SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Surface Mount Type Series: G Features Super Low-ESR (3 m) High temperature reflow soldering applicable (Peak : 260 C 10s, main heating : 230 C 40s) RoHS directive compliant Specifications Category Temp. Range -40 C to +105 C Rated W.V.Range 2 V.DC to 2.5 V.DC Nominal Cap.Range 330 F to 560 F Capacitance Tolerance 20 % (120 Hz/+20 C) DC Leakage Current I < 0.1 CV (A) 2 minutes < 0.06 (120 Hz/+20 C) tan d Rated Working Voltage x 1.25 (15 C to 35 C) Surge Voltage After applying rated working voltage for 1000 hours at 105 C2 C, and then being stabilized at +20 C, capacitor shall meet the following limits. Endurance Capacitance change 10% of initial measured value tan d < Initial specified value DC leakage current < Initial specified value Capacitance change of initial measurd value 2 V.DC tan d < 200 % of initial specified value DC leakage current < Initial specified value After storing for 500 hours at 60 C, 90 % Moisture resistance +70, -20 % Marking Cap. Polarity bar (Positive) Lot No. Dimensions in mm(not to scale) W.V. code (Unit : mm) (Unit : mm) 2 terminals 3 terminals - + + H H - P P L L W1 W2 + W2 W2 W2 - P3 P1 L0.2 W10.2 W20.1 H0.1 P0.3 7.3 4.3 2.4 1.9 1.3 Externals of figure are the reference. W1 P4 P2 P1 L0.2 W10.2 W20.1 H0.1 P10.3 P20.1 P30.2 P40.2 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4 Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Nov. 2012 - EEF-11 - SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Standard Products Series & Size Code CapaciRated tance W.V. (20 %) (V.DC) (F) 2 GX 2.5 330 470 470 560 560 470 470 Case Size Specification 1 L (mm) 7.3 7.3 7.3 7.3 7.3 7.3 7.3 W (mm) 4.3 4.3 4.3 4.3 4.3 4.3 4.3 H (mm) 1.9 1.9 1.9 1.9 1.9 1.9 1.9 Ripple current (Ar.m.s.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 2 ESR ( max.) 0.003 0.003 0.003 0.003 0.003 0.003 0.003 Part number 3 Reflow condition : 260 C [Proposal] EEFGX0D331R EEFGX0D471R EEFGX0D471L EEFGX0D561R EEFGX0D561L EEFGX0E471R EEFGX0E471L The number of terminals 2 3 Min. Packaging Q'ty (pcs) 3500 3500 3500 3500 3500 3500 3500 1: Ripple current (100 kHz/ +20 to +105 C ), 2: ESR (100 kHz/+20 C) 3: Please refer to the page of "Mouting Specifications". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Nov. 2012 - EEF-12 -