High Voltage, Photo DEMos Relay KAQW214/214A UL 1577/ UL 508 (File No.E108430), FI EN60950 (File No.FI13698) Features KAQW214 1. Normally Open, Single Pole Single Throw 2. Control 400VAC or DC Voltage 3. Switch 130mA Loads 4. LED control Current, 5mA 5. Low ON-Resistance 6. dv/dt, >500V/ms Unit : mm TOLERANCE : 0.2mm 7. Isolation Test Voltage, 3750VACrms KAQW214A Absolute Maximum Ratings (Ta=25C) Emitter ( Input ) Detector ( Output ) Reverse Voltage.................................5.0V Output Breakdown Voltage ...............400V Continuous Forward Current ...............50mA Continuous Load Current ...............130mA Peak Forward Current ...........................1A Power Dissipation ........................500mW Power Dissipation ........................100mW Unit : mm TOLERANCE : 0.2mm Derate Linearly from 25C ............1.3mW/C General Characteristics Turn on/ Turn off time Isolation Test Voltage...............3750VACrms Storage Temperature Range ...-40C to +125C Isolation Resistance Operating Temperature Range...-30C to +85C 10 Vio=500V, Ta=25C ........................10 Junction Temperature........................100C Total Power Dissipation ..................550mW Soldering Temperature, Derate Linearly from 25C ............2.5mW/C 2mm from case, 10 sec .....................260C Electro-optical Characteristics Parameter (Ta=25C) Symbol Conditions Min. Typ. Max. Unit 1.2 1.5 V 5 mA Emitter (Input) VF IF =10mA Operation Input Current IFON VL =20V, IL =100mA, t =10mS Recovery Input Current IFOFF VL =20V, IL 5uA 0.2 400 Forward Voltage mA Detector (Output) Output Breakdown Voltage VB IB=50uA Output Off-State Leakage ITOFF VT =100V, IF =0mA V 0.2 uA I/O Capacitance CISO IF =0, f =1MHZ 6 ON Resistance RON IL =100mA, IF =10mA 20 30 Turn-On Time TON IF =10mA, VL =20V 0.3 1.0 ms Turn-Off Time TOFF t =10ms, IL =100mA 0.7 1.5 ms Mos Relay Schematic and Wiring Diagrams Type Schematic Output configuration Load Connection AC/DC - KAQW214 & 2a KAQW214A 94 1 c 2002 cosmo ELECTRONICS CORPORATION http://www.cosmo-ic.com Wiring Diagrams pF KAQW214/214A Data Curve Fig.3 Turn on time vs. ambient temperature Load voltage: 400V(DC) LED current: 5mA Continuous load current: 130mA(DC) Turn on Time Msec Fig.2 On resistance vs. ambient temperature Across terminals 5,7 and 6,8 pin LED current: 5mA Continuous load current: 130mA(DC) On Resistonce () Load Current (mA) Fig.1 Load current vs. ambient temperature Allowable ambient temperature: -40C to +85C Ambient Temperature Ta (C) Ambient Temperature Ta (C) Fig.5 LED operate vs. ambient temperature Load voltage: 400V(DC) Continuous load current: 130mA(DC) Fig.6 LED turn off current vs. ambient temperature Load voltage: 400V(DC) Continuous load current: 130mA(DC) Ambient Temperature Ta (C) Ambient Temperature Ta (C) Ambient Temperature Ta (C) Fig.8 Voltage vs. current characteristics of output at MOS FET portion Measured portion: across terminals 5,7 and 6,8 pin Ambient temperature: 25C Fig.9 Off state leakage current Across terminals 5,7 and 6,8 pin Ambient temperature: 25C LED Dropout Voltage (V) Off State Leakage Current Fig.7 LED dropout voltage vs. ambient temperature LED current: 5 to 50mA LED Turn off Current (mA) Tun off Time Msec LED Operate Current (mA) Fig.4 Turn off time vs. ambient temperature LED current: 5mA; Load voltage: 400V(DC) Continuous load current: 130mA(DC) Ambient Temperature Ta (C) Ambient Temperature Ta (C) Fig.12 Applied voltage vs. output capacitance Across terminals 5,7 and 6,8 pin Frequency: 1MHz Ambient temperature: 25C Output CapaCitance (pF) Fig.11 LED forward current vs. turn off time Across terminals 5,7 and 6,8 pin; Load voltage: 400V (DC); Continuous load current: 130mA (DC); Ambient temperature: 25C Turn on Time Msec Turn on Time Msec Fig.10 LED forward current vs. turn on time Across terminals 5,7 and 6,8 pin; Load voltage: 400V (DC); Continuous load current: 130mA (DC); Ambient temperature: 25C Load Voltage (V) LED Forward Current (mA) LED Forward Current (mA) Applied Voltage (V) c 2002 cosmo ELECTRONICS CORPORATION http://www.cosmo-ic.com 95