 12 100 SXV SVPG Technical data 25SVPF27MX Fundamental structure Characteristics Reliability 35SVPF22M 35 22 35 2600 12 154 25SVPF47M 25 47 30 2800 12 235 25SVPF56M 25 56 30 2800 12 280 20SVPF120M 20 120 25 3200 12 480 16SVPF180M 16 180 22 3300 12 576 50SVPF18M 50 18 35 2700 12 180 35SVPF39M 35 39 30 2800 12 273 SVQP 25SVPF82M 25 82 28 3000 12 410 SVP 25SVPF100M 25 100 24 3200 12 500 20SVPF180M 20 180 25 3200 12 720 16SVPF270M 16 270 22 3300 12 864 50SVPF39M 50 39 25 3800 12 390 35SVPF82M 35 82 20 4000 12 574 25SVPF180M 25 180 16 4650 12 900 20SVPF390M 20 390 14 4950 12 1560 POSCAP Line-up 16SVPF560M 16 560 14 4950 12 1792 Guidelines and precautions 50SVPF68M 50 68 20 4300 12 680 35SVPF120M 35 120 18 4400 12 840 25SVPF330M 25 330 14 5000 12 1650 20SVPF560M 20 560 12 5400 12 2240 16SVPF1000M 16 1000 12 5400 12 3200 SVPF Surface mount type B6 Rated voltage (V) Part number Series system diagram SVPE SVPS SVPD SVPC SVPB SVPA SXE Radial lead type Size code Selection guide Guidelines and precautions SEPF SEPC SEQP SEP Catalog Deletion and EOL series Selection guide Technical data Recommended land pattern dimension of PWB (unit : mm) C Size code a b a B6 1.4 C6 E7 b c 7.4 1.6 2.1 9.1 1.6 2.8 11.1 1.9 E12 2.8 11.1 1.9 F12 4.3 13.1 1.9 Surface mount type Frequency coefficient for ripple current Frequency 120Hz f 1kHz 1kHz f 10kHz 10kHz f 100kHz 100kHz f 500kHz Coefficient 0.05 0.3 0.7 1 Catalog Deletion and EOL models 36